Eurovox flashing step by step.

Please have a look at page 1 of this thread, if you are still having problems, post back.

 

Hi scouser
Its like my Pc is not allowing the eurovox to send down the cable.it was okay with The Box?

 

Are you using a null modem cable and USB adapter?

 

No from the com port

 

I went to Maplins and bought Null Modem cable L718T but still same response.Could comething on my pc settings stopping the download to eurovox?

 

Have you configured your port settings in Com/Ports properties as explained on page 1.

 

Hi yes i did but it just keep saying waiting reaponse,was on another site & someone said something about active sync ring any bells?

 

Hello Chaps!

Currently pulling my hair out..!
Managed to flash firmware. However, only getting 11 channels...sfter power scan, etc. ?

What do I do next, please?

I've become really frustrated\11

Any advice greatly appreciated.

 

Sounds like it needs jtaging as for active sync= no never heard of it, sorry.

where abouts are you what channels are you getting and are they the free to air channels.

 

Im in Wimbledon. I entered my symbolrate as 6.952.
The channels are 9 (sorry! not 11):
Animal Planet
CNN International
Disc Realtime
Discovery Channel
Discovery Ho
Discovery Kn
Discovery Science
Discovery Tu
Sony Ent TV

I dont think they are the free to air channels...

 

Follow this guide again but before scanning take any splitters out of your feed and connect it directly to your box.

http://forums.afterdawn.com/thread_view.cfm/674371#4103005

 

The problem is with my computer,just brought eurovox to mates house and it scanned in no problem.

 

What OP system do you operate on your PC, is it Vista, it would be helpful to others if you could identify the problem with your PC that would not let you flash, whether it be OP system or any antivirus ware etc.

 

Good evening Malci! hope your well

 

I'll let you know asap as a friend is having alook at my PC so hopefully he'll find out.

 

Good stuff, as said it would be very helpful, hope he finds a solution

Hi Hiteck, sorry I missed it last night, talk soon.

 

Wondered If anyone can help me. Iam from the Glasgow area and I was having prolems with the EPG. As the clocks went back last week, the time on the Eurovox was an hour ahead, but by going to tv settings to change the time, the correct time never stayed the same. So thinking I was so smart, I scanned the channels thinking It would solve my problem. Well It did, but most of the channels are missing, saying No signal. I just flashed my box again using the same fireware as a few months ago (http://www.mediafire.com/?6xfjjdnmzge/), but didnt work. Really wish I hadnt done a power scan as my channels were there. Usually clued up on these type of problems but I have came to a brick wall and wondered if anyone else is having the same problem and could point me in the right direction. Thanks.

 

al the firmware you need is in eamos library under my pic,try using the one you previously used(as you havn't stated what eurovox you have),make sure you scan using the right symbol rate for your area,as for the time try this courtesy of sc0ucer 1. Unplug EV then plug it back in.
2. Turn on and immediately press menu.
3. Go to config, then time settings.
4. Set correct time using GMT setting.
5. Turn GMT off.
7. Press blue button to save and exit.

Note if you unplug EV again you will have to do above again, so leave in standby at night

 

Evening karl, Don't mind if I just come in there a sec. there is no need to do that in the UK, all you need to do is go to Time Settings and put GMT-0 with arrow key > < blue button to save and exit, then Update Channels in User Installation to get the EPG sorted straight after. Do the same come next March GMT-1 and ditto.

 

Hope you don't mind me adding my bit: All I did was go to Time settings, changed to GMT-0, and saved/exited; I didn't do Channel update, etc, and the EPG was fine; Also I had a power failure for 8 hours in my area 2 nights ago, and the EV settings were all preserved on restarting.