still not sorted any advice....

hi to everyone still havenin probs really doing my head in now..i connected my eurovox to the same box to do a channel data download and all it was still waiting for response or somet like that left it on for 15mins should it of downloaded straight away just,i just unpluged it as i was,nt sure it was doing anything left it on standy as it stated any help yet again very gratefull...

 

Have you tried a Deep scan? factory default then Menu, installation, Deep scan, pull along until it shows 6887 then ok to scan.

 

thanks hi teck dont think eurovox 07 has deep scan think its just power scan yeah i pluged in the rs232 cable to both boxes that are the same,but when i did that with my,n it downloaded the software even though its not an 07 model its really stumpen me now thanks for helping me out..

 

Apologies but I don't understand your reply? your right the red doesn't have the deep scan option, my mistake Ive slept since

Did you upload the CDF from your working box to your PC then download it to your problem box as advised the other day.

 

hiya i dont have a usb to do that i have got a teeside channels dated 28.10.08..would that work and how do i do that..cant understand it as it was working fine for 8months after every flash its still the same just coming up 8% before i even start ive even tried putting the frequencies in manually no joy whats the best thing to do as i dont think im going to be able to get it working even though its not broke do you think i should put it on ebay or sumet..also the teeside channel thing i have when i clicked onto it to open nothing showed should all the channels have came up...do you know were i could get a channel list for my area as i dont live anywere close to get a usb adaptor thanks again

 

Please try to answer these questions.

1,I really am struggling with what your saying. At the beginning of this thread you said that you had loaded the latest firmware and it downloaded successfully am I wrong in thinking this.

2, If you have loaded the firmware to your box via a cable then you should be able to upload and download your CDF but you then go on to say that you don't have a "usb" to do this? how did you flash your box if you didn't have a usb adaptor, did you just use a Null modem cable? if yes then you can still download upload the CDF from your box.

Your also asking me how to load the CDF, Did you read through the guide I gave you on how to do it? if I was to tell you how to do it I would only be repeating whats in that very guide.

Click on this blue writing at the side of this arrow > http://www.4shared.com/file/74105316/a1cca6c5/Upload_and_download_CDF_instructions_for_eurovox.html

That will take you to a page which says download. Click on the download and wait for it to count down 10 seconds, it will then say click here to download so as as it says and click on it. Save it to your pc and follow the instructions and it will work providing you have the correct cables.

 

really sorry for the confusion...i downloaded the firmware with a cable that came with the box rs232 cable thats what i used to do the update of firmware...i then tried to put the channel data from my box thats working using the same cable rs232 i plugged it in the back of the box then i plugged other bit in the computer but nothing appeard,i thought you said you needed a usb adaptor to put my channel data from the box thats working onto my computer,i didnt relize,so just to recap can i use this cable to do this the grey rs232 cable to put my channel data onto my computer i will read through that link you have sent me thanks

 

If you have a null modem cable,



and a socket at the back of your PC like this,



Then that is all you need. Have a look at the guide and come back if your still struggling.

 

hiya yeah my cables are like that..thats how i flashed my box with those,like it said in your guide,i used the same cables to plug the box that is working into my computer rs232 cables one in the box one in the computer but nothing came up..also i have a ntl channel data before i updated i pressed edit and another thing came up i pressed channel list and nothing was there so thats why it might not of worked if its showing no channel list..also if those cables are ok to use on my working box to the computer how do get my channel list up after that is there something you click on the computer to show this..thanks

 

A CDF isn't just a list of channels and frequencies, once loaded to your box you will not need to power-scan nor manually input the frequencies as the channels will already be organized on your box.

when you plug your box into your PC via a null modem cable "nothing will come up" if plugging a USB adapter in as said before yes it may make a connection noise or show found new hardware etc etc.

Download and save this to your desktop >> http://www.4shared.com/file/44971057/ef7f23c7/UFL_Max_RED_21_04_08.html

This is only for the CDF purposes as some poeple are having problems loading the CDF with the new firmware loaders. This is no good for updating your firmware on your box as it is the old version from april

Once opened it will look like this,



NOW PLEASE TAKE NOTICE!.

To upload your CDF from your good working box.

1, With your box on standby Plug it into your PC using the Null Modem Cable.

2, Look at the picture above of the loader, Press the BROWSE button. It will then ask you where you want to save the CDF and it will also ask you to name it which means you will have to fill in the white box with whatever name you like so that you can recognize it later i.e "MY CDF" will do fine.

3, Click SAVE. It will then search for your box and upload the CDF, should take around 5 seconds.


#########################################################################################



Now to download the CDF back to the NON working box.

1, With your Box plugged in on standby, on the Firmware loader above press "BROWSE" as before.

2, Now select the CDF that you saved on your PC from where you saved it to.

3, Hit the BOTTOM DOWNLOAD button and wait for it to send the CDF.

4, Plug your box back up to your TV and it should work, If it doesn't please send it to me and I will take a sledge hammer to it.

 

thank you for that..i had a cdf from teeside so i just used that plugged box back in....do you want the good news or the bad...channels are there but saying no signal...we must be nearly there do you like it how i said we lol...what do you reckon i know the signal is ok so maybe the rfin on the box might be faulty,,or what do you reckon about signal booster bit stumped now really gratefull for all your help..please tell me a fix...

 

I'll be honest, I think it's knackered probably a tuner problem.

If you forget about the CDF you have downloaded and do what I posted on the previous page where by you upload your CDF from the working box and then download that to your problem box as the CDF you have is slightly outdated.(although some channels should work if not most).

Because your OTHER working box is tuned in at your address once its uploaded then downloaded to the problem box if it's not working then I would say then it's FAULTY.

Before downloading the CDF to your box do a factory default.

Best of luck

 

hiya just thought id let you know still no joy think you are right it,s knackerd..one thing i thought was strange when ive tried changing channel over theres a thing on the right hand side it,s like a little dot with to little things round the side of the dot and its never done that before what do you think that could be,even though my signals ok what about signal booster just trying to think of owt else before i through it out the window ...lol...