1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

writing lead-out failed on X4SPEED DVD-R DL 8,5GB

Discussion in 'Nero discussion' started by vmlinuz, Dec 26, 2008.

  1. vmlinuz

    vmlinuz Member

    Joined:
    Dec 26, 2008
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Tried to write on DL disk (8,5 GB), error while writing lead-out (in other cases - upon simulating lead-out write), claimed to be a hardware one:

    16:17:19 #27 SCSI -1119 File SCSIInterface.cpp, Line 623
    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0xa86baf00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x03
    CDB Data: 0x2A 0x00 0x00 0x20 0x32 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x09 0x03

    What does it mean?

    Here is a full log:

    ***serial number hidden***

    Linux 2.6.9-67.ELsmp
    Nero API version: 7.20.6.1
    Using interface version: 7.5.1.3
    Installed in: /usr/lib/nero/
    Application: Nero AG\Nero Linux
    Internal Version: 7, 20, 6, 1

    Recorder: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.02 - HA 0 TA 0 - 0.0.0.0
    Adapter driver: <ide-cdrom> HA 0
    Drive buffer : 2048kB
    Bus Type : default
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1008MB (1033104kB)
    Free physical memory: 101MB (104028kB)
    Memory in use : 89 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.12.2008
    NeroAPI
    16:03:51 #1 ISO9660GEN -11 File Geniso.cpp, Line 3350
    First writeable address = 0 (0x00000000)

    16:03:51 #2 Text 0 File Burncd.cpp, Line 3552
    Turn on Disc-At-Once, using DVD media

    16:03:51 #3 Text 0 File FilesystemSettingsValidator.cpp, Line 139
    FS Settings: using validator 'CUDFSettingsValidatorDVD'
    ParamMode = 'manual', changing UDF partition type from 'physical' to 'physical'
    Changing UDF revision from '1.02' to '1.02'

    16:03:51 #4 Text 0 File DlgWaitCD.cpp, Line 307
    Total disc capacity: 4171712 (927:02.62, 8147MB)
    User data to be written: 4119168 (915:22.18, 8045MB)
    Free space on LJR disc: 4171712 (927:02.62, 8147MB)

    16:03:51 #5 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO

    16:03:51 #6 Text 0 File DlgWaitCD.cpp, Line 2983
    Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD-R Dual Layer
    Disc Manufacturer ID: <CMC MA> <G. AD4>
    Disc Application Code: 2, Disc Physical Code: 145

    16:03:51 #7 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    16:03:51 #8 Text 0 File ThreadedTransferInterface.cpp, Line 778
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 4119168 (4119168) = #4119168/915:22.18
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4119168 blocks [HL-DT-ST DVD-RAM GSA-H55N (H:0 T:0)]
    --------------------------------------------------------------

    16:03:51 #9 Text 0 File ThreadedTransferInterface.cpp, Line 979
    Prepare [HL-DT-ST DVD-RAM GSA-H55N (H:0 T:0)] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8436056064, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 4119168 | 0 | 0x00
    4119168 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    16:03:51 #10 Text 0 File Burncd.cpp, Line 4343
    Caching options: cache CDRom or Network-No, small files-Yes (<32KB)

    16:03:51 #11 Phase 24 File ExtendedProgress.cpp, Line 537
    Caching of files started

    16:03:53 #12 Text 0 File Burncd.cpp, Line 4462
    Cache writing successful.

    16:03:53 #13 Phase 25 File ExtendedProgress.cpp, Line 537
    Caching of files completed

    16:03:53 #14 Phase 32 File ExtendedProgress.cpp, Line 537
    Simulation started at 4x (5540 KB/s)

    16:03:53 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2726
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    16:03:53 #16 Text 0 File DVDPlusDualLayer.cpp, Line 580
    Disc finalized, LBA total Image size: 4119168 (8045MB), Last LBA L0: 2059583 (4022MB)

    16:03:53 #17 Text 0 File DVDPlusDualLayer.cpp, Line 756
    L0 Data Zone Capacity not set.
    Max LBA L0 2092895 (1FEF5Fh, 4087MB), next writable address 0 (0h, 0MB)

    16:03:53 #18 CDR -1205 File DVDPlusDualLayer.cpp, Line 772
    Burning Layer 1

    16:03:53 #19 Text 0 File DVDPlusDualLayer.cpp, Line 782
    Start writing layer 1 at address 0 (0h)
    Recording mode: unknown Recording Mode

    16:03:53 #20 Text 0 File DVDR.cpp, Line 3262
    Recording mode: Sequential Recording Mode

