Starview usb 4 Fix (we're all doomed, doomed i say)

did you follow the tutorial? Did you factory re-set after flashing the box? Are you scanning from a direct feed (no splitter on the cable, direct into the box)

 

sorry mickah for jumping in here, learchus do what MICKAH said if you are still missing channels do what i told farhic7 to do 6 posts above.

 

Downloaded hooters file and can see it in USB menu but when I highlight and press OK nothing happens.. Is there something else I should be doing here ??

 

Thanks mickah and hooter for the help so far.
Its an nt* cable and no splitter at all.
Ive looked at the box and i cant see a silver heatsink so i assume its not a clone box.
Well i downloaded that usb file you gave a link to but its not a bin file,so when you press ok on it, nothing happens,is there another way to install it?

 

Learchus,
Change the name of the file to:-
ALL CHANELLS FOR BOX USB DATA file only.bin
The .bin extension is essential or it will not load.

 

sorry learchus&DEFIE it was just a case of renaming the file, try d.loading it now and it should come in as a bin file

 

sorry farhic7 did'nt mean to jump in on your answer, you just posted while i was typing nice 1 for helping them,
just for the record ive already renamed the file
thanks.

 

hey hooter,
well thanks for renaming the file and i installed it and got a few more channels like some of the movies and news but still no sk*,bb* or rt*.
Do i just follow the same tutorial and use the all channels file instead?
Thanks for all the help so far.

 

Thanks hooter..still no joy for me..Should have said I am on Waterford network not Dublin.. Loaded channel file and lost them all. Have rescanned and got most channels back. Still missing some as before though.. Any ideas ??

 

no make sure you have the beta file on first then put the file i gave you on your memory stick knock off the box put the memory stick in turn box on, go to usb and just d.loaded the file i gave you (restore data it will ask press ok and let it flash) then press menu 1570 make sure keycode is on and press set default key then exit and turn ox off if you are taken usb stick out.

 

provider n*l..I am using the latest firmware. loaded your file and all channels appeared on list but just black screen when selected. Did factory resaet and rescan and got most back but still missing some. Did as you said with 1570 and the default key. re-scanned again and search stalled at 75%

 

just finished rescan after setting the default key. back with most channels but still a small number missing

thanks for your help so far..

 

when all the channels appeared black you did not have to rescan just press menu 1570 turn keycode on and press set default key and exit
what have you got on now.

 

defie,

This is a list of the frequencies used by N*L in Dublin. Maybe there are some variations for Waterford.
If you can identify the other frequencies you can do a Manual Scan to find the missing channels.
Check with someone who has a working box in your area if you can.
Otherwise can anyone in waterford provide the info?

SV4 - TP List

No. Freq.
1. 150000kHz
2. 291000kHz
3. 299000kHz
4. 307000kHz
5. 315000kHz
6. 323000kHz
7. 339500kHz
8. 347500kHz
9. 355500kHz
10 363500kHz
11 371500kHz
12 402000kHz
13 418250kHz

 

maybe i wasnt clear..sorry

Factory reset..Loaded your channel file. Turned on key. set default key and all channels still black.

Performed factory reset again. Rescanned . Turnd on key. set default key. Back where i started. most channels some missing.

This is where I am now. Did try a rescan after setting the default key but it made no differece to the channels found

Hope the above makes sense and thanks again

 

ok from the beginning do this
do a factory reset flash the beta on, scan in for channels on manual scan, this is how it should look
150000
6887
64
enabled
wait for it to stop
press menu 1570 keycode on, set default key,
then flash this file if you are still missing channels
http://www.4shared.com/file/114093272/46157ec4/ALL_CHANELLS_FOR_BOX_USB_DATA_file_only.html
when done press menu 1570 turn keycode on and pressset default key.

 

did all you asked. when i manually scanned still missing Loaded your file. Turned on key and default ket set..All channels now blank

Did factory reset again. performed manual scan turned on key and default key set.

Manual scan finds 140 channels

most of them back up now. Still missing a couple of the adult ones but I can probably survive without these

 

now add this file,
http://www.4shared.com/file/114093272/46157ec4/ALL_CHANELLS_FOR_BOX_USB_DATA_file_only.html
and put that on and you will get the adult and the other 10 channels you are missing, if all the channells go black just turn keycode on
no need to rescan or factory default.

 

Link not valid.. says it is outdated can you repost