Hello I understand that I am new to the discussion board but I have a question to ask. I have been using DVD Shrink with DVD Decrypter for the last 2 years and have not had a problem with it till now. I have tried everything I can think of to repair the problem. But I am still getting a IO error when I use decrypter, Image burn and also Rip it for me. I have attached a log of the issue maybe some one can tell me how to fix the problem I am having. I have been using sony dvd's. I tried Verbatumn but they are causing pixling on the finished video.... The write speed below is on a DVD rewrittable as I was tired of loosing good dvd's trying to figure out the issue. Thank you in advance. I/O Error! Device: [0:1:0] HL-DT-ST DVD+-RW GSA-H21N A105 (E (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 07 0F E0 00 00 20 00 Interpretation: Write (10) – Sectors: 462816 – 462847 Sense Area: 70 00 05 00 00 00 00 0E 00 00 00 00 21 02 00 00 00 00 Interpretaion: Invalid Address For Write. Log: I 12:03:04 ImgBurn Version 2.3.2.0 started! I 12:03:04 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 12:03:04 Total Physical Memory: 2,095,196 KB - Available: 1,547,844 KB I 12:03:04 Initialising SPTI... I 12:03:04 Searching for SCSI / ATAPI devices... I 12:03:07 Found 1 DVD-ROM and 1 DVD±RW! I 12:04:19 Operation Started! I 12:04:19 Source File: C:\THE_LAST_LEGION.ISO I 12:04:19 Source File Sectors: 2,196,036 (MODE1/2048) I 12:04:19 Source File Size: 4,497,481,728 bytes I 12:04:19 Source File Volume Identifier: THE_LAST_LEGION I 12:04:19 Source File Implementation Identifier: DVD Shrink I 12:04:19 Source File File System(s): ISO9660, UDF (1.02) I 12:04:19 Destination Device: [0:1:0] HL-DT-ST DVD+-RW GSA-H21N A105 (E (ATA) I 12:04:19 Destination Media Type: DVD-RW (Disc ID: RITEKW01) (Speeds: 2x) I 12:04:19 Destination Media Sectors: 2,298,496 I 12:04:19 Write Mode: DVD I 12:04:19 Write Type: DAO I 12:04:19 Write Speed: MAX I 12:04:19 Link Size: Auto I 12:04:19 Test Mode: No I 12:04:19 BURN-Proof: Enabled I 12:04:19 Filling Buffer... (40 MB) I 12:04:20 Writing LeadIn... I 12:04:31 Writing Image... (LBA: 0 - 2196035) W 12:10:14 Failed to Write Sectors 462816 - 462847 - Invalid Address for Write W 12:10:14 Retrying (1 of 20)... W 12:10:14 Retry Failed - Invalid Address for Write W 12:10:14 Retrying (2 of 20)... W 12:10:14 Retry Failed - Invalid Address for Write W 12:10:14 Retrying (3 of 20)... W 12:10:14 Retry Failed - Invalid Address for Write W 12:10:14 Retrying (4 of 20)... W 12:10:14 Retry Failed - Invalid Address for Write W 12:10:14 Retrying (5 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (6 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (7 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (8 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (9 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (10 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (11 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (12 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (13 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (14 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (15 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (16 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (17 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (18 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (19 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:10:14 Retrying (20 of 20)... W 12:10:14 Retry Failed - Invalid Address For Write W 12:14:17 Retrying (21)... W 12:14:17 Retry Failed - Invalid Address For Write E 12:14:19 Failed to Write Sectors 462816 - 462847 - Invalid Address For Write E 12:14:19 Next Writable Address: 0 I 12:14:19 Synchronising Cache... E 12:14:20 Failed to Write Image! E 12:14:20 Operation Failed! - Duration: 00:10:01 I 12:14:20 Average Write Rate: 1,576 KB/s (1.1x) - Maximum Write Rate: 2,835 KB/s (2.0x)
I think you compilation is too large, you need to shrink it with DVD Shrink. Don't make it more than 4300MB. Also, there is a firmware update that you should do: http://forum.rpc1.org/dl_firmware.php?download_id=2302
Okay here is how I do it. First I load the Dvd that I want to back up into my drive. I used dvd shrink to shrink it down and then use dvd decrypter or image burn to burn it to a backup dvd. And I get the same IO error. I then came here to the forum to look up the reason why I had the issue. I then see a post that says try rip it for me. I tried that and got a IO error also. I have tried to remove the software from my computer then re-booted. And then did a reinstall and still I get the IO error. But yet I can burn Data DVD's with no problem...
