1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

write errors

Discussion in 'Nero discussion' started by duzeke, Dec 13, 2005.

  1. duzeke

    duzeke Member

    Joined:
    Sep 14, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Hey all, I have had some problem witing after backing up a couple of dvd's and was wondering if it is my burner or a different problem? I have been having trouble reading new blank DVD's also. I have included the log files from Rambo 3 and Monte Python and the Holy Grail disc 2 (disc one burned fine). Any help from the experts here would be appreciated!

    Rambo 3
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'F:\Program Files\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b
    (Nero Express)
    Recorder: < 16X8 DVD DUAL> Version: A060 - HA 1 TA 1 - 6.6.0.16
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: < 16X8 DVD DUAL >Version: A060 - HA 1 TA 1 - 6.6.0.16
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : QUANTUM FIREBALLlct20 20 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : 16X8 DVD DUAL atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    16X8 DVD DUAL E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 49283072 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 318MB (326128kB)
    Free physical memory: 98MB (100976kB)
    Memory in use : 69 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    4.12.2005
    UDF/ISO compilation
    3:13:44 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    3:13:45 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    3:13:45 AM #3 Text 0 File Isodoc.cpp, Line 6356
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    3:13:45 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    3:13:45 AM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    3:13:46 AM #6 Text 0 File Writer.cpp, Line 122
    Writer 16X8 DVD DUAL running

    3:13:46 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    3:13:46 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    3:13:46 AM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    3:13:46 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2253519 (500:46.69, 4401MB)

    3:13:46 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    3:13:46 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: 16X8 DVD DUAL, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    3:13:46 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    3:13:46 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2253520 (2253520) = #2253520/500:46.70
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2253520 blocks [16X8 DVD DUAL]
    --------------------------------------------------------------

    3:13:46 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [16X8 DVD DUAL] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4615208960, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2253520 | lead-out | 1 | 0x41 | 0x00

    3:13:46 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    3:13:47 AM #17 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    3:13:47 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    3:13:47 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    3:13:47 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    3:13:47 AM #21 Text 0 File DVDR.cpp, Line 2379
    Recording mode: Sequential Recording Mode

    3:13:47 AM #22 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

    3:13:47 AM #23 Text 0 File DVDR.cpp, Line 2534
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    3:13:47 AM #24 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    3:15:19 AM #25 SCSI -1135 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06360000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x6C 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x6A 0x00 0x0E
    0x00 0x00 0x00 0x00 0x0C 0x00

    3:15:19 AM #26 CDR -1135 File Writer.cpp, Line 311
    Write error

    3:15:19 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    3:15:19 AM #28 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    3:15:19 AM #29 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was 27647

    3:15:28 AM #30 SCSI -1135 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03464C00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x6A 0x00 0x0E
    0x00 0x00 0x00 0x00 0x0C 0x00

    3:15:28 AM #31 CDR -1135 File WriterStatus.cpp, Line 167
    Write error

    3:15:28 AM #32 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    3:15:28 AM #33 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 5/10/2005 3:04:10 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 10:53:28 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 10:53:04 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 10:53:30 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 9:00:00 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



    Monte Python HG disc 2


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'F:\Program Files\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b
    (Nero Express)
    Recorder: < 16X8 DVD DUAL> Version: A060 - HA 1 TA 1 - 6.6.0.16
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: < 16X8 DVD DUAL >Version: A060 - HA 1 TA 1 - 6.6.0.16
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : QUANTUM FIREBALLlct20 20 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : 16X8 DVD DUAL atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    16X8 DVD DUAL E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 49283072 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 318MB (326128kB)
    Free physical memory: 73MB (75100kB)
    Memory in use : 76 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.12.2005
    UDF/ISO compilation
    11:38:15 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    11:38:17 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    11:38:17 PM #3 Text 0 File Isodoc.cpp, Line 6356
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    11:38:18 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    11:38:18 PM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    11:38:18 PM #6 Text 0 File Writer.cpp, Line 122
    Writer 16X8 DVD DUAL running

    11:38:18 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    11:38:18 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    11:38:19 PM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    11:38:19 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1908607 (424:08.07, 3727MB)

