Please help me!! my cd burner doesn't work...tell me what to do...thanks ********************************************************************** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\ARCHIV~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16:21:30 Nero Version: 6.6.0.6 (Nero Express) Recorder: <HL-DT-ST CD-RW GCE-8481B>Version: 1.05 - HA 1 TA 0 - 6.6.0.6 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TOSHIBA DVD-ROM SD-M1712>Version: 1004 - HA 1 TA 1 - 6.6.0.6 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8481B atapi Port 1 ID 0 DMA: Off CdRomPeripheral : TOSHIBA DVD-ROM SD-M1712 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST CD-RW GCE-8481B D: CDRom0 TOSHIBA DVD-ROM SD-M1712 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 72351744 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 495MB (507376kB) Free physical memory: 168MB (172336kB) Memory in use : 66 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.2.2006 CD-ROM (MP3) 8:51:11 #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:51:11 #2 Text 0 File Burncd.cpp, Line 2870 HL-DT-ST CD-RW GCE-8481B Buffer underrun protection activated 8:51:12 #3 Text 0 File Reader.cpp, Line 127 Reader running 8:51:12 #4 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST CD-RW GCE-8481B running 8:51:12 #5 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 8:51:12 #6 Text 0 File Burncd.cpp, Line 3155 Turn on Track-at-once, using CD-R/RW media 8:51:12 #7 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 358400 ( 79:40.50) 8:51:12 #8 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO (enabled: CD) 8:51:12 #9 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: HL-DT-ST CD-RW GCE-8481B; CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 8:51:12 #10 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:51:12 #11 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 358401 (358401) = #358401/79:38.51 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358399 blocks [HL-DT-ST CD-RW GCE-8481B] -------------------------------------------------------------- 8:51:12 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [HL-DT-ST CD-RW GCE-8481B] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 734312448, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 358401 | lead-out | 1 | 0x41 | 0x00 8:51:12 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1110 Removed 2 run-out blocks from end of track 1. Length: 358401 -> 358399. 8:51:12 #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 8:51:12 #15 Text 0 File Burncd.cpp, Line 4042 Cache writing successful. 8:51:12 #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 8:51:12 #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (1.200 KB/s) 8:51:12 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:51:12 #19 Text 0 File Mmc.cpp, Line 21079 Set BUFE: Buffer underrun protection -> ON 8:51:40 #20 SCSI -1135 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09840000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 8:51:40 #21 CDR -1135 File Writer.cpp, Line 311 Write error 8:51:40 #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:51:40 #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:51:40 #24 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state HL-DT-ST CD-RW GCE-8481B\H1 T0 8:51:40 #25 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 8:51:40 #26 Text 0 File Mmc.cpp, Line 15779 <HL-DT-STCD-RW GCE-8481B > start Close Session 8:51:43 #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (1.200 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
You have to turn DMA on for your drive Here is a guide to follow: http://my.afterdawn.com/alkohol/blog_entry.cfm/231/dmaissues I would also update Nero : ftp://ftp.us2.nero.com/Nero-6.6.0.18_no_yt.exe
Here are the links to nero6 version 6.6.0.18 if needed. Package 1 http://httpdl2.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 http://httpdl2.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe
Thanks for your advice I followed all the steps and it was really easy to follow the instructions but I still get the error message. Another person told me that probably I have problems with my win xp installation and that's why I am getting that message or that it is a virus because I downloaded music from pc 2 pc programs. I am really grateful for your advice. Thanks to all. ********************************************************************** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\ARCHIV~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16:21:30 Nero Version: 6.6.0.6 (Nero Express) Recorder: <HL-DT-ST CD-RW GCE-8481B>Version: 1.05 - HA 1 TA 0 - 6.6.0.6 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TOSHIBA DVD-ROM SD-M1712>Version: 1004 - HA 1 TA 1 - 6.6.0.6 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8481B atapi Port 1 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-M1712 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST CD-RW GCE-8481B D: CDRom0 TOSHIBA DVD-ROM SD-M1712 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 72351744 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 495MB (507376kB) Free physical memory: 16MB (17076kB) Memory in use : 96 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.2.2006 CD-ROM (MP3) 11:16:29 #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:16:29 #2 Text 0 File Burncd.cpp, Line 2870 HL-DT-ST CD-RW GCE-8481B Buffer underrun protection activated 11:16:29 #3 Text 0 File Reader.cpp, Line 127 Reader running 11:16:29 #4 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST CD-RW GCE-8481B running 11:16:29 #5 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 11:16:29 #6 Text 0 File Burncd.cpp, Line 3155 Turn on Track-at-once, using CD-R/RW media 11:16:30 #7 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 358400 ( 79:40.50) 11:16:30 #8 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO (enabled: CD) 11:16:30 #9 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: HL-DT-ST CD-RW GCE-8481B; CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 11:16:30 #10 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:16:30 #11 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 358401 (358401) = #358401/79:38.51 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358399 blocks [HL-DT-ST CD-RW GCE-8481B] -------------------------------------------------------------- 11:16:30 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [HL-DT-ST CD-RW GCE-8481B] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 734312448, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 358401 | lead-out | 1 | 0x41 | 0x00 11:16:30 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1110 Removed 2 run-out blocks from end of track 1. Length: 358401 -> 358399. 