STARVIEW UPDATING FIRMWARE - NO CODE BEGGING HERE

guys

whats the difference between 705e & 8.00e? im on Ch****, im not having any problem with the box other day sometime one or two of the channels i have 2 re-scan

 

Hoping someone can help

I have a starview 1, im trying to load the software CryptStar-v1[1].4-Core400 using GTRom Loader v4.0 the STB model is set automatically at GCR 3510. I have everything connected fine the box on stanyby (just displaying the time) and for some reason it will download. the Download % stays at 0 and nothing happens

Any ideas?

Cheers
KP

 

check your com ports

 

Thanks for that Checked Ports you where right i had port 3 and my Pc said port 4 changed it on GTRom Loader now im getting "Flash Update Fail" not sure what the problem is.

 

Please can anyone HELP!!! I have a starv**w 2 the box and I have connected my box to my pc and downloaded the GTROM Loader software and downloaded the Bin File made sure the both are on com1 and the Baud Rate is 115200 then load the bin file make sure the file type is App File Only but when i press the download button the download bar comes up but stay at 0% and then says Flash Update Failed PLEASE PLEASE HELP ME

 

Where are you?

 

Not sure about a high street shop.. But iwantabox.com sell them on line. Hope this helps

 

it sounds like its not detecting the box or the cable, go to your start menu, right click on computer, then select manage, click on device manager and go to ports (COM&LPT), right click on the cable you installed with the driver software (which i hope youve done already) and go to properties, click on port settings then on advanced and assign your cable to com 1, 2, 3 or 4. you may have to do a restart but sometimes it works without it.

 

Celtic71 can you answer my qusetion please

thanks

 

happened to everyone alan, i presume your talking about c4 amongst others

 

hi axxxo

I was just wondering what the difference was between 705e & 8.00e? witch one i should use if i need to, im on Ch****, i have 6.01e on my SV3

 

could someone help me please my remote off my starview just stop working this morning how can i get a new one

 

The remote might be ok, try this to see.
If you have a camera phone, put it on camera mode, point the remote at the camera & press a few buttons. If the remote is working you should see the infa red LED flashing on the screen, if not then the remote is dead.

 

you know what they say alan, if it aint broke don't fix it, v8.oo is released with the newer box super models or was anyway. sorry about the slight delay in reply (night shift=sleep!)
how many channels are you getting in by the way?

 

the next thing id check id the null modem cable the right one

 

Hi Im having the same problem, i changed the setting as request but still nothing! I have installed the driver and flashed a lot of other boxes with no problems.

Im using GTRom Loader 4.0 and the bin file is the 257 as im not sure if its a clone or not so been extra safe. Not sure what else i can do any help would be greatly appriciated.

Cheers

KP

 

are you using the usb adaptor?you should see prolific usb to serial comm port in ports in the device manager,this will be the cable you are using if its detected, try uninstalling, restart and reinstall, if your on vista it may take a few tries, took me a couple of times.if your not using the usb adaptor and just the serial cable it may be the wrong one

 

have you flashed a box before with the cable your using niow?

 

Thanks to both of u for getting back so quick, im using the USB adapter and im on Vista. Iv flashed Eurovoxs before not Starviews, i flashed my Eurovox again today to check it wasnt the cable and it worked fine. Could it be a problem with the box itsself?

Cheers KP

 

so tell me step by step what you done so far so we can try identify the prob