starview pvr the box

Hi There jbvideo, Thanks for your help.

I have a question. Should I down load BoxPVR_E_v4500_06Jul.bin or BoxPVR_E_v4506_15Oct.rar ??? .....from the 4shared site.

Cheers

 

Hi
Load the latest v4.506_15thOct version.
jbvid

 

Nice one I'll get a cable in the morning.

Let you know how I get on.

Cheers

 

jbvideo you are a genius.

I used a usb cable and after working it out hey presto.

If it helps anybody....You must copy new firmware into the firmware folder. This took me 15mins to work out.

Keep up the good work

PS Is the channel editor_1044 any good???? if so how would one download it??

 

Is there any work on new firmware being developed for this??

 

Hi, I'm also having problems with Starview The Box PVR. When I record, some things come out OK - some things don't. It might playback up until a certain point in the recording and then freezes i.e. won't play beyond this point. Some recording don't play back at all. I noticed a few others on this site with same problem. Does anybody know why this happens ? I tried with 2 different Hard Drives and still the same result. I had to set Jumpers to Cable Select as Drives aren't detected on Master setting but I don't suppose this matters. Any help much appreciated.
p.s.
JBVIDEO - I see you wrote guides on this. Are you not having this problem ?

 

Hi
Glad you are sorted, the channel editor is in the 'eko.4shared link' which is in an earlier post in this thread and its called 'SV Channel edit', its not brilliant and I prefer to alter my own channel list using the PVR's own menu system then save my final to the H/D via the menu system, which is a safe backup.
jbvid

 

Hi
I wrote some guides, and found out most by experimenting, I am not having problems with mine, the only fault I have is that the EPG is slow. Your problems won't be hard drive related and I have mentioned this many times in different threads. You must have a GOOD incoming signal strength because you are going through 2 tuners, so to test this remove all splitters etc and connect the suppliers cable only just to the main tuner (ie no loop cable connected) and do some test recordings. Take the PVR to a mates and try it, get a mate to bring his to your house to try it, there are loads of possibilities, you just need to think about them and try them. (Process of elimination)
jbvid

 

jb,

All is OK, but I can't name my channels. As soon as I try to change the name with the first letter, eg When I try to change FAV1 to say sport, as soon as I press 's' everything goes blank and I have to turn off at the back to reset.........Any ideas???

Cheers

 

I'm sure i've read somewhere that you can't change them, I never tried, not bothered about that anyway as its not really important.
bye
jbvid

 

Was wondering if somebody could help me out. I have the starview pvr and am using it in cork Ireland. it is running BOXPVR_E_v4506_15Oct.bin

The problem I am having is the epg will only display maybe 1 to 2 hours of listings. I have left the epg on for up to half an hour and it still will not display any more programs. Is there some troubleshooting I can do to resolve this?

Also is there a newer .bin file I could download to try and resolve it.

I have also tried to re-load the flash but no improvement.

Thanks.

 

oh and one more thing, can you use a channel dump file from the starview box on the starview pvr ?

 

Hi
No newer file , epg is crap got to wait for new S/W.
I have put the correct editor in the Starview_PVR downloads section (SVCE)
eko4 shared

jbvid

 

Is there any word on new firmware being developed? The box is great but the epg is so slow even just flicking through channels.

 

Hi does the starview pvr work with Chorus/NTL or upc in ireland..



thanks for any help

 

Nando9
If you Back up your current channel data to your PVR hard drive using the HDD Interface menu and then copy the file to your pc you can edit, sort, rename all your channels, favorites etc. using the Starview Channel Editor {SVCE_1044

 

When you have sorted and edited,renamed your channels and favorites on your pc, save the new file and copy it back to your PVR hard drive and upgrade your new channel data in the HDD Interface menu.

 

OK ............I'll try soon. Let you know how I get on.

Cheers

 

Hi, I've read through this thread and a few others and have a couple of questions i hope someone will be able to answer.

I'm having the same problem that a few others have mentioned, i.e. playback of recorded programmes freezing or jerky video/audio.
I've seen the answers by jb explaining that its probably a lack of signal, to get rid of splitters etc, and that i also need a loop trough from video 1 out to video 2 input.

I've got my box signal set up with a four way splitter, one to the pc, one to a dbox that i send upstairs with an av sender, and two to the pvr box, one in cable 1 input and the other in cable 2 input, do i still need the second input into cable 2 if i have a loop through from video 1 output, or do i only need one signal feed into the cable 1 input?

How do other people have theirs set up without using a splitter if they need to use the feed for broadband or multiple boxes?

Is there such a thing as a cable signal amplifier like you can get for terrestrial signals, if so does anyone recommend a good one?

Thanks in advance, doveslad.

 

Hi
Im not surprised you are having problems if you have a 4way splitter going to all that equipment. I am surprised you have any signal left to watch anything at all, you just have to get rid of the 4way to get a good signal or stay with a crap signal, its up to you, boosters, not heard a success story about any of those yet, Argos seem to get them all back because they don't work. IMHO I would only use one splitter or even prove the point on the PVR without a splitter at all, for Max try (a 3 way only 1 in 2 out) then try using your PVR to record and prove the point, just use the short loop cable to tuner 2
jbvid