The Box (Ireland)

Or probably still drinking
I`m off meself for a while, talk to you later steo

 

probably is see ya

 

Tried all them for 1/2 hour but still at 0% ,turned off turned on and finally put codes in manually and only BBCs and Utv Rtes working No Movies!!!!!!!

Whats going on??

 

put it on sky2 and wait. if it's blinking every 5 seconds but on 0% try sky sports2. then vice versa until it starts going. it might update 3 times until it works.

and check that emu is on. if it's scrambled or bad press set default key first.

 

Hi, I have the box aswell and I have downloaded the firmware. When I enter it into the v4.03 application it wont start the download. Help me! I'm slow

Thanks.

 

Hi Ive downloaded the firmware for 'the box 'and i have it on s!y 2 and it keeps going up to 300% and then going back to 0 and going up again, its been like that for over an hour, any ideas? I have three boxes in the house and ive tried it on two of them and they are both the same!

 

Has anyone got the box pvr??

Noelyf or Scouser?

I have flashed it and the channels were fine yesterday. This morning they were gone. I still have a few random ones (sky spots xtra, vh1, rte 1).

Im on n*l in dublin with new firmware (ver3.105, 8.12.08).

I have tried leaving it on the suggested channels (sly 2/ disney/ movies/ sports) but nothing!!

I did the same to my sisters one down the road and it works fine!!!

Any ideas?

 

Hi Ive downloaded the firmware for 'the box 'and i have it on s*y 2 and it keeps going up to 300% and then going back to 0 and going up again, I've left it running all day! I have three boxes in the house and ive tried it on two of them and they are both the same! I have manually entered in the codes but I would prefer to get the boxes working properly with the firmware, anyone outthere that can help?

 

Well if you have (manually entered) why not give it go by pressing Set Fefault key and see if it is going to sort it at the next roll. That's what I would try at the minute.

 

As far as I know there is no solution for the autoroll as yet.

Just put them in manually for the moment.

 

Some of the sv2's need you to do a factory reset and autoscan and then turn emu on and exit to s*y2 and should update.

This is because the channel frequency has changed on some channels and if you have an old channel dump on s*y2 won't work.

 

any fix for the box T's lads or do the codes work the same for it?

 

instead of sitting like a numpty waiting for ages for it to update just go to the menu press ok on the set default key. then turn emu on the exit back to the channel sky 2 etc

 

yeah the codes will work for the box-t.
i got mine working with them
anyone know if they work for digivox-t ??

 

cheers mate will have a go tonight so .. .. great site and will contribute not just here for a quick answer. Thanks go out to the mods have a good x-mas/new year.

 

All the fix's are in Eamo's FTA Library at the bottom of my post for all the MMDS box's, see original post by scOuser, announcing the releases, so just update your box's, see first post.

http://forums.afterdawn.com/thread_view.cfm/732421#4445614

 

Hi Guys

I'm based in dublin, Ireland using NTL. I have the original starview "the box". Just upgraded the firmware and manually input the new op codes & turned on EMU.. I done an automatic channel scan and found all the channels, however when I go to look at them they are just blank - signal strength is good..

Am I missing a step?? Please help, can't live without Sky sports!!

 

Menu > 1570
Go to set default key > press ok
Exit to s*y two & let it update.

 

In eamos library it says 457 soft is the latest for SV-2 but it will not download??

Any clues guyz?

I already put new soft in a starview 1 for a m8 so lead etc. is okay.

Its ok now after 8 attempts and nothing was changed, strange gremlins at work!!!