11:16:30 #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:16:30 #15 Text 0 File Burncd.cpp, Line 4042 Cache writing successful. 11:16:30 #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:16:30 #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 24x (3.600 KB/s) 11:16:30 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:16:30 #19 Text 0 File Mmc.cpp, Line 21079 Set BUFE: Buffer underrun protection -> ON 11:17:20 #20 SCSI -1135 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09860000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 11:17:20 #21 CDR -1135 File Writer.cpp, Line 311 Write error 11:17:20 #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:17:20 #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:17:20 #24 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state HL-DT-ST CD-RW GCE-8481B\H1 T0 11:17:20 #25 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 11:17:20 #26 Text 0 File Mmc.cpp, Line 15779 <HL-DT-STCD-RW GCE-8481B > start Close Session 11:18:17 #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 24x (3.600 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
You don't seem to have enough memory. Close ant other progrmas running, including Antivirus. Also, you might want to try another disc, as it seems that your drive does not like the media u used: Also, you have the same Nero version.You should upgrade from the links provided. To remove the old version of nero, you do not uninstall from Control Panel. You have to download and run Nero Cleaning Tool from Nero web site.
well..I did update nero..but it seems that the problem is not the cd burner but win xp...thanks ****************************************************************** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Archivos de programa\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <HL-DT-ST CD-RW GCE-8481B>Version: 1.05 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TOSHIBA DVD-ROM SD-M1712>Version: 1004 - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8481B atapi Port 1 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-M1712 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST CD-RW GCE-8481B D: CDRom0 TOSHIBA DVD-ROM SD-M1712 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 72351744 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 495MB (507376kB) Free physical memory: 169MB (173848kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.2.2006 CD-ROM (MP3) 11:52:00 #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:52:00 #2 Text 0 File Burncd.cpp, Line 2948 HL-DT-ST CD-RW GCE-8481B Buffer underrun protection activated 11:52:00 #3 Text 0 File Reader.cpp, Line 127 Reader running 11:52:00 #4 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST CD-RW GCE-8481B running 11:52:00 #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:52:00 #6 Text 0 File Burncd.cpp, Line 3233 Turn on Track-At-Once, using CD-R/RW media 11:52:00 #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 358402 ( 79:40.52) 11:52:00 #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 11:52:00 #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST CD-RW GCE-8481B; CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 11:52:00 #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:52:00 #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 358403 (358403) = #358403/79:38.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358401 blocks [HL-DT-ST CD-RW GCE-8481B] -------------------------------------------------------------- 11:52:00 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST CD-RW GCE-8481B] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 734316544, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 358403 | lead-out | 1 | 0x41 | 0x00 11:52:00 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119 Removed 2 run-out blocks from end of track 1. Length: 358403 -> 358401. 11:52:00 #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:52:00 #15 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 11:52:00 #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:52:00 #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 16x (2.400 KB/s) 11:52:00 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:52:00 #19 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 11:52:36 #20 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03770000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 11:52:36 #21 CDR -1135 File Writer.cpp, Line 311 Write error 11:52:36 #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:52:37 #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:52:37 #24 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state HL-DT-ST CD-RW GCE-8481B\H1 T0 11:52:37 #25 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 11:52:37 #26 Text 0 File Mmc.cpp, Line 16452 <HL-DT-STCD-RW GCE-8481B > start Close Session 11:53:29 #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 16x (2.400 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@Bruma Try some decent media 1st - Moser Baer is not 'A' list stuff. Have your tried different cd's? Use Made in Japan Maxell or Fuji cd's.