version: 6.0.0.9 (Nero Express) Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US06 - HA 1 TA 0 - 6.0.0.9 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <TSSTcorp DVD-ROM TS-H352A>Version: TS03 - HA 1 TA 1 - 6.0.0.9 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 1 ID 1 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 370MB (379596kB) Memory in use : 27 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.8.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 12:08:16 #1 Text 0 File Reader.cpp, Line 118 Reader running 12:08:16 #2 Text 0 File Writer.cpp, Line 127 Writer Image Recorder running 12:08:16 #3 Text 0 File DVDCopy.cpp, Line 173 Max -1 tracks of 1 allowed to copy 1: 0 - 1514512 = 1514512, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 12:08:16 #4 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 12:08:16 #5 Text 0 File DlgWaitCD.cpp, Line 228 Last possible write address on media: 2147483646 (477218:35.21) Last address to be written: 1514511 (336:33.36) 12:08:16 #6 Text 0 File DlgWaitCD.cpp, Line 233 Write in overburning mode: FALSE 12:08:16 #7 Text 0 File DlgWaitCD.cpp, Line 1722 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 12:08:16 #8 Text 0 File ThreadedTransferInterface.cpp, Line 768 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1514512 (1514512) = #1514512/336:33.37 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1514512 blocks [ Image Recorder ] -------------------------------------------------------------- 12:08:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 937 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 3102027776, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1514512 | lead-out | 1 | 0x00 | 0x41 12:08:16 #10 Phase 120 File dlgbrnst.cpp, Line 1843 Creating the image for burning 12:08:16 #11 Text 0 File ThreadedTransferInterface.cpp, Line 2130 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:17:47 #12 Text 0 File WriterStatus.cpp, Line 113 < Image Recorder > start writing Lead-Out at LBA 1514512 (171C10h), lenght 0 blocks 12:17:47 #13 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 12:17:48 #14 Phase 121 File dlgbrnst.cpp, Line 1843 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 12:18:02 #1 Text 0 File Reader.cpp, Line 118 Reader running 12:18:02 #2 Text 0 File Writer.cpp, Line 127 Writer TSSTcorp CD/DVDW TS-H552U running 12:18:04 #3 IMAGEGEN -10 File ImageGen.cpp, Line 363 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x00 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = -1192939520 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0) 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=336:33.37 ( 1514512) MTYP: Mediumtype = DVD (old format) (0x1C) 12:18:05 #4 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 12:18:06 #5 Text 0 File DlgWaitCD.cpp, Line 228 Last possible write address on media: 2298495 (510:46.45) Last address to be written: 1514511 (336:33.36) 12:18:06 #6 Text 0 File DlgWaitCD.cpp, Line 233 Write in overburning mode: FALSE 12:18:06 #7 Text 0 File DlgWaitCD.cpp, Line 1722 Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 12:18:06 #8 Text 0 File ThreadedTransferInterface.cpp, Line 768 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 1514512 (1514512) = #1514512/336:33.37 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1514512 blocks [TSSTcorp CD/DVDW TS-H552U] -------------------------------------------------------------- 12:18:06 #9 Text 0 File ThreadedTransferInterface.cpp, Line 937 Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 3102027776, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1514512 | lead-out | 1 | 0x00 | 0x41 12:18:15 #10 Phase 32 File dlgbrnst.cpp, Line 1843 Simulation started at 6x (8,280 KB/s) 12:18:16 #11 Text 0 File ThreadedTransferInterface.cpp, Line 2130 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:18:16 #12 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 6:22,811 (382811ms) -> OK 12:18:17 #13 Text 0 File DVDR.cpp, Line 1485 Recording mode: Sequential Recording Mode 12:18:17 #14 Text 0 File Mmc.cpp, Line 18724 Set BUFE: supported -> ON 12:18:17 #15 Text 0 File DVDR.cpp, Line 1600 Start write address at LBA 0 DVD high compatibility mode: Yes 12:18:17 #16 Text 0 File Cdrdrv.cpp, Line 7906 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 30 01 02 04 06 00 00 00 - 08 00 00 00 00 00 00 00 0............... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:18:31 #17 Text 0 File Writer.cpp, Line 318 12:18:31.421 - TSSTcorp CD/DVDW TS-H552U : Queue again later (Intervall : 7msec) 12:24:55 #18 Text 0 File WriterStatus.cpp, Line 113 <TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 1514512 (171C10h), lenght 0 blocks 12:24:55 #19 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 12:25:12 #20 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 12:25:12 #21 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 12:25:12 #22 Phase 33 File dlgbrnst.cpp, Line 1843 Simulation completed successfully at 6x (8,280 KB/s) 12:25:13 #23 Phase 36 File dlgbrnst.cpp, Line 1843 Burn process started at 6x (8,280 KB/s) 12:25:14 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2130 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:25:14 #25 CDR -1066 File ThreadedTransferInterface.cpp, Line 1508 Invalid field in command 12:25:14 #26 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1508 Invalid track info 12:25:14 #27 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 12:25:14 #28 Phase 38 File dlgbrnst.cpp, Line 1843 Burn process failed at 6x (8,280 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46 File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 23:59:44 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hiya. Nero is prehistoric, or older!. Your burner isn't being correctly recognised. Update to latest, 6.6.0.16 I think us06 is the latest firmware revision for your burner. Other than that, try 4x. And post another log..
