1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

unspecified recorder error please help

Discussion in 'Nero discussion' started by kna1976, Jan 25, 2008.

  1. kna1976

    kna1976 Member

    Joined:
    Jan 21, 2008
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    hi all

    ive just replaced my old dvdrom with a dvd writter pioneer 115d.
    i also have a cd writter artec wrr 4048 which im going to replace with a lg8162 when it arrives so i can back up my wii games.
    the reason i took out the dvdrom first was when i reinstaled xp a while ago the dvdrom didnt show up in my computer folder but when i put the pioneer 115d in and booted up windows it found the new hardware. every thing ok so far. but when i try to burn a mp3 on a cdr or cdrw (only discs i have as ive only had a cd writter) with the pioneer writter nero gives me a unspecified recorder error.
    the writter does burn cd aswell as dvds dont it? please can someone help as you can tell im a complete noob at this stuff.
    thanks in advance. karl
     
  2. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    Post that error log here. Also make sure that you have the proper jumper settings, cable selec/slave/master set up. Your burner should come with instructions on how it should be installed.
     
  3. kna1976

    kna1976 Member

    Joined:
    Jan 21, 2008
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    thank you for your fast reply

    like i said iam a noob at this stuff but im trying hard please bear with me:)

    right as far as i can work out from the instructions and what you said about jumpers i think this is right the pioneer has a little cap on the far right. the instructions say pin#1 is on as default and pin#1 is ma master.the cd writter has a cap on 2nd from right which on top of cd writter sais sl i take it thats slave. so i think thats what youf talking about jumpers or should there be cables going to each drive? sorry im a complete noob at this.
    also heres the log thank you again for your help

    karl

    1C82-0000-19E5-MAAX-4004-8252-****

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.10.1.2
    Internal Version: 7, 10, 1, 2

    Recorder: <PIONEER DVD-RW DVR-115D>Version: 1.06 - HA 1 TA 0 - 7.10.1.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <ARTEC WRR-4048 >Version: 1.00 - HA 1 TA 1 - 7.10.1.2
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP8004H atapi Port 0 ID 0 DMA: Off
    DiskPeripheral : FUJITSU MPD3130AT atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-RW DVR-115D atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : ARTEC WRR-4048 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    ARTEC WRR-4048 E: CdRom1
    PIONEER DVD-RW DVR-115D F: CdRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1023MB (1048048kB)
    Free physical memory: 582MB (596628kB)
    Memory in use : 43 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    25.1.2008
    CD-ROM (ISO)
    19:53:49 #1 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    19:53:50 #2 Text 0 File Isodoc.cpp, Line 6666
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : FALSE
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    19:53:50 #3 Text 0 File Burncd.cpp, Line 3196
    PIONEER DVD-RW DVR-115D
    Buffer underrun protection activated

    19:53:50 #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    19:53:50 #5 Text 0 File Burncd.cpp, Line 3508
    Turn on Track-At-Once, using CD-R/RW media

    19:53:54 #6 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 359845 ( 79:59.70)
    Last address to be written: 145748 ( 32:25.23)

    19:53:54 #7 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    19:53:54 #8 Text 0 File DlgWaitCD.cpp, Line 2972
    Recorder: PIONEER DVD-RW DVR-115D;
    CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
    ATIP Data:
    Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71)
    Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)

    19:53:54 #9 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    19:53:54 #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 145749 (145749) = #145749/32:23.24
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 145747 blocks [F: PIONEER DVD-RW DVR-115D]
    --------------------------------------------------------------

    19:53:56 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [F: PIONEER DVD-RW DVR-115D] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 298801152, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 145749 | 0 | 0x00
    145749 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    19:53:56 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066
    Removed 2 run-out blocks from end of track 1. Length: 145749 -> 145747.

    19:53:56 #13 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    19:53:56 #14 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

    19:53:56 #15 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    19:53:56 #16 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    19:53:56 #17 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    19:53:56 #18 Phase 32 File dlgbrnst.cpp, Line 1762
    Simulation started at 10x (1,500 KB/s)

    19:53:57 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    19:53:58 #20 Text 0 File MMC.cpp, Line 22379
    Set BUFE: Buffer underrun protection -> ON

    19:53:58 #21 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    19:54:08 #22 SPTI -1 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0xA8
    Sense Qual: 0x03
    CDB Data: 0x2A 00 00 00 00 40 00 00 20 00 00 00
    Sense Area: 0x70 00 05 04 93 00 00 0E 26 08 11 FE A8 03
    Buffer x095700c0: Len x10000
    0xC1 EE 69 B0 11 F9 73 DA 03 4C 87 BD 99 3E 5C FF
    0x7C 68 36 60 9E 03 66 05 A4 54 69 22 0B 86 18 E4
    0xBA 67 1A 00 C6 09 62 4A 61 E0 05 06 09 61 60 60

    19:54:08 #23 CDR -1 File Writer.cpp, Line 303
    Unspecified Recorder Error
    F: PIONEER DVD-RW DVR-115D

