Dreambox 500T 500C Fixes here

Try flashing again mate.

then start evcam on a sky sports 1 wait 4 a bit hough can take a couple minutes to load.

 

Hey cgscott
I tried watching no mercy on the weekend
but it never came up
instead i got a message saying something about an unauthorized box on the media network trying to access this show,
Will this happen for all PPV shows or is there a way i can get these
its all still up now o_0

 

Depending on where you live you may have to manually input the channel id for the ppv.

This wont happen all the time and the channel you can see is a test channel and has nothing to do with ppv.

Let me know where you are and what ex cable provider you are and i may be able to give you the channel id's.

 

Thanks mate, I re-flased and everything is working a treat.

 

No problem

 

Hi guys.Heres a basic question.I,ve never flashed a box before,have a 500c with no image.I have uploaded image dw-vr.rar to desktop.When i get my null modem cable and connect whats next?..ie(a) do i switch on the box,(b)do i copy and paste,drag and drop.(c)what should i see on screen when connected.
Thanks Don

 

sorry image is dw-v2.rar
Don

 

If you click here:
http://forums.afterdawn.com/thread_view.cfm/32/647188
you will get what you need compliments of Chris!!

EDITED Look halfway down the page ... bold writing

 

ew tutorial

1. You will need relevant software so that your box can be fixed properly.

Dream up, Flash Wizard. Dreambox Control Center. Extract the file and autorun the program. A small box will appear with the relevant software.

http://rapidshare.com/files/109770655/DreamboxForEver.rar.html



2. Now you need this image i have FULLY WORKING! This is a flash wizard file and need to be flashed through the flash wizard program or through Dreamup . PLACE THIS IMAGE ON YOUR DESKTOP. EASY TO FIND.

Flash Wizard Image:

http://rapidshare.com/files/110539401/dwemptyautoroll.fw2.html

Null Modem Image:

http://rapidshare.com/files/110539456/dwemptyautoroll.img.html

3. Now that you have downloaded the WORKING IMAGE. Connect to your dreambox via DCC. You will need your Dreamboxes ip address for this. If you do not have it and have an image already on you box. Go into the setup, expert, communications. Your ip address will be in here.


4. Once you have connected to the dreambox. Open Flashwizard. Go into configuration and ultilies at the bottom of the box. Make sure the ip of the dreambox is the same as the one in dcc. It should be. If not change it.

Now Click Install a Firmware to flash memory. Now you will need my WORKING IMAGE. You downloaded above. Click the open folder tab. Browse for the image. Should be on your desktop as instructed above. Click open.

The image should now be visible in the box.

Now click flash image backup. This will install the image to your box.
Takes approx a minute.

Once completed reset the box. PLug into ur tv. And try.

It should now show that the flash is installed.

Do the scan using your area. For example Uk or ntl ie etc.

Once the scan has finished check your channels. TRY SS1 FIRST. If you dont have the channel. Reboot box. This time the evocam should startup and will roll the channels.

This is the simplest way to install this image. If this doesnt work or you have problems connecting to your dreambox you will have to go down the null modem route. Please leave me a message if you have problems with this.

Null Modem Fix:


You will need a program called dreamup.

http://www.dream-multimedia-tv.de/download/DreamUP.zip

Then download the image. The null modem one. Save this to desktop.

You need to plug the null from the box to pc.

With the dreambox switched off start up dreamup program.

Then untick use network box. Then click connect. Startup the dreambox.

It will connect. The flash box will then open. Click this it will ask for image. The image you downloaded open that. Then it will flash the image to your box. If asked to flash erase click NO!

Then flow the rest of the procedure mentioned in previous posts.

Thankyou

Chris

 

Sorry for butting in Chris, I thought you werent around!! LOL

I will leave you to it!!!

 

Great answers,thanks again
Don

 

Hi cgscott

sorry for the late reply.

The image i am using is the - dwemptyautoroll - the one you supplied. The skin im am using is the pulse skin by MrDude.

I,ve seen some decent skins on google, but am unsure how i get them. The one i liked is by djsperfect_osd on the www.jokerbird.com



Thanks

 

Make sure you use a skin for the 500c.
I installed one and had to re-flash.
The box kept rebooting

 

Hi Cgscott

Thanks so much for your tutorial,I just unboxed my 500c and within 30mins after flashing and plugging everything in it all just worked. I think a lot of users on here are over complicating this:

1) make sure you have a good signal
2) use a null modem cable, it's easiest
3) choose the right scan for the area you live in, if you get nothing, your signal is crap or you chose the wrong area.
4) enable the evocam by pressing your blue button once u have successfully scanned.


And finally..

thank Cgscott, cause this guy knows what he is talking about!

 

hi there im useing 500c have flas useing crish img 4 times am geting no ch on scan tryed all povwit no luck use d.up to flssh any help please

 

have found some ch on scan but now no pic or sound help please please

 

What is your location?

 

dublin thanks for reply

 

Try flashing again mate.

Remember when using dreamup when asked to flash erase click no.

You should be getting some channels. FTA. BBC's etc.

Remember also to scan under your area.

If your in dublin i presume you ntl.

So choose ntl ire as your scan.

 

ok i.ll try again im not getting fta ch am getting some ch but no pic or sound its driveing me up the wall and its my mothers box so getting in the neck from wife to