Kryptview 281108 & 291108 Fix

you need

http://www.maplin.co.uk/Module.aspx?ModuleNo=97740

and

http://www.maplin.co.uk/Module.aspx?ModuleNo=29968

 

Thanks for the quick responce, i'll get onto it tomorrow

 

hi im new to this my kryptview box has gone down cant seem to load the soft ware it wont open i looked on eamos library like you said but what am i looking for can any lay it out in easy instructions , this is doing me head in

 

Ok tried several things and this is what happens.When I go into device manager click on com 1 it says com 2 is in use, so I then go back and open com 2 and it says com 1 is in use. I try to swap them around but the same happens. So my reasoning is that its because of my usb mouse attatched at same time as box. So if I unplug my usb mouse the start download button wont work on the STB editor. What the hell am I supposed to do, getting really stressed at the moment.

 

steve59,try inserting the cable in the other ports on your laptop, this worked for me and your problem is the same word for word.

 

My Laptop has vista and vista dont seem to recognise any ports by the look of it, tried other ports on pc but still the same, but my usb mouse will only work in the one port and not in the other three.

 

Where are all the experts when you need them. By the way what does "File size is Zero" mean

 

hi guys does anyone find the new fix for kryptview isnt working that good all my mates who have them are saying the same as me the cable box seems to be freezing up every hour or so anyone getting the same thats 10 boxes im talking about

 

steve59, OK, maybe its best to go back to basics and when you get to "the open button" close all other open windows except that one.

Then click open button, you should get a choice of ports,,, slick on number 4 port, if this those not work try number 3 port. Its one those ports on your laptop.

Also press the red button twise on the remote control immediatly and then the stand by button.

 

Ok will give it a try but like I said I have vista on my laptop. Anyway, after doing a factory reset is this when I update the firmware or should I search for channels first then try to update the firmware.

 

Steve 59, its like get the download first and depending on your area you can take it futher from there.

Question for you... the null cable your using... I take it you have a usb adapter on it and if,, those it have softwere with it?????.

 

The fix definately works this way.
Connect your box to a PC (desktop not laptop) using the null cable shown by HiTeck in this link: http://forums.afterdawn.com/thread_view.cfm/674371
Now follow the instructions in this link:
http://forums.afterdawn.com/thread_view.cfm/723335

 

Ive got a 9 pin serial com Male socket on my pc but how do I configure this to download to box. The only ports visible in device manager are com1 com2 and lpt 1.

 

At last Ive managed to do it, downloaded the all windows usb driver, selected the right port and bingo, now to plug it in and see what hapens, thanx to those that helped.

 

has anyone had problems getting the usb to null modem adapter working with vista. the adapter comes with drivers but says it should be plug and play with vista, vista tries to install and tells me it cant, iv also tried searchin for vista but no luck.i read in a forum theres an allwindows driver for it? :s
thanks

 

http://www.gilsson.com/usb_drivers_download.htm
try the driver here, install the driver first, do a restart then connect your cable to a different usb port other than the one you have used before or if you have a driver cd with the cable it obviously has to be used,just as a car needs a driver to go!
im using a vista lappy and have never had trouble with any box.

 

Hi Guys,

Have just flashed a A700C with the 28/11/08 firmware. No problems with that. Now I can't seem to get any channals in the list. Everytime I do a search on N** on baud 6887, it says search complete and there are no channels to view.

Can anyone help me to reinstall the channels?

Ta

 

Have you tried searching under C&W or TW?

 

No didn't try searching under the other providers, but having tried many differeny things, as if by magic, 49 "TP"'s became available and suddenly lotsa of channels came up, all except the sp*** channels.

Can't explain what I did (as I just kept trying different things), and forgive me for not being too tech savvy but any other ideas to get the other channels?

THanks again.

 

anyone know if its possible to get the epg to appear in every menu like on a legit box?
cheers