STARVIEW UPDATING FIRMWARE - NO CODE BEGGING HERE

direct feed, i'm in the UK if that has any bearing

 

I know you are in the UK All I can say is do a factory reset again. But this time after factory reset, turn off the SV at the back switch for a minute and then back on. Turn key emu back on and scan again.

 

Am i right in thinking that the codes in the Nagravision should have changed once the firmware was downloaded? Is that a naff question?

 

C**es would change back to default after a factory reset. BTW we cannot discuss c**es here in any post

 

I live in dublin and N** are my providers. However, in Nagrivision I have lost the option to select N**. Can anyone help please? Also if anyone has the latest codes I would appreciate it. Thanks

 

No code posting allowed. Please read the forum rules before posting.

 

rang the changes u suggested regards switch off & re-scan etc... to no avail. Any more help available my Scouse friend.

 

Hi guys and girls

Just installed cryptstar v 1.4 on a genuine starview box but i have sky so cannot test it. will that still work in dublin?

 

yeah, thats the correct firmw@re for a genuine SV1, & it will work in Dublin.

 

I have starview 2 the box and all of a sudden all my channels are bad or scrambled except Irish stations. Does this mean I need new firmware

 

What part of the UK are you in?

 

Menu 1570 turn your emu back on and exit

 

Central belt of Scotland

 

1 make sure your incoming cable is connected to the cable input on the box and not going thru a splitter

2 Make sure you have a scart lead connected to the tv on the box and connected to AV1 or EXT1 only
also make sure you check this as been a proper working scart

3 Next go to menu factory settings and press ok put in 0000 code press ok to clear all data

4 Make sure you turn the box off at the mains for 1 min and turn back on again

5 Accept the language

6 Installation put your provider in the top box then do an auto scan wait for this to finish even if you see
failed a few times this is normal so just be patient till it has finished

7 When this is finished exit out to main tv screen

8 Then go to menu and press 1570 on the key pad into secret menu and turn the EMU on which has been switched off by default

9 Exit out 3 times to main screen and put the box on to the tv channel sky sports 1 and wait for this to update this
could go up as far as 250% so again be patient and wait also do not change the channel while
this is been done or you will have to start all over again

 

data is being update occurs up to 100% for the majority of times b4 the Channel title flashes up for a second then reverts to the info panel about data being updated. about every 5th time it will get as far as 130% and then the Sky Sports 1 panel comes up for about 1 second

 

ok back into menu 1570 and hit the set default key and exit out and see will that work

 

U guys are genius. Big thanks to u Fergus & u Scouser

 

Hi people,

has anyone used the new firmware for the the box super 8.0, has this rectified the re-booting?

would like to know before downloading the firmware, cheers ;-)

 

No it has`nt rectified the rebooting issue. you`d be better off sticking with the firmw@re you already have until its sorted.
keep an eye on the forum for any updates.

 

o.k thanks for that, and just to clarify that this is defo a firmware issue and not a hardware issue?

cheers again ;-)