Did you try to update your firmware and make the compilation smaller? What movie is it you are trying to back up? Is it a newer release? if the error is in the burning process, using Ripit4Me doesn't change much. It uses the same DVD decrypter for burning. it is also possible that your burner does not like the discs.Update the firmware. The I/O error is caused 99% of the time because of the disc: bad quality, incompatible with your burner, damagednot enough space...
Code: I 12:04:19 Source File Sectors: 2,196,036 (MODE1/2048) I 12:04:19 Destination Media Sectors: 2,298,496 like mentioned back it off to 4300meg in dvd shrink, does seem very close to outer edge... also get dvd+rw and booktype to dvd rom dvd-rw arnt very good... also check your formware as mentioned i think there is a B109 now, use imgburn - TOOLS / DRIVE / Check FIRMWARE update, it may help on those dvd-rw or not??? also verbetim are very good! but there are verbs out there with inferior dye coding, please use dvd identifier or dvdinfo pro or imgburn to tell us the dye coding off those verbatims please! the dvd-rw we can see is I 12:04:19 Destination Media Type: DVD-RW (Disc ID: RITEKW01) (Speeds: 2x)
I provided a link for the firmware update. That is essential for media compatibility with your burner.
Okay after downloading firmware updates I am still getting the IO Error. I am not sure what is going on here but still getting errors and normally all my backup software has worked great then one day boom it dosn't want to work. I have included the request for dvd readings below.... DVD ID Sony: Unique Disc Identifier: [DVD-R] – [DVD-R] Disc & Book Type: [DVD-R] – [DVD-R] Manufacturer Name: [Sony Recording Media Co.] Manufacturer ID: [Sony 16D1] Blank Disc Capacity: {2,298,496 Sectors = 4.71GB (4.38 GiB] [12:33:32] DVD Identifier V5.0.1 [12:33:32] Initializing Drive Interface [Auto-Select ASPI/SPTI] [12:33:32] SPTI Drive Interface Successfully Initialized [12:33:32] 1 Supported Drive Found (Out Of 2 Available Drives) [12:33:32] Manufacturer Database [08-OCT-06@727$93] Loaded From File : (@727$93) Entries Found [12:33:47] This Version Of 'DVD Identifier' Is Up-To-Date [12:33:47] The Manufacturer Database Is Up-To-Date [12:44:32] Waiting For Drive To Initialize Disc... [12:44:45] DVD-R/-RW Medium Detected. Starting Identification... [12:44:45] ** Initiating LPP Retrieval [12:44:45] LPP Read Completed Without Errors [12:44:45] Disc Identification Completed Successfully [12:46:34] DVD-R/-RW Medium Detected. Starting Identification... [12:46:34] ** Initiating LPP Retrieval [12:46:34] LPP Read Completed Without Errors [12:46:34] Disc Identification Completed Successfully Verbatim Unique Disc Identifier: [DVD-R;MCC 03RG20] Disc & Book Type: [DVD-R] – [DVD-R] Manufacturer Name: [Mitsubishi Chemical Corp.] Manufacturer ID: [MCC 03RG20] Blank Disc Capacity: {2,298,496 Sectors = 4.71GB (4.38 GiB] [12:33:32] DVD Identifier V5.0.1 [12:33:32] Initializing Drive Interface [Auto-Select ASPI/SPTI] [12:33:32] SPTI Drive Interface Successfully Initialized [12:33:32] 1 Supported Drive Found (Out Of 2 Available Drives) [12:33:32] Manufacturer Database [08-OCT-06@727$93] Loaded From File : (@727$93) Entries Found [12:33:47] This Version Of 'DVD Identifier' Is Up-To-Date [12:33:47] The Manufacturer Database Is Up-To-Date [12:44:32] Waiting For Drive To Initialize Disc... [12:44:45] DVD-R/-RW Medium Detected. Starting Identification... [12:44:45] ** Initiating LPP Retrieval [12:44:45] LPP Read Completed Without Errors [12:44:45] Disc Identification Completed Successfully [12:46:34] DVD-R/-RW Medium Detected. Starting Identification... [12:46:34] ** Initiating LPP Retrieval [12:46:34] LPP Read Completed Without Errors [12:46:34] Disc Identification Completed Successfully [12:50:04] Waiting For Drive To Initialize Disc... [12:50:19] DVD-R/-RW Medium Detected. Starting Identification... [12:50:19] ** Initiating LPP Retrieval [12:50:19] LPP Read Completed Without Errors [12:50:19] Disc Identification Completed Successfully
