Eurovox flashing step by step.

Are you just using a null modem cable or a USB adapter aswell? also in device manager if you are using a USB adapter is it showing when you plug it in.

If your using just a null modem cable what is com number does it show under in device manager for serial ports, you will see it when you click on the + at the side of com/ports.

Edit.Very well Malachi LOL the calm before the storm I think. speak in a bit.

 

I would like to say thank you to you for taking the time to do that, and the same best wishes for the festive season, but can I just say my name is not Malachi honestly, I am aware that is a reasonably popular name - iterpretation over in Ireland, but it is no bother.


EDIT- Afternoon Hiteck mate, hope you are well, I am only here for half hour or so, its panto time - he's behind you and all that for the young ones.

 

Great work,everything went perfectly.

 

Not sure if this has been covered here but maybe someone can help.

I have a Eurovox Max V and have gone through the firmware upgrading process and searched for channels between 290.00 & 420.00MHZ (6.887 Symb Rate). Previously it was coming up with 13 channels from the scan giving me c.140 tv stations and c.30 radio.

Since the new firmware is installed I am only getting 5 channels from the scan and only c.40 tv stns and 15 radio. I have tried a Deep Scan but to no avail.

Any help is greatly appreciated. Thanks

 

BTW I'm in Dublin on N*L. Thx

 

killiano

You should of saved your CDF before flashing, Where about's are you.

Edit: you just answered

Do a factory default then download this to your box >> http://www.4shared.com/file/68995374/f3d1ea99/sc0user_NTHELL_Dub_081008.html

 

In Dublin on N*L.

Did same before without saving CDF and wasn't a problem.

 

Answered you above, I edited my post look up.

 

Will do. Thanks for the help and speedy response

 

No problem good luck.

 

@ HiTeck What's the form on asking you Senior guys to look at one of my unanswered posts on another thread?
http://forums.afterdawn.com/thread_view.cfm/730602

If I have broken any rules here; mea culpa - ignorance is the reason

 

How are Hitech and Malci this evening? Any news on a fix for the TX, my 5 year old is driving me bonkers for D telly, is it possible to manually input codes on the TX, cheers guys.....hero's

 

Hi guys.

Hopefully someone can help me. I have a V max, I installed the latest frimware last nite.(UFL_MAX_V_Autosort_5_12_08) All was working fine. Then this morning the message on the screen was changing between 'Service Unknown' and 'No Signal'. I have really hit a brick wall this time.

Cheers

 

can any1 help im tryin to flash my max-v 2008 but when i connect it to my pc all it says is waitin for response. and the display on my box just shows the time when connected. the cables i have are null modem serial connection lead and a usb serial converter that converts usb to rs-232 serial interface, also it connects to com port 9 and the firmware only lets me choose from 1 to 4 com ports

 

Dont know mate never messed with them, I think if there anything like modems then no they wont work, contact VM and ask them .

 

Dont know of a fix yet you will have to keep an eye in here,

http://forums.afterdawn.com/thread_view.cfm/722659

Manual input is the only way to go for now.

 

Try your subbed box to rule out any CC problems.

 

Read this on page 1, you need configure your ports >> http://forums.afterdawn.com/thread_view.cfm/674371#4151717 all instructions there.

 

OK thanks for the response
I might give the phonecall to VM a miss ;-/
I'll wait till I get there and if my second VM box does fail I'll just get another EV to replace the 2nd box
(Just find the VM boxes handy for things like catch up TV and have got used to having my genuine one which I will keep and a second unsubscribed VM box) Guess I'll have to get out more
Ah! well! there's always the Champions League
CYA HiTeck and thanks again

 

No problem you mite get a reply yet who knows, BTW I was joking about calling them