UK Users - Nagra 3 - Where we stand - Are you missing chans, A Rescan is all you can DO? and Updated with N3 areas in UK

Are they devolo home plugs ?? orange brand ??

 

devolo plugs

 

ok m8 they need to be set up ok i will get you a tut for setting them up and just follow it and you will be fine ok

 

YOU WILL FIRST NEED THE CONFIGURATION TOOL AT THE BOTTOM OF THE POST TO GET YOU STARTED DOWN LOAD IT AND INSTALL IT TO YOUR PC

1 TURN OFF YOUR FIREWALLS AND YOUR ANTIVIRUS FIRST STEP

2 GET FIRST PLUG CONNECT IT TO YOUR WALL CONNECT ETHERNET TO IT THEN CONNECT TO YOUR PC

3 YOU WILL SEE THE TV SCREEN DOWN BESIDE THE CLOCK TRY TO START UP WHEN YOU SEE THIS START THE DLAN CONFIG TOOL

4 NEXT SCREEN YOU SEE WILL BE THE ADAPTER SCREEN LIKE BELOW
AFTER THAT YOU WILL GET SCREEN BELOW SEARCHING FOR THE ADAPTER

5IN THIS SCREEN IT HAS FOUND THE ADAPTER AND YOU GET PASSWORD SCREEN CHOOSE DEFAULT HERE

6 THIS SCREEN SHOWS YOU THE PASSWORD IN WITH ASTRIX

PRESS NEXT TO THIS SCREEN

7 NEXT SCREEN ASKES IF YOU WANT TO ADD ANOTHER TO IT MY ADVICE DO 1 AT A TIME SO SAY NO TO THIS SCREEN

8 THIS IS THE FINISH SCREEN AND YOU ARE DONE


DO THE SAME FOR ANY MORE OF THESE PLUGS YOU HAVE JUST FOLLOW THE STEPS ABOVE

link to firmware below
http://www.devolo.co.uk/consumer/9_dlan-wireless-extender_starter-kit_downloads_7.html?l=en

 

help with my ddigital duo. it wont connect to the starview server im just getting scramble channels

 

stop multiposting, I have answered you in the thread which you have going already,

 

Thanks e45, I will try and sort out the homeplugs later, once I have got my box working, I am beginning to wonder if it's working correctly.

I downloaded the firmware (it said download successful).

I have connected the box to the router with an ethernet cable, it's in Lan4 port. My broadband connection goes in to router's Wan port. When I turned my box on, I expected to see a light come on the router showing it was in Lan4 port, but no light comes on.

I have scanned the box, everything seems okay, until I look at the channels. Only the 5 terrestrial channes are available the rest are scambled. I have also noticed that there are lots of the same channel i.e 22 ITV1's.

So I am not sure if I have a faulty box, or have made the wrong connection's.

Any help would be appreciated.

 

did you flash the box
do you have broadband connected
are you paying for a min cable sub

 

Thanks for your reply hooter.

did you flash the box

Yes, it flashed, before it said download success

do you have broadband connected

Yes

are you paying for a min cable sub

No

 

what is your signal and quality levels like

also go to the system info and tell me what date is on firmware

when you where scanning did you scan on ALL or NETWORK search ??

is Bbc1 on 101 ??

 

what is your signal and quality levels like

Good

also go to the system info and tell me what date is on firmware

9/9/10
when you where scanning did you scan on ALL or NETWORK search ??

Network

is Bbc1 on 101 ??

It's on 101 but also 2035, 2036 etc etc (22 times I think)

 

so you scanned on all and not network ?? as you would not have that many bbc1 channels

signal good what do you call good need % same with quality.

best thing for you to do now is menu installation factory default the box turn off at the back 30 seconds then back on then do a new scan this time only set your Provider and leave the scan set at default and press the green button after that list of net id pick your one and then press ok

 

Signal quality = 77 - 88 %

Network = telewest
Channel search type = network

List id
Liverpool TDN

I get all the channels, but when I go to them they are scambled, except for the 5 terrestrial channels and the VM channels.

 

im haveing the same problems on another box all scrambled apart from freeview

 

have you got your ethernet cable from your router into the back of the box ??

 

Yes, it's connected, but no light on router.

 

The router cable is not doing anything, i just took it off, and i get the same channels.

 

no light on router means your router is not doing anything you need to check your router settings so

 

can you connect ethernet cable to your moden instead of router// main cable to 780 ethernet to modem. if your router is broken.

 

a few had these problems with the starview.6 and most got it sorted with a different lan cable, some had to try more than 1
even though they work on your computer may not on your box!