Hey everyone, I have a bit of a trouble backing up my ISO and image files. I recently bought a 100 pack of Verbatim - MCC004 media code manufacturer - and a DVR-112D Pioneer DVD Burner. Now I THINK it works fine with a compilation of files (I've only backed up one compilation, so i'm not 100% sure yet), but Image files it gives me this error in many programs (here is Nero 7): 9:32:46 PM #20 CDR -1106 File Writer.cpp, Line 299 Power calibration error E: PIONEER DVD-RW DVR-112D I'll post the whole log if necessary. But I've tried my Sony and even my Optodisc (which I have had for like two years now =P) media and they all work fine. I can't identify whether this is a problem with my Blank Verbatims or my new burner... but the fact I can back up a compilation of media makes me confused (which work flawlessly). I've never got an error as "Power Calibration Error" either... I was originally thinking it was Nero, but I tried DVD Decrypter has the same error... I then thought maybe my power cord was loose but being that the burner still burns DVDs with other media and specific files, I started to doubt it. Can anyone help me? it'd be much appreciated. Thank you.
Hi ChaosBeck You may just need a firmware update - the latest one (from May I think) is 1.21. If you're not running 1.21 firmware on the Pioneer update and try again. Burn at 1/2 the rated speed of the media too - for these Verbs - 8x. Still a no go then rest of the most recent log would be good - just be sure to edit out the serial #. They usually begin w/ 1A, 1C or 5C.
I already updated my firmware eariler today and it didn't work =( Also now Compiled files don't work as well =( I always burn my stuff at either 8x or 4x... I use to 2x but this doesn't seem to give me that option. Here is my full log: IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 5:54:32 AM NT-SPTI used Nero Version: 7.5.9.0 Internal Version: 7, 5, 9, 0 Recorder: <PIONEER DVD-RW DVR-112D>Version: 1.21 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PIONEER DVD-RW DVR-112D>Version: 1.21 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-00EVA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3250823A atapi Port 0 ID 1 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-112D atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === PIONEER DVD-RW DVR-112D E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1535MB (1572084kB) Free physical memory: 1002MB (1026220kB) Memory in use : 34 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.6.2007 Burn DVD Image 9:32:28 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 9:32:28 PM #2 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 9:32:28 PM #3 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1701509 (378:06.59, 3323MB) 9:32:28 PM #4 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 9:32:28 PM #5 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: PIONEER DVD-RW DVR-112D, Media type: DVD+R Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 9:32:28 PM #6 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:32:28 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1701510 (1701510) = #1701510/378:6.60 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1701360 blocks [E: PIONEER DVD-RW DVR-112D] -------------------------------------------------------------- 9:32:28 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [E: PIONEER DVD-RW DVR-112D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3484692480, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1701510 | 1701360 | 0x00 0 | 1 | 1 | 0x41 | 1701510 | 1701360 | 0x00 1701510 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 9:32:28 PM #9 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:32:28 PM #10 Phase 24 File dlgbrnst.cpp, Line 1746 Caching of files started 9:32:28 PM #11 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 9:32:28 PM #12 Phase 25 File dlgbrnst.cpp, Line 1746 Caching of files completed 9:32:28 PM #13 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 8x (11,080 KB/s) 9:32:29 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:32:29 PM #15 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MCC..... Media type ID: 004 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8 23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 9:32:29 PM #16 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x062c5040: Len x648 9:32:29 PM #17 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 9:32:30 PM #18 Text 0 File Cdrdrv.cpp, Line 1292 21:32:30.271 - E: PIONEER DVD-RW DVR-112D : Queue again later 9:32:46 PM #19 SPTI -1106 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0E 00 00 00 00 73 03 Buffer x221c0640: Len x10000 0xF0 00 A0 C7 40 10 01 46 00 10 00 46 C0 BD 03 46 0x40 CE 01 46 04 00 43 10 00 C6 00 46 02 00 20 12 0x00 00 00 00 01 00 10 64 C3 00 00 52 84 07 42 8E 9:32:46 PM #20 CDR -1106 File Writer.cpp, Line 299 Power calibration error E: PIONEER DVD-RW DVR-112D 9:32:46 PM #21 Phase 127 File dlgbrnst.cpp, Line 1746 Generating DVD high compatibility borders 9:32:47 PM #22 Phase 129 File dlgbrnst.cpp, Line 1746 Generating DVD borders completed successfully 9:32:47 PM #23 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 8x (11,080 KB/s) 9:32:47 PM #24 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:32:51 PM #25 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 9:32:51 PM #26 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Nothing stands out in the log & since it burns other non verb discs don't think the other solutions for calibration may apply here - like switch power connector, don't used a shared power connection, switch the drive to master (or slave - depending on the confirmation) Plus this drive is on it's own ide connection. I think you may have bad batch of Verbatim - they're usually very good but then again nothings 100%. I'd take them and exchange them.
Damn, Well that blows. I'm gonna try burning it on my other DVD Burner on my other computer and if that doesn't work, I'm gonna do as you say and return them... hopefully Futureshop wont be harda$$es like they've done before Thank you for your help! It is most appreciated. =D
ChaosBeck, make sure those Verbatims are "Made In Singapore" NOT India. the ones "made In India" can cause problems. stick with getting them from supermediastore.com or meritline.com those are you're best bet
Don't worry, I checked RIGHT when I opened my box =P (Ordered online) Wait... Singapore? I've heard the ones made in Taiwan were the good ones. Also... for some reason... they're now working... the first disc was fine, the next three were bad, now everything else is fine... man that's weird (also looking at some of the raw data... the second line, there are three codes that are different from some... weird)
Taiwan and Singapore would be good. Since you have some working now maybe just had a few bad ones (?) I'd try and burn a few more. I've had it happen - not often - but hey nothing's perfect
I've had one bad Verbatim DVD+R DL out of about 120 and it recorded fine but the picture quality was a little fuzzy for the first 30 mins or so then it straight out
