Any thoughts...thanks very much! ++++++++++++++++++++++++++ Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/19/2004 11:41:48 AM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d (Nero Express) Recorder: <TOSHIBA DVD-ROM SD-R6112>Version: 1031 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TOSHIBA DVD-ROM SD-R6112>Version: 1031 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : TOSHIBA DVD-ROM SD-R6112 atapi Port 1 ID 0 DMA: Off DiskPeripheral : TOSHIBA MK6021GAS GA02 ultra Port 2 ID 0 DMA: Off === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R6112 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047528kB) Free physical memory: 609MB (624312kB) Memory in use : 40 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.1.2007 UDF compilation 5:09:44 PM #1 Text 0 File Isodoc.cpp, Line 6475 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : pure UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical 5:09:44 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 5:09:44 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 5:09:44 PM #4 Text 0 File Writer.cpp, Line 122 Writer TOSHIBA DVD-ROM SD-R6112 running 5:09:44 PM #5 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 5:09:44 PM #6 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1755215 (390:02.65, 3428MB) 5:09:44 PM #7 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 5:09:44 PM #8 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: TOSHIBA DVD-ROM SD-R6112, Media type: DVD-R Disc Manufacturer: CMC MA - G. AF1 Disc Application Code: 64, Disc Physical Code: 193 5:09:44 PM #9 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:09:44 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1755216 (1755216) = #1755216/390:2.66 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1755216 blocks [TOSHIBA DVD-ROM SD-R6112] -------------------------------------------------------------- 5:09:44 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [TOSHIBA DVD-ROM SD-R6112] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3594682368, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1755216 | lead-out | 1 | 0x41 | 0x00 5:09:44 PM #12 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:09:44 PM #13 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 5:09:44 PM #14 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 5:09:45 PM #15 Text 0 File Burncd.cpp, Line 4145 Cache writing successful. 5:09:45 PM #16 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 5:09:45 PM #17 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 2x (2,770 KB/s) 5:09:45 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:09:45 PM #19 Text 0 File DVDR.cpp, Line 2707 Recording mode: Sequential Recording Mode 5:09:45 PM #20 Text 0 File DVDR.cpp, Line 2863 Start write address at LBA 0 DVD high compatibility mode: Yes 5:09:45 PM #21 Text 0 File Cdrdrv.cpp, Line 8647 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 30000 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 5:44:55 PM #22 SPTI -1135 File SCSIPassThrough.cpp, Line 289 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 14 96 60 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x0c410000: Len x10000 0x00 00 00 00 00 00 90 0F D0 A3 00 00 00 00 00 00 0x00 00 00 00 90 0F D0 A3 00 00 00 00 00 00 00 00 0x00 00 90 0F D0 A3 00 00 00 00 00 00 00 00 00 00 5:44:55 PM #23 CDR -1135 File Writer.cpp, Line 311 Write error D: TOSHIBA DVD-ROM SD-R6112 5:44:55 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 5:44:57 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 5:44:57 PM #26 Text 0 File DVDR.cpp, Line 3103 EndDAO: Last written address was 1349215 5:44:57 PM #27 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/19/2004 11:41:48 AM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
well i see a dvd-rom drive listed, im guessing its a combo drive, I dont know much about this but i do see that your DMA is off.
Hi. dkraut is correct. Your drives seem to have slipped into PIO mode from DMA mode where they should be. Use Device Manager to uninstall your IDE channels to reset the transfer mode to DMA. Here's a link to a guide: http://forums.afterdawn.com/thread_view.cfm/260038 Nero 6.6.1.4 is a lousy version. Downgrade to version 6.6.0.18 by uninstalling the current version, running the Nero 6 Clean Tool, and then installing the following two 6.6.0.18 packages. Be sure to have your Nero program serial number available for reinstalling. http://ww2.nero.com/nero6/enu/Nero_6_CleanTool.html Package 1: http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2: http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe There's a newer firmware 1033 available for your burner: http://www.toshiba-europe.com/storage/products/Drivers/SDR6112_1x33.zip This is poor quality media. Use Verbatim, Taiyo Yuden or Made in Japan labeled media, especially Fuji and Sony. Edit: text added below. If you continue to have problems using Nero, output a folder of video files or an image (ISO) file from your authoring software and use ImgBurn to burn the folder or ISO (image) file. http://www.imgburn.com
newest firmware is 1033, get it here - http://forum.rpc1.org/dl_firmware.php?download_id=1603 DMA needs to be on for everything DMA guide here - http://forums.afterdawn.com/thread_view.cfm/260038 cmc disc are low quality media, quality media is a must use verbatim or taiyo yuden peace
@Bigfatboy I just happened to be passing by responding to an earlier post 12 hours ago. I'm not usually around at this time so please keep posting!
Thanks so much for the prompt responses! I'll try upgrading the firmware, different media, and turning DMA on... stay tuned...