LOL, here i am!! sorry, was on way to a meeting so just sent a quick reply before.. - yup, that's neolithic, update for 6.6.0.16 is here - http://www.nero.com/en/nero-up.php - yup, firmware is up to date -http://forum.rpc1.org/dl_firmware.php?download_id=2011 - yup, that's neolithic, your drive isn't being detected correctly - i think that's usually indicative of a media issue - maybe try 4x try updating Nero and see if that helps...
@lili - have had to request these 2 be closed - http://forums.afterdawn.com/thread_view.cfm/225353 http://forums.afterdawn.com/thread_view.cfm/225188 - it's against forum rules and is tricky for me/others to track, and must be tricky for you to track the replies.. @y2dorean - have responded to your thread here - http://forums.afterdawn.com/thread_view.cfm/225597 but have had to request these 2 be closed as they're multiposts - http://forums.afterdawn.com/thread_view.cfm/225590 http://forums.afterdawn.com/thread_view.cfm/225469
creaky ive updated nero, tried burning at 4x still no joy,wat am i doing wrong,were i took it to be wiped they said they burned 2 discs fine..........please please help....... ta lili, heres another log (sorry)
Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US06 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TSSTcorp DVD-ROM TS-H352A>Version: TS03 - HA 1 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-H552U D: CDRom0 TSSTcorp DVD-ROM TS-H352A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 289MB (296228kB) Memory in use : 43 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.8.2005 DVD-Copy on the fly 20:38:08 #1 Text 0 File Reader.cpp, Line 127 Reader running 20:38:08 #2 Text 0 File Writer.cpp, Line 122 Writer TSSTcorp CD/DVDW TS-H552U running 20:38:08 #3 Text 0 File DVDCopy.cpp, Line 293 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x04 Start 0 Len 1900080 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 20:38:08 #4 Text 0 File DVDCopy.cpp, Line 406 Max -1 tracks of 1 allowed to copy 1: 0 - 1900080 = 1900080, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 20:38:08 #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 20:38:08 #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1900079 (422:14.29, 3711MB) 20:38:08 #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 20:38:08 #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 20:38:08 #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 20:38:08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1900080 (1900080) = #1900080/422:14.30 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1900080 blocks [TSSTcorp CD/DVDW TS-H552U] -------------------------------------------------------------- 20:38:08 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3891363840, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1900080 | lead-out | 1 | 0x41 | 0x00 20:38:08 #12 Phase 32 File dlgbrnst.cpp, Line 1832 Simulation started at 4x (5,540 KB/s) 20:38:08 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 20:38:08 #14 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 20:38:08 #15 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Super Link -> ON 20:38:08 #16 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 20:38:08 #17 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 20:38:34 #18 Text 0 File Cdrdrv.cpp, Line 1286 20:38:34.218 - TSSTcorp CD/DVDW TS-H552U\H1 T0 : Queue again later 20:51:35 #19 Text 0 File WriterStatus.cpp, Line 116 <TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 1900080 (1CFE30h), lenght 0 blocks 20:51:35 #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 20:51:35 #21 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 1900079 20:51:57 #22 Phase 33 File dlgbrnst.cpp, Line 1832 Simulation completed successfully at 4x (5,540 KB/s) 20:51:58 #23 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 20:51:58 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 20:51:58 #25 CDR -1066 File ThreadedTransferInterface.cpp, Line 1741 Invalid field in command 20:51:58 #26 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1741 Invalid track info 20:51:58 #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46 File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 23:59:44 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Can't see anything wrong there, all I as try some different discs, such as in my , ie verbatim [bold]datalifeplus[/bold]... Actually, before that, its worth checking if those are real g05 disks as there are fakes about. Do a google search for 'dvd identifier' - download that and use it to 'identify' one of those discs and paste info here....
hiya creek,heres my identifier,,,i think it coud be the drive,but it say [22:21:18] DVD Identifier V4.0.1 [22:21:18] Initializing ASPI/SPTI Drive Interface [22:21:18] SPTI Drive Interface Successfully Initialized [22:21:18] 1 Supported Drive Found (Out Of 2 Available Drives) [22:21:18] Manufacturer Database [10-APR-05@532$80] Loaded From File : (@532$80) Entries Found [22:21:39] This Version Of 'DVD Identifier' Is Up-To-Date [22:21:39] The Manufacturer Database Is Up-To-Date [22:22:00] DVD-R/-RW Medium Detected. Starting Identification... [22:22:00] ** Initiating LPP Retrieval [22:22:02] LPP Read Completed Without Errors [22:22:02] Disc Identification Completed Successfully s in properties its working fine............
