Discussion in 'Xbox - Hardware boot discussion' started by ken2620, Mar 10, 2006.
I plug the crossover cable in the xbox an my pc. it says connected. Now do i us flashxp
no, you have to click network flash then you have to go to internet explorer and type in ur ip and it will take you to an x3 bios uplaod screen then just select the file you want to upload and hit upload
ps you can try to use flash but i dont know of it working and this is alot easier
thanks Guys I works now to tackle dashboard. any hints?
so what did you do to get it working, for the dash just use flax fxp to ftp one over ftp it to the c:/ and then change the boot order on ur chip so it wil boot the one from the drive you want
i had to change the ip on my pc. the xb had 192.168.0.99 I changed the pc to 192.168.0.1. you said i can use flash xp to add a dashboard. can i im you.
OK os i d/l Avalaunch.0.49.2-MultiGameDisk an you say to link xb to pc and open flash xp and move over the whole floder to the C drive on the xbox side. Start live config and make the c drive start first?
yes, you are getting there. set a path to avalaunch.
yep thats it after that you should be good, then comes the fun stuff lik emu's
I just installed a xecuter3 ce and I do not know how to get the bios.bin file. I need help asap. I have the blue screen BlashBIOS 3.0.3 Please respond asap
hey i can send it to you i think i still have it just pm me
Well, I network flashed about 4 different bios files and when I do that My box will come on and turn right off. unless I hit the eject and power button to reflash it again. I am at a sticking point.
if it comes on right then whats the problem
you need to flash the x3 3294 1MB bios. Then install dashboard.
I'm have the same problem. I loaded 3294 also, and unless I go to reflash it, my box just turns itself on and then off right away over and over again.
make sure you flsh the right banks
I'm flashing with 1 and 2 on, and 3 and 4 off like the directions say.
try with them all off and see what you get this is what i had to do
It won't flash at all now. It keep halting the flash process.
that means you have the chip on protect,
Separate names with a comma.