1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Xecuter3 HELP!!! PLZ

Discussion in 'Xbox - Hardware boot discussion' started by djlintos, Feb 16, 2005.

  1. djlintos

    djlintos Member

    Feb 16, 2005
    Likes Received:
    Trophy Points:
    i havfe just bought a modded xbox with an installed Xecuter3 from ebay.. it has arived with the thing on the front.. with the banks and stuff... but when i turn the xbox on nothing happens, the xbox plays just like it doenst have the chip and hte chip doenst change colour or anything... what should i do??? im a total xbox n0000000b bye the way lol plz can someone help me!
  2. mickrick

    mickrick Member

    Nov 21, 2002
    Likes Received:
    Trophy Points:
    Chances are that the mod is ok but the Executer has become useated from the pinheader. The best thing to do is open the xbox and try reseating the Executer yourself.

    First you need to determine what xbox version you have, you can do this by following this guide:


    Next, you need to reseat the Executer. Just follow the instructions in this guide and you should be safe enough:

    v1.0 - 1.5 http://www.teamxecuter.com/x3/tutorials/x3pin1015.htm

    v1.6 http://www.teamxecuter.com/x3/tutorials/x3pin16.htm

    Just ignore everything else up to the part about fitting the Executer onto the pin header. If this doesn't work, work your way through the tutorial checking that all connections are made exactly as described.

    If all else fails, or you do not feel confident doing this yourself, leave your xbox with a reputable mod engineer (you'll find links on any xbox mod site) and have them do it for you.

    You may find that it's the reason it was being sold on ebay in the first place.

    Good luck, and let me know how you get on.
    Last edited: Feb 17, 2005

Share This Page