STARVIEW UPDATING FIRMWARE - NO CODE BEGGING HERE

also tell us if its a starview original or starview the box, box super etc..

 

ITs a Starview 1 almost sure its a original not a clone flashing with 257 to be sure (have also tried genuine only)

I start by pluging the box in to the socket and PC and place on stanby (time showing on front) I open GTRomv4.00 it asks me do i want to run, press run then vista asks me do i want to allow the software to run i press "Allow"

I set the Serial Port to Port 1 (same as in device manager properties) Baud Rate is 115200 STB Model GCR 3510. I press Bin File and select the 257 file, Have file type as App File Only.

I press Download, the percentage sceen stays at 0% and then flashing failed and box turns its self on to the channel number display.

 

i would try changing the com port to 2 3 or 4 in device manager, leave the gtrom loader alone, dont change a thing on it and see if that works, if its done eurovox before it should work before long

 

hi i hope this isnt in the wrong place...

i have "the box" not a clone 4.54e

all the channels are black, bad or scrambled (apart from bbc & itv)

am i rite in thinking that simply in-putting new codes wont work?!

do i now need to update/flash my box? (as desrcibed on the first page of this thread?)

thanks

 

no it shoul update itself, make sure all your cables are in the right place also make sure key emu is switched on menu 1570 key emu on, also what is your area and provider

 

Still not working going to keep trying. Is there any other way to flash without GTRom Loader?

 

not that i know of, where did you download the gtrom and firmware from, try deleting it and download it again from the link in my signature below, rule out the possibility of a corrupt file at least.

 

Still not working going to keep trying. Is there any other way to flash without GTRom Loader?



you need the rom loadr try a new file and see if that is ok and you never answerd me when i asked you if you used the null cable all ready or is it a new one?

 

by the way, very important, here's how to identify a clone
http://www.freewebs.com/svclones/
also the cryptview file for clones could kill a starview original so make sure you know what you have
link for gtrom
http://www.4shared.com/account/file/39363235/94f9b87/GTRom_v400.html
link for clone firmware
http://www.4shared.com/account/file/44560665/dccfe334/CryptStar-v14-Core257.html
link for genuine
http://www.4shared.com/account/file/46699827/b260d1ca/CryptStar-v14-Core400.html

 

got a problem i tryed re flashing my sv but now it only has a single green dash tryed the bad flash stuff celtic says at the begining of his thread but nothing any ideas

 

O sorry tought i did, i used it before to flash eurovoxs, i reflashed my eurovox today to be sure and it worked fine. I redownloaded the file 257 and the genuine 1 as well as the rom loader from the link on this page. Still have same problem, i tried even uploading a channel file and that failed 2.

 

axxxo the cryptview file for clones is safe for both gen, 1st gen, and clones

 

keep trying peter, it does work, might take a few tries

 

ok moggser, missed where that was told though, i always read that it was unsafe, better to be safe than sorry though?

 

w


only thing is the com ports go over it again and change them if ness
i know vista does give probs with this

 

don get me wrong wasn havin a go at ya and your right better to be safe then sorry its if your very un sure what box you got put the core 257 on

 

no worries mate didnt pick you up wrong, im no expert id be the first to admit!

 

either am i lmao
besides your only a expert if your getting paid

 

Both of u thanks very much for all your help dont think there is much more i can do, going to keep trying swaping ports etc if it doesnt work it doesnt work, have a feeling it might be the box Anyways thanks to both of u for all the help

 

does the box turn on ??? i.e does it work?