Starview usb 4 Fix (we're all doomed, doomed i say)

hi hooter

this is what i done:
downloaded the file "all channel for box ubs data.bin" onto ubs
upload this file into the box....reboot itself
done a factory rest
ran a auto scan
turn on emu key and set dafault key
check the channels again.....not there.

do i have to upload some special file?

incase u need to know the system version of the box:

model id:c500
s/w version: 1.10
boot version: b-11
date 5 june 2009.

 

hooter if your there can u check your file links the beta files listed are 512kb all channels for box usb data. bin. and the new one 919kb box super usb beta new. bin
wondering if that is why some people are not getting all channels back.

 

that is just the data file of my own box, i have the 912kb one there i only tell people to d.load the data 1 if they are still missing some chanells after they put the bin file on, check it out
http://www.4shared.com/dir/17021639/1d7b8d51/sharing.html
ive noticed the adult and 1 or 2 others dont come in when i flash a box or 2 on on the beta one, even after a manual or automatic scan, unless you put the frequency codes in on manual scan
thats when i give all chanells 1 out to people otherwise they get this http://www.4shared.com/file/115428238/5f9bad6c/TheboxSuperUSB_BETA__new.html

 

roy try delete all your channels first and then do a factory reset and try it again, in a bit of a rush be back in 45 min

 

guys - is anyone having trouble with the aspect ratio ? i have it set to 4:3 and full. Some channels display distorted. Was using SV3 before and had no issue with this ... is it the box or the file ? using beta new new file. have tried 4:3 with letter, 16:9 with center and full but cant get some channels looking right. viewing on a 20 inch beko lcd tv.

any thoughts ?

 

It's never really been right. I find I end up playing with the TV rather than the box and that way I can get it looking okay. Bit annoying.

 

try the output settings
try it in cvbs then rgb then pal&ntsc some work better with different tv's, eg:cvbs on pal, cvbs on ntsc, then try ntsc on cvbs ntsc on pal try it while watching a football match and you will see which 1 is best output for your tv hope that helps.

 

Don't those settings alter the colour/appearance rather than the aspect ratio?

 

yes on appearance, a little bit on colour ps: on another post you were talking about the box usb recording does yours mine does i sent youi a reply to it get back to me about it

 

hi hooter...no good!
i give up :{

 

did you get my private message do what i said in it now

 

roy if bbc1 is still missing somehow you are putting the version 110 file on it do 1 more factory reset and put this file on 1 more time
http://www.4shared.com/file/115428238/5f9bad6c/TheboxSuperUSB_BETA__new.html
then press ok and you know the rest

 

it works!!!!
yippee

now next thing...now do i record stuff onto harddrive? do i need to download any software? is there a thread already exist?

 

as far as i know u will not see n2 data u will see numbers but they dont work that way now.

 

all i can say to you is
and yes to your harddrive just press record on your remote you might b asked to format it, if it says that save anything you have important to your computer
then format it on your box if it asks, if it does not record get back to me and ill help.
ps:what was it that was wrong with your box or what did you do this time that you ware'nt all the other times

 

I never got round to putting v110 on
But got fed up of the box freezing when on standby so, updated on Saturday

Did the usual stuff and the box with new firmware was up and running within 10mins

 

Thats the idea of them releasing new files, to fix the bugs, if you dont use it whats the point in them releasing the software.

 

When did I say I never use it?!

I was quite happy just to turn the box off and back on and all the channels were available

I've always held off putting the latest firmware on boxes. If my box is working pretty much okay and I receive all the channels then should I really be jumping to install the latest s/w

 

There is always a reason behind a firmware release,to get optimum performance from anything, you need to update it, your box is just one of them things, they could be aware of something that you would not normally be aware of. And i never said you said you never used it, what i am saying is people see new releases and wait until there box goes off, or there is something wrong with it and wonder why, that is the reason why the updates are done most of the time, to prevent things.