i still think discs used the sony id code i never heard of>? Manufacturer Name: [Mitsubishi Chemical Corp.] Manufacturer ID: [MCC 03RG20] these im not sure, but i dont think there that good, maybe someone else can comment, but not the verbs i know and would recommend to use. my verbs have TY id code which is the best yours has MCC do you use nero at all? as this app gives a good log file on alot of issues! do you have DMA enabled in device manager under yuor ide controllers/primary secondary (aslong as it is an ide drive not USB) you got roxio apps installed?
Yes I have Roxio and Sonic installed it came as a bundle pack with my dell computer. When I try to back-up Days of Darkness under DVD shrink the greenline is at 4,181 and under video it says Automatic 3,478. I don't use Nero I use DVD Decrypter and I have used these two types of dvd's for the last year easily..Could the I/O Error be my computer??? Like I said before I can burn Data disks with Roxio with no problems at all. But for some reason this error thing has started in the last 2 weeks. I clean my burner after every 10 hours of use. Make sure all dvd's are scratch free and I don't use my computer when I am backing up. I am lost to this issue and I personally have no answers I will supply you with any logs needed if we can figure it out.
Okay, I here is some more about the I/O error: http://forums.afterdawn.com/thread_view.cfm/203426 It might be that your drive is faulty. http://forum.imgburn.com/index.php?showtopic=2036 Did you check the DMA to see if it is still on? If it slips in PIO mode that could also cause that error. http://www.onthegosoft.com/dma_setting_nt.htm
Okay guys I have worked on this along with all you guys and all I can say is Thank you Thank you. I really appreciate all your help that you have given. Tonight I went to Best Buy and talked to one of the guys at Geek Squad about the issue I am having. He sold me a new DVD Burner and explained how to hook it up with the master and slave drives. I came home and installed the new DVD burner and ran a trial and error run on it hoping that the movie would burn. And guess what it is working perfectly now. No issues at all with the burns. I really want to thank you for all your input and help I really appreciate it. Hope I can learn to offer the same help once I learn more about computers. Nadine
Well Nadine, glad to hear you are happily burning. I hoped your burner wasn't the case(we still don't know for sure, the BestBuy guy will tell you anything to sell something), but if you bought a new burner, treat it nice! Don't use any low quality media! If you can , try to test your old burner in a friend's computer and see if you have any success with it. Now that you have 2 drives, I guess you can use the old one as a reader. Cheers!
what make is the burner? note: whats happened is like mentioned best buy makes a sale. YAY lol and you now own a burner that can burn inferior media, which is ok i spose... but try the burnt media on a stand alone player as many as you can try, mates ones, ps3, xbox, etc etc... see how it goes...