i am havin a problem. i was burnin movies fine up until a few weeks ago. i thought it might just be new movies that u couldnt burn but i tried to do an old movie and it did the same thing. now what it is doin is it will burn like 4 percent usin xcopy xpress and then finalize leavin i guess u call it a coaster. then i tried to use dvd shrink and at first it said error then said session fixation error. then i tried to simulate a burn and it said somethin about this type of media cannot be used. the funny thing is i burned a movie last night on dvd shrink and it burned but only played on my pc and not my dvd player. now i cant get anything to work and i dont know why out of the blue it is doin this now. also i been usin the same media for 5 months when i got the computer which is a HP with a 300c HP burner and the media i use is verbatim and memorex. appreciate the help thanks in advance
Where exactly is your problem? I'm not understanding your question 100%. Are you only haveing a problem burning the movie? Are you having a problem ripping the movie to your HD? Sounds a lot like media problem? Memorex are one of the worst media out there. Run your blank disks threw Disk Detector available here on AD and tell me what it reads.
i dont know where the disk detector is on here but i am not havin a problem burnin to my hard drive its burnin the movie to a dvd + r. oh yeah and its not memorex they are maxell and verbatim. like i said they worked fine up until just recently i dont know what happened. i was usin dvd x copy xpress pretty much then it started messin up and burnin for 4 percent then finalize before done burnin. then i tried dvd shrink and nero and nero at first did same as xcopy and now it just gives me errors. here is a log from nero i saved if that helps. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 8:37:36 PM Nero Version: 5.5.10.56 (Nero Express) Recorder: <HP DVD Writer 300c> Version: 7H29 - HA 1 TA 0 - 5.5.10.56 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS CD-S480/AH> Version: 0.85 - HA 1 TA 1 - 5.5.10.56 Adapter driver: <atapi> HA 1 Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 300c atapi Port 1 ID 0 DMA: On CdRomPeripheral : ASUS CD-S480/AH atapi Port 1 ID 1 DMA: Off ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523628kB) Free physical memory: 168MB (172508kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: On 29.11.2004 UDF/ISO compilation 4:28:58 PM #1 Phase 112 File dlgbrnst.cpp, Line 1655 DVD-Video files reallocation started 4:28:58 PM #2 Phase 114 File dlgbrnst.cpp, Line 1655 DVD-Video files reallocation completed (no file modified) 4:28:58 PM #3 Text 0 File Isodoc.cpp, Line 7604 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 4:28:58 PM #4 Phase 111 File dlgbrnst.cpp, Line 1655 DVD-Video files sorted 4:28:58 PM #5 Text 0 File Reader.cpp, Line 115 Reader running 4:28:58 PM #6 Text 0 File Writer.cpp, Line 125 Writer HP DVD Writer 300c running 4:28:58 PM #7 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 4:28:58 PM #8 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 4:28:58 PM #9 Text 0 File Burncd.cpp, Line 3773 Turn on Disc-At-Once, using DVD media 4:28:58 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (original item values) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 2145664 (2145664) = #2145664/476:48.64 relocatable, CD pos for caching/writing not required/required, no patch infos -------------------------------------------------------------- 4:28:59 PM #11 Text 0 File DlgWaitCD.cpp, Line 229 Last possible write address on media: 2295103 (510:01.28) Last address to be written: 2145663 (476:48.63) 4:28:59 PM #12 Text 0 File DlgWaitCD.cpp, Line 234 Write in overburning mode: FALSE 4:28:59 PM #13 Text 0 File DlgWaitCD.cpp, Line 1703 Recorder: HP DVD Writer 300c, Media type: DVD+R Disc Manufacturer ID: MCC, Media Type ID: 002, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 0 4:28:59 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 824 Prepare recorder HP DVD Writer 300c for write in cue-sheet-DAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 99659776 4:28:59 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 2145664 (2145664) = #2145664/476:48.64 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2145664 blocks [HP DVD Writer 300c ] -------------------------------------------------------------- 4:28:59 PM #16 Phase 24 File dlgbrnst.cpp, Line 1655 Caching of files started 4:28:59 PM #17 Phase 25 File dlgbrnst.cpp, Line 1655 Caching of files completed 4:28:59 PM #18 Phase 36 File dlgbrnst.cpp, Line 1655 Burn process started at 4x (5,520 KB/s) 4:28:59 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 4:28:59 PM #20 Text 0 File Cdrdrv.cpp, Line 7933 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1 Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 4D 43 43 00 00 00 - 00 00 30 30 32 00 38 23 ..MCC.....002.8# 54 37 13 02 4A 71 02 90 - 66 16 16 0B 0B 0A 0A 01 T7..Jq..f....... 1C 1E 0B 0C 12 12 01 00 - 00 00 00 00 00 00 00 01 ................ 4:28:59 PM #21 Text 0 File DVDPlusRW.cpp, Line 474 Start write address at LBA 0 DVD high compatibility mode: Yes 4:29:31 PM #22 SCSI -1135 File Cdrdrv.cpp, Line 1447 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02A40000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x01 0x0D 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 4:29:31 PM #23 DVDR -1135 File Writer.cpp, Line 333 Write error 4:29:31 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222 all writers idle, stopping conversion 4:29:31 PM #25 Text 0 File ThreadedTransfer.cpp, Line 216 conversion idle, stopping reader 4:29:33 PM #26 Phase 127 File dlgbrnst.cpp, Line 1655 Generating DVD high compatibility borders 4:29:52 PM #27 SCSI -1135 File Cdrdrv.cpp, Line 1243 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 4:29:52 PM #28 Phase 129 File dlgbrnst.cpp, Line 1655 Generating DVD borders completed successfully 4:29:52 PM #29 Phase 38 File dlgbrnst.cpp, Line 1655 Burn process failed at 4x (5,520 KB/s) 4:29:52 PM #30 Text 0 File Scsicmd.cpp, Line 406 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.51a, size=17136 bytes, created 5/2/2003 11:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) thanks
I remember having a similar problem, I have to unselect the [start new mutisession disc] and select [no mutisession disc] and check finalize disc. After that everything burn completely. however this will not work for you since you already select no mutisession. the only other things i could suggest is to reinstalling the burn program if that fail. try reinstalling or repairing you OS.
THE ANSWER I had the same problem, it's the cd's or dvd's not a hardware OR SOFTWARE that is the problem. My problem was with princo DVD-R a bad batch it there manufacturing. Get new disks and try again (with different batch number).
