Tutorial - Make Your Nintendo Wifi USB Connector A SoftAP

hi, i need help. so basically i installed the new software for the wifi connector, minus the nintendo software. this is what i did:
lug your Nintendo Wifi USB Connector into your computer.
go into your control panel.
go in add hardware.
pick next.
pick yes i have connected the hardware.
pick add new hardware device.
pick install the hardware that i manually select.
pick network adapters.
on the left, pick buffalo INC.
then on the right, pick BUFFALO WLI-U2-KG54-YB Wireless LAN Adapter
pick next.
a message should pop up. pick continue anyway. and it should install


After that, i go to start / all programs / wlan card / control center
and I always get a message, UNABLE TO CONNECT TO THE WIRELESS LAN CARD. THE TRAY ICON WILL BE LOADED ONCE THE CARD IS INSERTED.

I've been trying this for a week and nothing is happening. I even check in the decice manager and it says the wifi is working properly. of course it's plugged in. any ideas? thanks for your help

 

Let me think about this for a bit.

 

I thinking you've missed overwriting one of the driver files and may want to go back and start again making sure to overwrite the files. You say the card is enabled so I think the wifi driver is missing...
Is the connector flashing?
WD.

 

Hi there, i got a problem with the nintendo usb connector. i tried to make it a softap, but for some reason i had to reboot the pc(i was at step 6) then when i pc finished opening it would keep rebooting, like windows ask my password to log in, then i see my desktop, then the pc reboots. it tried a few times but it always did that. later i figured that it was the connected nintendo usb connector that did that, so i unpluged it, open the pc again, then plug it, then it reboot again. so i decided to uninstall the asus drivers and sh*ts, but it still reboots, when i plug the connecter, plz someone help me heh

 

in the tutorial it says not to reboot the computer.

 

yea i wished i had not rebooted now, buttttttt, i reinstalled the asus drivers and it stopped rebooting all the time.
now thw problem is that when i want to UN-tick the ICS box in the softap setting i can't
someone seem to have had the same problem and couldn't resolved it, i guess i'ill dig around a little

 

Here's the whole Error Message.

Your Internet connection (with disabled Internet Connection Sharing) and home network may be Bridged with BUFFALO WLI-U2-KG54-YB Wireless LAN Adapter. However. "Connexion Large bande (WAN-Miniport (PPPOE))" can not be bridged.
Only Local Area Network (LAN) connections may be bridged. For example, "Connexion au réseau local(Carte réseau FastEthernet PCI Realtek RTL8139 Family" and "Connexion réseau sans fil (BUFFALO WLI-U2-KG54-YB Wireless LAN Adapter)"may be bridged.
Please change your settings before applying the network bridge function.

 

I have done everything so far, but the part where you go to Start>Programs>ASUS Utility>WLAN Card>ASUS WLAN Control Center.

When I try to open that, I get the following error:
"The application failed to initialize properly (0xc00000005). Click OK to terminate the application"

I really hope there is a solution..

 

Have you made sure you overwrote the other files?
Go back to the start and make sure when you patch the driver's you write over the other ones.
Let me know if this works and I'll send you the rest of the setup
WD.

 

Hey guys, thanks for all your help, especially that 2nd video. It was great! I guess I just needed to individually all the new drivers to the ASUS. Seems to work well, now. Thanks again.

 

Any time, and your welcome...

Cheers WD.

 

Hey I downloaded the file but it came up as a file needing a program not a folder, can you please help me?

 

You need a program called " Winrar " to open the compressed file. Just google winrar or click on it and you will find a free copy. Any more ?'s just post and we'll help you...

WD.

 

after i browse for drivers and click continue installation it requests a file from the CD the product came with, what do i do?

 

if you've installed the nintendo software you have to remove this and all files first before the custom drivers can be installed

 

i know i deleted the registration tool from add/remove programs but there r more somewhere and i can't find them, like drivers how do i delete those?

 

Go to start/search and search for any nintendo files then delete them and reboot then start fresh, Good luck its very easy really once you have it loaded pm me and I'll send you the proper settings.

 

guys plz help me.i have the exact same problem with turkguy.i 'm stuck in step 4.plz help!i dunno what to do

 

Please explain and refresh my memory.

 

that's my prob.the only thing is that i have an isdn connection and i am not using laptop