Starview the box help please

Are you sure you are N** and you are from the London area.

 

click on my name and choose the' main starview thread' on the left.
all info and tutorials are there and should sort u out.
feel free to ask if your still stuck m8 ...

 

ola Scouser m8 . back for the late shift for a while !

 

im in surrey epsom

 

OK if you are sure you are on N**, input these keys manually.

LATEST CODES
NTL UK:
00: 3d 2b df aa 51 c8 dd a0
01: E2 C9 74 0A 04 22 A6 12

A visual guide for inputting keys can be found at the Starview Info Dobby2oon link at the bottom of my post. Click the link then click keys this will show you how to do it.

 

hi everyone have an rs232 cable but both it and my computer are female connections. is there an adaptor you can get?

 

i have done al most everything i have scan about more 20 times still i didnt get sky sp1 n movie channels

 

You need to use a USB adapter in conjunction with the null modem cable.

USB Adapter Cable http://www.maplin.co.uk/module.aspx?ModuleNo=29968&DOY=17m6&tabs=n

This is only for reference and can be got much cheaper on fleabay.

 

excellent ill try that thanks! also do you know how to get the nagravision menu to access " key emu"? i cant find this menu and the 1570, 1560 and 2004 codes from the first starview box doesnt work.

 

I think your problem is you are unsure what your provider is. Best bet is to scan all providers, N**, Ex C**, etc. Input all the correct codes for each provider which are here http://forums.afterdawn.com/thread_view.cfm/531363.

May be worth a try. At the bottom of my post in the link mark Starview Info Dobby2oon, click the link, then click key, this will show you a visual guide for inputting keys. As said input keys for all providers and scan all providers.

 

It is the first Starview you have? Press menu, then system info and tell me what it says.

 

its the new starview "the box" that i have. it is scanning and finding all the channels in but i cant get into the menu to put the codes in.

 

i have the first starview also but never had any problems with it. on starview 2 "the box" i cannot get into codes menu or nagravision menu to change "key emu" to on.

 

Thats because you need to flash it to the latest firmware, reason I asked you to give me the system info as you probably have version 2.61 on "The Box". This will not allow you into the nagra screen.

 

ok thanks for your help i'll try load the firmware. i'll let you know how i get on!

 

If you tell me if you are from the UK or Ireland I will give you all you need.

 

how can i unsure my provider because i used get invoice from ntl coz i had broadband,,, i have update the code i check that code as welll...

 

Reason I have offered my advice is you say you are N** yet you get no channels on N** but do on Tele****.

You also said you scanned 20 times so I said it was worth a try using my advise. Really its up to you.

 

Hiya Scouser im in dublin any advice you can give would be much appreciated!

 

Fatpuss you have had scousers advice and here is mine so we will leave the rest up to you ok do what is below and you should get sorted ok

1 Go to menu first
2.factory settings,password code 1668,press ok for it to delete the channels
3.Then turn your box off and wait a moment then turn back on again
4.pick your language,english then press ok.
5 go to installation,cable network check your provider,automatic scan.
6 once its done scanning,press exit exit twice from here
7.now your in the main menu,,press 1570 on remote pad.
8.now your in the cas menu,press the down tab once,to go to emu and turn it on,exit three times to get back to screen and view channels