@pulsar - well spotted that man. i was replying by handheld again and it's a bit crap for big logfiles.. @lili - need more info about the discs, just in case they are Faked g05 discs. keep at the dvd identifier 'til you get something that resembles info re g05 and paste here... One way around pinpointing this problem may to be to try a different copying method. instead of the Nero disk copy method, try copy/pasting the source disc to somewhere on hard drive (via windows explorer). just copy the whole video_ts folder to hard drive, then write to disc in Nero by opening a new 'dvd-video' complilation, then selecting that video_ts folder. Not sure how much mileage this will gain but it's worth a try...
hi creek thanx 4 reply, ive tried another mway of burning an it still says invalid track info,ive sent another log, Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US06 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TSSTcorp DVD-ROM TS-H352A>Version: TS03 - HA 1 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-H552U D: CDRom0 TSSTcorp DVD-ROM TS-H352A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 241MB (247700kB) Memory in use : 52 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2005 UDF/ISO compilation 08:37:50 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 08:37:50 #2 Text 0 File DVDVideoCompilation.cpp, Line 552 Content of VIDEO_TS.IFO has been modified 08:37:50 #3 Text 0 File DVDVideoCompilation.cpp, Line 552 Content of VIDEO_TS.BUP has been modified 08:37:50 #4 Text 0 File DVDVideoCompilation.cpp, Line 552 Content of VTS_01_0.IFO has been modified 08:37:50 #5 Text 0 File DVDVideoCompilation.cpp, Line 552 Content of VTS_01_0.BUP has been modified 08:37:50 #6 Phase 113 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed 08:37:50 #7 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 08:37:50 #8 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 08:37:50 #9 Text 0 File Reader.cpp, Line 127 Reader running 08:37:50 #10 Text 0 File Writer.cpp, Line 122 Writer TSSTcorp CD/DVDW TS-H552U running 08:37:50 #11 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 08:37:50 #12 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 08:37:50 #13 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 08:37:50 #14 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1899503 (422:06.53, 3709MB) 08:37:50 #15 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 08:37:51 #16 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 08:37:51 #17 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 08:37:51 #18 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1899504 (1899504) = #1899504/422:6.54 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1899504 blocks [TSSTcorp CD/DVDW TS-H552U] -------------------------------------------------------------- 08:37:51 #19 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3890184192, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1899504 | lead-out | 1 | 0x41 | 0x00 08:37:51 #20 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 08:37:51 #21 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 08:37:51 #22 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 08:37:51 #23 Phase 32 File dlgbrnst.cpp, Line 1832 Simulation started at 4x (5,540 KB/s) 08:37:53 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 08:37:53 #25 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 08:37:53 #26 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Super Link -> ON 08:37:53 #27 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 08:37:53 #28 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 08:38:02 #29 Text 0 File Cdrdrv.cpp, Line 1286 08:38:02.468 - TSSTcorp CD/DVDW TS-H552U\H1 T0 : Queue again later 08:49:51 #30 Text 0 File WriterStatus.cpp, Line 116 <TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 1899504 (1CFBF0h), lenght 0 blocks 08:49:51 #31 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 08:49:51 #32 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 1899503 08:50:13 #33 Phase 33 File dlgbrnst.cpp, Line 1832 Simulation completed successfully at 4x (5,540 KB/s) 08:50:14 #34 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 08:50:14 #35 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 08:50:14 #36 CDR -1066 File ThreadedTransferInterface.cpp, Line 1741 Invalid field in command 08:50:14 #37 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1741 Invalid track info 08:50:14 #38 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46 File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 23:59:44 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
thanx creek, does this mean anything- from dvd identifier warning ** INFO : Drive = TSSTcorp CD/DVDW TS-H552U [FW US06] ** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW ** INFO : Write Capabilities = DVD-R DVD-RW ** INFO : Disc = [DVD-R:RITEKG05] ** INFO : Reference Speed : 1x DVD = 1385 kBps ** INFO : An Writeable Disc Is Recommended For Accurate Results ** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below ** INFO : GET PERFORMANCE Write Speed Descriptor(s) Descriptor #1 = 11080 kBps ( 8.00x) - [Pure CAV] Descriptor #2 = 8310 kBps ( 6.00x) - [Pure CAV] Descriptor #3 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV] Descriptor #4 = 2770 kBps ( 2.00x) - [CLV/Non-Pure CAV] ** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command] ** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported Descriptor #1 = 11080 kBps ( 8.00x) - [CLV/Non-Pure CAV] Descriptor #2 = 8310 kBps ( 6.00x) - [CLV/Non-Pure CAV] Descriptor #3 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV] Descriptor #4 = 2770 kBps ( 2.00x) - [CLV/Non-Pure CAV] thanx again, lili
@ lili hi sorry to hear you having so much trouble, but you got the man on the job @creaky hi yep looks like it's the real deal
hiy creek is there anything i can do,about that warning thing on the last log i sent u.please help im going nuttsss.
@lili - hiya. i can't see anything wrong in your logfile. the 'invalid command' & 'Invalid track info' are usually indicative of a hardware problem or a media problem... however there is one thing i've noticed in your logfile different to any of mine - - i don't use this mode, it looks like when you're starting a new compilation, you're choosing compilation type of 'DVD-ROM (UDF/ISO)' mode instead of 'DVD-Video' mode. try choosing standard 'DVD-Video' mode and report back...
