lol no i am human juz i been waitin for some help.. my friend who normally sorts it out for me has gone on holiday.. the key data on 00 = AB 1E 05 EB C6 65 46 77 the key data on 01 = 51 6d 0f 08 41 bb dd d8 neither of them work
Catchkid I feel like a machine lov3ly The codes you posted have one key wrong in it. The telepest codes should read: 00: AB 1E 05 EB C6 65 46 77 01: 51 6D 0F 08 41 BB D5 D8 Where you have dd on 01 key it should be d5.
Press menu, type 1570 on remote, make sure key emu is on at the bottom of this screen. Then exit all the way out.
the EMU is on ... the channels are sayin data is being updated..with the percentage on it.. but nothing is happening is keeps refreshin to data is being updated..
Sounds like there is work going on in your area and it will come back. Do you have a decoder from telepest also and is this working? Please use this link if you are experiencing problems with your connection in the UK on the VM network. This shows a constantly updated list of all VM areas throughout the UK that are down due to faults or upgrades. http://status-cable.virginmedia.com/vmstatus/summary.do
OK how long is it down and when you changed your codes did you press OK to store them. Also press menu and system info and tell me what it says.
itz been down for a few dayz or so but for a while.. been waitin for my friend to come bk to fix it for me but i found this site and decided to see if sum1 like ur kind self can help me lol.. i did press ok and stored the key data .. the sym info read as follows : API : 2.57e_E BOOT VER : 7.0 16 AUG 2006
You could update it as you have old firmware on it. But you will need a null modem cable to start with that plugs from your pc to the Starview. I have all you need here after that. One question though have you made sure that the coax cable is plugged into the cable in connection on the back of the Starview and not the Ant in port.
WHA DO I DO TO UPDATE IT.. ?? IM CONFUSED! the cable wire is in the correct place normally my friend changes the key data and it works straight away.. hmmmm i wonder..
OK lets stay away from updating then. Right you are in a telepest area just do this one more time please.Press menu, type 1570 on remote,you will then enter the CAS screen. Press nagravision note the key data for both key00 and key01, to alternate between key00 and key01 use the < > on the remote. Tell me what it says please. Then press menu type 1570 and see if the key emu is still on. I need to double check both these items.
soz 4 da long reply .. had to pick my lil one up from school..lol anywayz yes the emu is still on .. the key data read as follow : 00 = A1 1E 05 EB C6 65 46 77 01 = 5B 6D 0F 08 41 BB D5 D8
You need to change the b in 01 to 1 as I have indicated above and press OK to store. Then exit out all the way to view channels.
Press menu, type 1570 on remote,you will then enter the CAS screen. Press nagravision note the key data for both key00 and key01, to alternate between key00 and key01 use the < > on the remote. Tell me what it says please.
lolz .. well it workz now so itz all gd.. so if the box goes down again do i juz check them numbers as the same ones i hav now??
Depends as they change sometimes just drop back here as we usually have them within a few minutes of them changing.