    19:54:10 #24 CDR -201 File WriterStatus.cpp, Line 152
    Invalid write state
    F: PIONEER DVD-RW DVR-115D

    19:54:10 #25 TRANSFER -18 File WriterStatus.cpp, Line 152
    Could not perform EndTrack

    19:54:11 #26 Phase 34 File dlgbrnst.cpp, Line 1762
    Simulation failed at 10x (1,500 KB/s)

    19:54:12 #27 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    19:54:15 #28 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    19:54:15 #29 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  4. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    It seems that a new firmware is available for your drive, version 1.18 :

    http://forum.rpc1.org/dl_firmware.php?download_id=2453

    Also, turn the DMA on for your drive Samsung drive.

    It is possible that your Pioneer drive does not like having a slave. Try disconnecting the Artec CDRom and give it a try.

    Prodisc are low quality discs. Try some verbatim or Sony.
     
  5. kna1976

    kna1976 Member

    Joined:
    Jan 21, 2008
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    hi mate

    ive tried dl 1.18 firmware but when i click install it said failed to move to the normal mode.

    also i dont know how to turn the DMA on for the Samsung drive.

    sorry but could give me a step by step guide please.

    thank you karl
     
  6. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
  7. kna1976

    kna1976 Member

    Joined:
    Jan 21, 2008
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    hi cyprusrom

    i havnt looked at the link you just posted i will in a minute just wanted to let you know i unpluged the wrr4048 and burnt a disc at 10x and it worked .
    does that mean when i get the lg dvdrom do i have unplug the pioneer writter plug the lg dvdrom in dump the wii game then unpluge the lg dvdrom and plug the pioneer back in to burn it? ifso its a bit of a pain in the arse but if thats what i have to do then im still happy as i only buy 2 or 3 game a month :). thank you for your help.
    any more help as to get both drivers working togher would be really great.

    thanks karl
     
  8. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    I don't know why it doesn't want to work with a slave, but I've seen it happening before.
    You have a Samsung and a Fujitsu hard drive. Is one only for storage?
    You could put the DVD-ROM as a slave with the hard disc that is master if you don't use both HDD.
     
  9. kna1976

    kna1976 Member

    Joined:
    Jan 21, 2008
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    hi again

    i just done what it said on that link you posted and both primary and secondery ide channels were set to dma if available.
    any more info please

    thanks karl
     
  10. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    DMA if available, but what was the current status?
    Uninstall the drivers anyway, and restart the PC, and let Windows reinstall them.
     
  11. kna1976

    kna1976 Member

    Joined:
    Jan 21, 2008
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    your to fast with your replys :)

    so if i take out the fujitsu hdd and plug the ide cable thats in that hdd to the lg drive it should work? as the fujitsu drive works ok so the lg drive should work am i getting it right?

    thank karl
     
  12. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    Yes,that was what I was thinking, to leave the Pioneer alone as a secondary master, as it seems that is the way it likes it. Can't tell you wahy, not really my piece of cake, but is not the first time I see it. Scroll down to the end of the thread:

    http://club.cdfreaks.com/f87/error-pioneer-dvr-112d-236321/
     
    Last edited: Jan 25, 2008
  13. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    Do you use a 80 wire ribbon cable or 40 wire? Maybe that would make a difference.
     
  14. kna1976

    kna1976 Member

    Joined:
    Jan 21, 2008
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    again your to fast:) or im just slow :(

    primary ide device 0 current transfer mode pio only
    device 1 ultra dma mode 4
    secondary ide device 0 transfer mode pio only current transfer mode ultra dma mode 2
    device 1 dma if available current transfer mode not applicable
     
  15. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    Uninstall all of them and restart the computer.
     
  16. kna1976

    kna1976 Member

    Joined:
    Jan 21, 2008
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    sorry mate i must be getting on you nerves im so thick. about the 80 or 40 wire ide cable i just counted across the wires and there is 40 is that what you mean :)?

    thanks again karl

    ok just going to unistaal drivers back soon
     
    Last edited: Jan 25, 2008
  17. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    :~) LOL, have no worries, if I didn't care to answer, I'd go away.
    You didn't have to count the wires, they are colour coded:~). The 80 pin has a blue end:

    [​IMG]

    The 80 wire gives better data transfer.
     
  18. kna1976

    kna1976 Member

    Joined:
    Jan 21, 2008
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    lol thank you :)

    mine has a black end and red strip down one side.

    ive just uninstalled the drivers one at a time and no luck the tried uninstalling both at the same time then restarting my pc still no luck.
    any more info?

    thanks karl
     
  19. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
  20. kna1976

    kna1976 Member

    Joined:
    Jan 21, 2008
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    hi again

    after reading your last post i checked if they were in pio and only the primary ide device 0 was so i changed all four devices to pio only. and now both drives work :)thank you so much for your help i wish i could do something to help but im so thick :( lol

    again thank you

    karl
     

Share This Page