starview the box stuck

Yes the bad flash method definately works, so keep trying, it could take a hell of a lot of attempts 20 to 25.

When you get it back and running there is a gude in there telling tou how to do that manually, if that is what you are referring to.

 

i have tryed all the bad flash methods but cant get my sv 1 to re start is there any other methods

 

Nope, not if you have had a bad flash, which it seems that you have with only the -- on the front, so just keep trying.

 

also cant find the 4.51 bin file

 

hi guys some serious help is needed!
i have starview 25x7 with API ver:3.00e_E //Boot ver:7.0//27may2007.
up until now i was manually putting codes in sometime it would run for mnths now its hours! but there have been no codes around for days now, is there any software i could load on it to roll over it self? please help losing all my hair.

 

no not at the moment,keep checking in HEREas there may be a new update soon.

 

down load keymaster and you will get all codes very quickly

 

thanks for replying back
i have that. i meant on the star view box?

 

i flashed to 8.02 all worked fine for a few days then nothing cant get any channels except the normal 5 wondering can i still flash to 4.55 any help please and much appreciated

 

have tried to flash starview the box keeps saying flash failed any ideas

 

keymaster not been updated since 04/12 so manually inputing codes doesnt work at the moment well at least not for me

 

Yes you can flash over that firmware straight to the 4.55, but it is starview 2 The Box that you are talking about isn't it 9It has The Box on the top left hand corner looking from front). NOT starview 1, as you will brick it with any the wrong formware!!!

 

yes it is starview 2 the box thanx for your help

 

Your welcome, but remember you must use the GTRom 4.03, with App File Only box checked to load the 4.55.bin.

 

thanx alot malci for all youre help

 

Your welcome, take your time and you will get it done fine, you will have to do a fresh Installation when you have got it flashed, don't forget to turn the Key Emu back ON.

 

does this mean that the so called fix 8.02 was no good after all and 4.55 is fine thanx once again for your help its much appreciated

 

Well put it this way it has been replaced in the Library by this firmware The Box 4.55.rar dated December 08 . And it is your only way forward if you are getting no joy with the 8.02.

 

ok thanks once again for your time and effort to help me out some of the other forums i tried it was like banging my head against a brickwall to get any answers much appreciated thanx

 

Not a problem, hope you get sorted quickly, good luck scotty - matey