Starview Real or Clone - i cant work it out! HELP

Click on the link, it will bring you to the Library, now you will see folder's, the 7th one down say's Starview - click that one and now you will see folders Documentation, Firmware, Software - click on firmware and you will now see Bin Files - the 2nd one down is the file you want for a clone box CrypStar-v1.4Core257Bin go to the right and download the bin file and save somewhere you can easily find it, when that is done, go back and download GTRom V4.00rar from the software folder.

Eamo's FTA Library http://eko.4shared.com/

 

can any1 help me out i have a sv box with 18x7 vents but the processor heatsink has straight lines on it scarts r on the left hand side is this a clone box hope some 1 can help me out on this one thanks

 

It is a clone

 

so its no good then mate

 

Yes it is alright at the present time, you can keep it up and running with the recent release thanks to sunrise of the clone safe firmware, it's called CryptStar-1.4-Core257Bin for clones. Flash your box with that and away you go no problem, fully auto-rolling - it is fine. Find it here in the library go into Starview folder 7th down then into firmware 2nd down and there it is 2nd file down. >>>>>>>>>>>>>>>>>

Eamo's FTA Library http://eko.4shared.com/

 

what leads do i need to go from box to pc mate thanks

 

Hi eso - Check these links, the NULL MODEM is what you want it is very important that you get the correct one, they are commonly referred to as RS232 but one is a straight serial and is useless to you this is the one and also info. on adaptor depending on your PC port connection as newer PCs do not have the connection :-

NULL MODEM CABLE DB9F to DB9F

http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6

If your pc does not have a serial port you will need a USB to serial port adapter to use in conjunction with the null modem cable.

USB Adapter two links (one keeps expiring)

http://www.maplin.co.uk/Module.aspx?Modu...erial Adaptor

These two cable links are only for reference as they can be purchased a lot cheaper on fleabay.

http://www.maplin.co.uk/module.aspx?ModuleNo=29968&doy=14m4

Updating Firmware

Connect your box and PC with a Null modem cable and switch on the cable box and put it on STANDBY.
(The Starview does not need to be connected to TV to update it with GTROM)

Open GTROM Loader software make sure that you set the correct COM PORT
that matches the one that is being used

Make sure App file only is selected, then click Bin File & browse to the firmware where you downloaded it to on your PC.

Run the GTROM loader by pressing Download and you will see the % progress increase
then Download completed message on your PC.
Wait until you see the DOWNLOAD COMPLETE pop up on your PC before
removing the NULL MODEM CABLE. The Starview will then reboot

Disconnect from PC and connect back up to the TV


Also check out and look at this page for recognition purposes :->>>

http://forums.afterdawn.com/thread_view.cfm/653745#3968302

They are exactly the same for both boxes.

 

thank u your a very helpfull person thanks so much

 

You are very welcome eso, good luck and take care. Good night

 

Well done Malci lol ... Patience is a virtue

 

Thank you Celtic, just popped in to have a look around, Try my best - to be honest the site is my way of chilling out anyway - got to go, someone breathing down my kneck - Take care lol

 

MENU OK
FACTORY SETTINGS OK
0000
DELETE/EXIT FLASHES
UNPUG FOR 2 MINUTES
TURN ON
ENGLISH OK
AUTO SCAN TAKES 5/10 MINUTES
PRESS EXIT X3
MENU 1570
EMU ON OK
EXIT X 3
HOPE THIS HELPS ANYBODY

 

Just wondering who or what "Sunrise" is? A power user with a hate for NTHell of what?

 

Without Sunrise you would be looking at an encrypted blank screen and the clone owner's would have had silver doorstops a long time ago, hope this satisfies your curiosity.