that should have been 18/04/08 for the eurovox max 2.1 ithink tried the 2804 but thats only for max v
Have a look here http://forums.afterdawn.com/thread_view.cfm/674371 and you will see a link to drivers and a Comm port guide.
Thats it alright. Have you tried a reflash? Also check it from the RF loopout socket under the cable in socket and see what you get. The 2007 tuner isnt the best.
did all that been searching the threads for other ideas couldnt find any that why i joined to ask the questions
I could say try a Jtag but it looks like a tuner fault. You could open the box and check for any dry solder joints where the RF socket joins the tuner.
bought a jtag not sure how to use it do i connect it to the computer in the normal way with a nine pin or through the j tag itself
You connect through the jtag itself, but as I said I dont think its a TSOP issue, but may be a tuner issue. But if you want instruction on how to jtag I can give them to you. Is your box a clone or genuine?
genuine have the connections done but need to get 21 pin connecter have software with instructions will give it a go was worth a tenner to chckit out if it doesnt work i know the box is kaput still got my monies worth though thanks for the help
Anyone help.I have loaded firmware on and connected my box to tv.Can anyone tell me where there is an idiots guide to install channels.There is 4 zeros and no signal to the screen and when I messed about with the control buttons it mentioned transponder.
karljd, I loaded up the correct firmware MaxV_Kuro3_18_04_08. but cannot find an idiots guide for when you connect to a t.v. i.e. what buttons do you press to locate the channels.I checked the help link but I can only see how to load firmware.Any help would be appreciated.thank you.
------------------------------------------------------ Use a scart lead and turn TV to AV Channel normally the next channel down after channel 1