    16:03:53 #21 Text 0 File DVDR.cpp, Line 3416
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    16:03:53 #22 Text 0 File Cdrdrv.cpp, Line 10162
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.1x (6), Extended Part Version: 3.0 (48)
    Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
    Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
    Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: FCC8FF h
    End Physical Sector Number in Layer 0: 22EF5F h (LBN: 1FEF5F h, 4087 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 1.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: - - - - - - -
    Class: 0, Extended part version: 48
    Start PSN of the Extra Border Zone: 2FE10 h
    Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
    Media Specific [16..783]:
    00 10 00 00 00 00 00 00 - 00 00 00 30 00 00 00 00 ...........0....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    15 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    01 02 91 FD D1 0A 60 00 - 02 00 00 00 33 70 00 00 ......`.....3p..
    03 43 4D 43 20 4D 41 00 - 04 47 2E 20 41 44 34 00 .CMC.MA..G..AD4.
    05 00 00 00 00 00 00 00 - 06 0B 17 3C 42 2D 26 00 ...........<B-&.
    07 50 20 2A 0D BB B5 00 - 08 88 80 00 00 44 40 00 .P.*.........D@.
    09 00 00 00 00 00 00 00 - 0A 10 1D 38 46 31 28 0F ...........8F1(.
    0B 50 26 2A 08 AB B5 00 - 0C 00 00 00 00 00 00 00 .P&*............
    0D 00 00 00 00 00 00 00 - 0E 10 2F 3C 42 28 28 00 ........../<B((.
    0F 50 24 2E 10 BB B5 00 - 10 88 80 00 00 44 40 00 .P$..........D@.
    11 00 00 00 00 00 00 00 - 12 0D 35 32 37 28 25 0F ..........527(%.
    13 50 26 30 15 AB B5 00 - 14 00 00 00 00 00 00 00 .P&0............
    15 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    16:03:53 #23 Text 0 File DVDR.cpp, Line 3552
    Reserved Track size: 4119168 (3EDA80h, 8045MB) -> return code 0

    16:03:53 #24 Text 0 File ThreadedTransfer.cpp, Line 268
    Pipe memory size 83836800

    16:17:09 #25 CDR -1206 File DVDPlusDualLayer.cpp, Line 2113
    Burning Layer 2

    16:17:09 #26 Text 0 File DVDPlusDualLayer.cpp, Line 2122
    Perform layer 1 to 2 jump before writing at address 2092896 (1FEF60h)

    16:17:19 #27 SCSI -1119 File SCSIInterface.cpp, Line 623
    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0xa86baf00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x03
    CDB Data: 0x2A 0x00 0x00 0x20 0x32 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x09 0x03

    16:17:19 #28 CDR -1119 File Writer.cpp, Line 306
    Track following error
    HL-DT-ST DVD-RAM GSA-H55N (H:0 T:0)

    16:17:19 #29 Phase 181 File ExtendedProgress.cpp, Line 537
    Writing lead-out...

    16:17:19 #30 Text 0 File DVDR.cpp, Line 3818
    EndDAO: Last written address was 2110111 (20329Fh)Estimated time for completing DVD-R DL disc: 13min 24sec

    16:17:20 #31 Phase 34 File ExtendedProgress.cpp, Line 537
    Simulation failed at 4x (5540 KB/s)
     
    vmlinuz, Dec 26, 2008
    #1
  2. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Could be the disc is not compatible with the drive's firmware. Try updating it. The latest is 1.06
    Here's LG's site - link - just type in the model #GSA-H55N under search and it will bring up a link.

    Free up some memory too - close as many unneeded programs as possible - 89% of your memory is in use in this log.

    You can also try burning at 2.4x.

    All still fail then try another brand like Verbatim which is the best dual layer media.
     
    binkie7, Dec 26, 2008
    #2
  3. vmlinuz

    vmlinuz Member

    Joined:
    Dec 26, 2008
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    vmlinuz, Dec 29, 2008
    #3
  4. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Hmmm don't know if they have one for linux.

    Have a windows pc you can pop the drive in to update the firmware?

    I'd still give new discs a try too - the ones you have are mad by CMC and they are usually subpar.
     
    binkie7, Dec 29, 2008
    #4
  5. bryston

    bryston Regular member

    Joined:
    Oct 28, 2008
    Messages:
    878
    Likes Received:
    0
    Trophy Points:
    26
    Hi,

    can you use Imgburn, the best burning engine out there, and especially for dual layer discs.


    Jo
     
    bryston, Dec 29, 2008
    #5
  6. vmlinuz

    vmlinuz Member

    Joined:
    Dec 26, 2008
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    As i see in description, ImgBurn is for mu$tdie only, I need a linux one.
     
    vmlinuz, Dec 30, 2008
    #6
  7. vmlinuz

    vmlinuz Member

    Joined:
    Dec 26, 2008
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    I acknowledged about wine/cxoffice under linuz, but i unsure whether this works best with hardware. I prefer native linux apps.
     
    vmlinuz, Dec 30, 2008
    #7
  8. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Well I think your best bet is switch to Verbatim. Verbatim's are pretty much supported by most drives firmware well at least the 4x and under dual layer discs. So pick up some of those - w/o the firmware update I wouldn't recommend buying anything above 4x for dual layer and this drive.
     
    binkie7, Dec 30, 2008
    #8

Share This Page