    11:38:19 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    11:38:19 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: 16X8 DVD DUAL, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    11:38:19 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:38:19 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1908608 (1908608) = #1908608/424:8.8
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1908608 blocks [16X8 DVD DUAL]
    --------------------------------------------------------------

    11:38:19 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [16X8 DVD DUAL] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3908829184, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1908608 | lead-out | 1 | 0x41 | 0x00

    11:38:20 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    11:38:20 PM #17 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    11:38:20 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    11:38:20 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    11:38:20 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    11:38:20 PM #21 Text 0 File DVDR.cpp, Line 2379
    Recording mode: Sequential Recording Mode

    11:38:20 PM #22 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

    11:38:20 PM #23 Text 0 File DVDR.cpp, Line 2534
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:38:20 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:51:44 PM #25 Text 0 File WriterStatus.cpp, Line 116
    < 16X8 DVD DUAL > start writing Lead-Out at LBA 1908608 (1D1F80h), lenght 0 blocks

    11:51:44 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:51:44 PM #27 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was 1908607

    11:55:09 PM #28 SCSI -1135 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03464C00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF1 0x00 0x03 0x00 0x1A 0x18 0xD0 0x0E
    0x00 0x00 0x00 0x00 0x0C 0x00

    11:55:09 PM #29 CDR -1135 File ThreadedTransferInterface.cpp, Line 1909
    Write error

    11:55:09 PM #30 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909
    Could not perform end of Disc-at-once

    11:55:09 PM #31 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was -1

    11:55:09 PM #32 CDR -201 File WriterStatus.cpp, Line 167
    Invalid write state
    16X8 DVD DUAL\H1 T1

    11:55:09 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    11:55:09 PM #34 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 5/10/2005 3:04:10 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 10:53:28 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 10:53:04 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 10:53:30 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 9:00:00 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  2. whompus

    whompus Active member

    Joined:
    Dec 2, 2002
    Messages:
    1,370
    Likes Received:
    0
    Trophy Points:
    66
    Incd is runing on your system and for the most part not good to be there. Some people do however like to use it.

    I am more drawn to your burner. What is it? From looking at the version of the firmware I suspect it is liteon or aopen or something. Know what it is exactly and check if there is newer firmware for it. If it is the one I suspect, there is newer firmware.
     
  3. cougar_ii

    cougar_ii Regular member

    Joined:
    Aug 19, 2004
    Messages:
    1,961
    Likes Received:
    0
    Trophy Points:
    46
    Hi there,

    As mentioned above, get rid of [bold]InCD[/bold].

    You using lots of your memory, try to free some up.
    *OR* slow down the burn to x2.0 and see if it helps !

    But get rid of this crap InCD :)
     
  4. duzeke

    duzeke Member

    Joined:
    Sep 14, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Thanks a lot! I thought I had INCD removed already. I will dive into that further. I don't remember the name of the burner right off hand but I got it for Christmas last year. It was ordered from NewEgg. I will do a firmware upgrade check also.

    Thanks again for your help!
     
  5. alkohol

    alkohol Regular member

    Joined:
    Apr 6, 2005
    Messages:
    4,899
    Likes Received:
    0
    Trophy Points:
    46
    Lately, I've seen a lot of failure/failed burns from Ritek. So maybe you may want to try other high quality like Yuden, Verbatim and Maxell (Hitachi - made in japan).

    Your burner doesn't like the media you're using. Make sure burner's firmware is up to date. Again, see above reply for other high quality media.

    InCD and Nero don't get along well, so you'll need to completely wipe out InCD from your system. Go here http://www.nero.com/nero6/enu/InCD_CleanTool.html and get InCD to clean all of its products from your system.
     
    Last edited: Dec 14, 2005
  6. duzeke

    duzeke Member

    Joined:
    Sep 14, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    It figures, I just bought 100 Ritek 8x DVD's. I removed the rest of InCD and then my DVD drive could not be found. Yeah. I Do not know the Brand of DVD drive (AO60 firmware), it didn't come with any manual or anything, just NERO software that I remember. I am still searching for another disc though that would have the drivers on it. I did a restore to get the settings back and now I am running out of time as usual. That darn thing called WORK always seems to get in the way of things!
    I will try the the removal tools later and see how that works. I can always give out nice shiny coaster sets for Christmas!
     
    Last edited: Dec 15, 2005

Share This Page