1A20-0316-0010-1205-0007-9835 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 6.6.1.4 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 1, 4d Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A102 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 3 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4081B D: CDRom0 HL-DT-ST DVD-ROM GDR8162B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (522988kB) Free physical memory: 229MB (234956kB) Memory in use : 55 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.2.2006 NeroAPI 7:39:58 AM #1 Phase 112 File APIProgress.cpp, Line 275 DVD-Video files reallocation started 7:39:58 AM #2 Phase 114 File APIProgress.cpp, Line 275 DVD-Video files reallocation completed (no file modified) 7:39:58 AM #3 Phase 111 File APIProgress.cpp, Line 275 DVD-Video files sorted 7:39:58 AM #4 NEROAPI 7 File Burncd.cpp, Line 3095 Error:\nCannot connect TRF. 7:39:58 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 7:39:58 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
The top line in your post is your serial #. You should edit you post to remove it. Your burners firmware is a bit old newer is here http://forum.rpc1.org/dl_firmware.php?download_id=1757 This may be a problem. It seems your dvd burner and dvd rom is on secondary raid controler. The best place for them would be the secondary ide controler not secondary ide raid. You may need to look in the motherboard manual to see where each controler is located.
Whompus & Timmid- Others are having this problem. See this link for possible solution: http://forums.afterdawn.com/thread_view.cfm/1/300028
@timmid Your problem is most definitely here as pointed out by FiremanDB ****************************** Error:\nCannot connect TRF ****************************** Version 6.6.1.4 of nero will not autoburn when used with DVDshrink, what you need to do is to install version 6.6.0.18 for it to work properly. Uninstall nero 6.6.1.4 using the nero general cleantool found here: http://ww2.nero.com/nero6/enu/General_CleanTool.html After the uninstall is complete, you can install version 6.6.0.18 by downloading the file from any of the links provided, when the installation is complete just enter your serial number and you're good to go. http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe EDIT: While you're at it, you should also update your burner's firmware, it's a bit old at version A102. The most current version is A106, you can get it by clicking on the link provided and entering your burner's model# (GSA-4081B) in the search field then click search, once displayed click on the A106 choice to download it, follow the instructions for installation. http://forum.rpc1.org/dl_search.php
After you do the clean uninstall you will no longer have recode or vision express. If you want them they are there to. This is the links to package 2 for recode and vision express for 6.6.0.18. http://httpdl2.usw.nero.com/NVE-3.1.0.21_no_yt.exe http://httpdl1.usw.nero.com/NVE-3.1.0.21_no_yt.exe If you want to browse what all is offered there for download just copy either ftp addys into the browser address bar. ftp://ftp1.usw.nero.com ftp://ftp2.usw.nero.com
No problem. They are just http links to those 2 ftp servers. But if you http to the server without a file linked in the tag you will just get the welcome message. So I put the ftp links there as well for browsing.
I did as you recommended and now this is the new error that I get. Any suggestions? 1A20-0316-0010-1205-0007-9835 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A106 - HA 3 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 3 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4081B D: CDRom3 HL-DT-ST DVD-ROM GDR8162B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (522988kB) Free physical memory: 181MB (186188kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.2.2006 NeroAPI 9:08:41 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 9:08:42 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 9:08:42 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 9:08:42 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 9:08:42 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 9:08:42 PM #6 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4081B running 9:08:42 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 9:08:42 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 9:08:42 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 9:08:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286095 (508:01.20, 4465MB) 9:08:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 9:08:42 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD+R Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 7 9:08:42 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:08:42 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286096 (2286096) = #2286096/508:1.21 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286096 blocks [HL-DT-ST DVDRAM GSA-4081B] -------------------------------------------------------------- 9:08:42 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681924608, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286096 | lead-out | 1 | 0x41 | 0x00 9:08:42 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 9:08:42 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 9:08:42 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 9:08:42 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 9:08:42 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:08:42 PM #21 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MBIPG101 Media type ID: R05 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8 23 54 37 11 02 3C 6E 02 - 84 68 15 15 0B 0B 08 08 #T7..<n..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 9:08:42 PM #22 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 9:32:38 PM #23 Text 0 File WriterStatus.cpp, Line 116 <HL-DT-ST DVDRAM GSA-4081B> start writing Lead-Out at LBA 2286096 (22E210h), lenght 0 blocks 9:32:38 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:33:05 PM #25 SCSI -1194 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 3, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x35 0x20 0x03 0x0E 0x73 0x04 9:33:05 PM #26 CDR -1194 File ThreadedTransferInterface.cpp, Line 1916 PMA update failure HL-DT-ST DVDRAM GSA-4081B\H3 T0 9:33:05 PM #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1916 Could not perform end of Disc-at-once 9:33:32 PM #28 SCSI -1194 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 3, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x35 0x23 0x03 0x0E 0x73 0x04 9:33:32 PM #29 Phase 127 File APIProgress.cpp, Line 276 Generating DVD high compatibility borders 9:33:32 PM #30 Phase 129 File APIProgress.cpp, Line 276 Generating DVD borders completed successfully 9:33:32 PM #31 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 4x (5,540 KB/s) 9:33:32 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 9:33:32 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\InCDfs.SYS': Ver=4, 1, 0, 2, size=91712 bytes, created 12/17/2003 4:42:46 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 1, 0, 2, size=28752 bytes, created 12/17/2003 4:43:10 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 1, 0, 2, size=9341 bytes, created 12/17/2003 4:42:52 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Your serial number is in both of your posts. You need to remove it before it is stollen by some hack. It is the first line of both posts starting with 1A20-xxxx-xxxx-xxxx-xxxx-xxxx I am not an expert at these logs like whompus and johnl123 but this is what I see going on: You have INCD installed. That conflict with Nero Burning softs. Use Nero Ceaning Tool to uninstall it: http://www.nero.com/nero6/enu/InCD_CleanTool.html Don't know what DVD's you are using (looks like Prodisc-not the best) but your burner doesn't like them according to your log: Most of the experts on AD recommend Verbatim or Taiyo Yuden DVD media. Sony, Fuji and Maxell are good if they are made in Japan. Cheap crappy DVD's can cause lots of headaches.
Nope those are Moser Bauer manufactured discs...probably TDK, and right up there on top of the pile with CMC Mags. You are also burning too close to the edge of the disc, set your target size to 4300, especially with those discs. A better quality disc you could up the size to 4400. This message means the burner can't burn to the discs you are trying to use. Just to reemphasize what many others have already stated in this thread, get some decent media. Verbatim or Taiyo Yuden, Sony, Fuji, Maxell(made in Japan).