Missing Channels 06/09/07 Solution.

No need to shout at me.

1. Press menu.
2. Press Installation.
3. Press Manual scan , (make sure your provider is correct).
4. Input the frequencies I gave you. You will have to enter them one by one, thereby doing two seperate scans.
5. Click enable and let it scan.

Newly found channels will appear at the bottom of your channel list.

 

alright scouser i got it i taught myself whooooooooooo

 

To find out what frequencies you where missing or to input them?

 

As the saying goes " You learn something new every day "

 

cheers guys,frequu 402000 workin great for plus 1 channels

 

Youre welcome and thank you.

 

hi scouser hope you can help you know quiet a lot, eurovox bought in may crashed no power , i already had this problem with the new 2008 version and supplier is replacing them but is the same problem applying to the eurovox Red i buy from UK for mainly family but i hope this is not the beginning of trouble my first ever purchase was April and thats fine.

 

sorry meant to thank you in advance for any help you can give me im in d12 and learning all the time but all family/friends rely on me to fix problems thanks again chetna

 

Im not too sure about Eurovox but you can have a look over here

http://forums.afterdawn.com/thread_view.cfm/559483

 

thanks celtic i will keep an eye on things at the moment it seems if i dont get to download critical update first the boxes just go off thanks again chetna

 

NEW FREQUENCY WORK GREAT

DOES ANYONE HAVE A FULL LIST OF FREQENCY FOR DUBLIN

 

Have a look here for list and freq

 

Hi All,
I only noticed this issue myself this morning when going to search for LiverpoolFCTV. Tried doing a manual scan on my Replay Lite box on 387.500Mhz and also on 394.000Mhz but kept getting the message 'No Programs Found'. So I took the plunge and lost all my favourites and channel order by doing a full auto scan...for this I brought the Reply Lite downstairs to the cable point that is coming in from outside. Done the scan and it picked up everything fine including LiverpoolFCTV, Great! Brought the Replay Lite box back upstairs where I normally use it and the for last 11 channels it picked up I keep getting the 'No Signal' message even though everything else is working fine. Done a factory reset and tried a full auto scan upstairs but it didn't pick up the last 11 channels that it picked up downstairs. All these channels happen to be on 394.000Mhz so basically downstairs my Replay Lite will pick up channels on this freq but upstairs it won't. Anyone have any ideas? Ohh yeah, it's not the splitter as I took that out of the loop. Thanks for any help...

 

Yes I have noticed this sort of query on both the Starview and Eurovox also for the last day or two only. It looks like a signal strenght issue on just this one transponder a signal booster may solve the problem. Or as there has been a bit of juggling on this transponder recently it may settle when N** have completed the migration.

 

Thanks for the reply ScOuser...I'll keep a close eye on it over the next few days and see if it changes. Hopefully so! (",)

 

No problem if the problem persists then an attenuated booster may solve the problem.

 

Scouser, Thats the exact problem I had a while back (Setanta 2 prob if u can re-call) I thought it was a dodgy splitter, but the other box I have now works on the 394.000 freq, just came back. I think its got to do with signal strength, it will settle down. This seems to happen in areas after a freq change, for a couple of days.

 

Cheers Mick noticed that too as the N** transponders are been messed about a bit of late due to the channel changes. I have also noted that on certain boxes if you set the frequency as per the subbed boxes of 394.500 the signal improves somewhat.