starview the box stuck

Joseph, if it's finding about 170 channels when it searches what happens when you go to them? Is it telling you that it is a scrambled or bad channel or no signal?

 

If you go into menu down to system info that will tell you what you have on box if you have api ver : 8.02, try 8.04 from eamos library as this was brought out 24/12/08 to sort boxes that were having a lazy update or the update staying at 0%,might help

 

I'll leave it to you Anto. I'm sure you'll get him sorted.

 

When i turn EMU on, come out of menu and go to S*y 2 ... it says 'Data is being downloaded 0%' then goes up to 240% and keeps repeating itself !!
I've also tried S*Y Sports, Indie .. same result.

joe.

 

If 8.02 is the FW try 8.04 it might help, on my box super 8.02 worked no probs but for others it did'nt and 8.04 worked for them
Have to go out now for an hour or so will check back and see if your sorted

 

lads I had the same problem on friday would start to update somtimes reach 140% or less and just when you thought u had it back to 0% and wouldn't move, what u need to do is go through every channel one by one and get a strong one that the update will kick in and pray, its trial and error I got it 2 work on discovery but only after 2 hours of trying every other channel. MCFC999

 

lads.... i changed the standard 4 digit code on my starview and cant remember the code.... any ideas how i can break or reset it? i need it to get into the menu to input the latest codes etc.... cheers

 

1668

 

1668 is the 4 digit for everything apart from Cas System, you need 1570 for that okay.

 

Anto / Evastar / All,

Still no joy.
FYI, when I look at system info is says following:

The Box Super
API Ver: 7.05 e_E
Boot ver: 8.0
10 Apr 2008

Is this info any help ?

Brgds,
Joe 90.

 

As per anto's post at top of page, you need 8.02 or 8.04. You have 8.00, so that will never autoroll.

You need to reflash the box with the correct firmware from eamo's library.

 

hi guys,
i flashed a clone and was waiting on my new remote from flea bay, it arrived today but i cannot get the secret menu up, API ver 2.57-E,
Boot ver 7.0, 16.Aug.2006. is this the right flash or has it not taken? is this why i cant get the secret menu to play with the emu setting?
thanks,
wheelo

 

Is there only one E, or is it e_E?

 

sorry malci,
slip of the finger e-E
wheelo

 

Well it has flashed, have you tried going in via Parental Control.

 

ther is a pin code 0000 as standard, is this where i open parental control then enter 2004, if so i have tried , if this is not what you meant, then help please
wheelo

 

No, just Press Menu and then Highlight Parental Control and Press OK, enter 2004 and then press the INFO button and enter 2004 again and it should open. Just remember that the numbers will not appear.

 

flippin genius,
now the setting i should be emu...on, it was already on, i have heard about the default keyso i will try that,, bingo, now i just have to go to a channel and wait for the "data is being updated" to go to 100%, i should just try each channel in turn until it gets there?
thanks
wheelo

 

Very Good, hope you get up and running, try Disc Turbo or Sly 2.

 

one last question, please malci,
i got bored(tired really) half way through, i have just discovered how to input the c*des manually, would that defeat the purpose of having autoroll feature? this is my first one of these S/V boxes and i know that on my replay if i wanted to know if it had flashed right, then i would put in a bad c*de and let it sort it all out.
thanks for your patience.
wheelo