But is it not possible that I may have "disabled a necessary service? And that it can't turn back on? If so which one? Thanks
Sorry, please could you explain in slightly more detail? I understand Device Manager - but what "controller". I don't have one called Adaptec - which device am I supposed to look in?
I guess its possible but you would know it. There is only 2 ways to disable services and you would know you are doing it and would need to know what you are doing when doing it. The first is the System Configuration Utility. The Services tab shows you the services. And the second is Open Control Panel/Administrative ToolsServices or else select Start/Run, type services.msc But again you need to know what services are and what you are doing when messing with them. The controler that is operating with the driver. Should be scsi or raid. Again with this being a dell you may need to contact them or have someone you know that knows computer hardware to take a look at it.
Thanks again: 1) I have turned off various services - all very consciously and carefully, though I don't remember now. What I want to know is what is the name of the service that would be relevant to this driver? 2) There is no reference to RAID or SCSI in Device Manager. I really don't understand what this driver does or how to update it - although Nero seems to want it and be unable to recognise it. What can be the solution? I'm sure it's obvious to someone here. Thanks so much for all your patience so far.
anyone know why lately on some of the burnt movies in the last 10mins or so the movie freezes?I use taiyo yuden. Burn at 6x cause i find it freezes more when i burn at 4x. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <SONY DVD RW DRU-800A> Version: KY06 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TOSHIBA DVD-ROM SD-R2412>Version: 1431 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R2412 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R2412 D: CDRom0 SONY DVD RW DRU-800A E: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 750MB (768816kB) Free physical memory: 381MB (390944kB) Memory in use : 49 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.1.2006 ISO compilation 2:48:05 PM #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:48:05 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 2:48:05 PM #3 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DRU-800A running 2:48:05 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 2:48:05 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 2:48:06 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2201791 (489:17.16, 4300MB) 2:48:06 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 2:48:06 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: SONY DVD RW DRU-800A, Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 2:48:06 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:48:06 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2201792 (2201792) = #2201792/489:17.17 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2201792 blocks [SONY DVD RW DRU-800A] -------------------------------------------------------------- 2:48:06 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [SONY DVD RW DRU-800A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509270016, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2201792 | lead-out | 1 | 0x41 | 0x00 2:48:06 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 2:48:07 PM #13 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 2:48:07 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 2:48:07 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 6x (8,310 KB/s) 2:48:07 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:48:07 PM #17 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 2:48:07 PM #18 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON 2:48:07 PM #19 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 2:48:07 PM #20 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:48:47 PM #21 Text 0 File Cdrdrv.cpp, Line 1288 14:48:47.281 - SONY DVD RW DRU-800A\H2 T0 : Queue again later 2:58:30 PM #22 Text 0 File WriterStatus.cpp, Line 116 <SONY DVD RW DRU-800A > start writing Lead-Out at LBA 2201792 (2198C0h), lenght 0 blocks 2:58:30 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:58:30 PM #24 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was 2201791 2:58:56 PM #25 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 6x (8,310 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/14/2005 3:12:14 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
