1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero Error - illegal disk - Please Help

Discussion in 'Nero discussion' started by raduly, Jul 5, 2005.

Page 13 of 16
  1. Dave_3

    Dave_3 Member

    Joined:
    Mar 19, 2006
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    I am using DVD Shrink. I already leave it completely alone while burning. I'm not exactly sure what to do though to try and smooth it out... any ideas, do you feel i should use other programs instead???
     
    Dave_3, Mar 24, 2006
    #241
  2. Dave_3

    Dave_3 Member

    Joined:
    Mar 19, 2006
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    DVD shrink, 3.2 to be exact... is there something better?
     
    Dave_3, Mar 24, 2006
    #242
  3. Dave_3

    Dave_3 Member

    Joined:
    Mar 19, 2006
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    how do i know if my firmware is good to go too?
     
    Dave_3, Mar 24, 2006
    #243
  4. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    10,818
    Likes Received:
    4
    Trophy Points:
    118
    Do you want modified firmware or factory firmware? Just so you'll know the modified firmware will make your drive region free, remove riplock and allow bitsetting...the factory firmware will only update your drive, none of the other niceties will be included.

    You will want 1Y5 from here for the modified firmware if you are sure it is a 3550: http://www.micheldeboer.nl/firmware/

    Original firmware can be found at the NEC site.

    EDIT: Try Deep Analysis and AEC set to maximum smooth, your wrinkles should be ironed out. These features add a little time, but for the quality tradeoff it is well worth the extra time. Nero Recode is essentially the same program only slightly faster, and not free.
     
    Last edited: Mar 24, 2006
    LOCOENG, Mar 24, 2006
    #244
  5. Dave_3

    Dave_3 Member

    Joined:
    Mar 19, 2006
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    Do you recommend going with the modified? I have no idea what i'm doing, so i'm going by your guidance here. Under my device manag. it says its a ND-3550A, so... i think so??? I already do the deep analysis, but i believe i have it set on max sharp, not max smooth. I'll attempt that. With the modifed firmware, would i still need to use dvd decryptor?
     
    Dave_3, Mar 24, 2006
    #245
  6. Dave_3

    Dave_3 Member

    Joined:
    Mar 19, 2006
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    By the way, I really appreciate the help! The burner you recommended seems great except my new dillema...
     
    Dave_3, Mar 24, 2006
    #246
  7. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    10,818
    Likes Received:
    4
    Trophy Points:
    118
    You burner shouldn't have anything to do with your delimma. I use modified firmware, I love it. You will need another tool to help you flash your drive, when you download the bin make sure you follow the instructions explicitly.

    win21gui: http://binflash.cdfreaks.com/ It's about half way down the page.
     
    LOCOENG, Mar 24, 2006
    #247
  8. hitmang17

    hitmang17 Member

    Joined:
    Mar 24, 2006
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    I've been having a similar problem for quite some time now. I'll post a couple of recent burn logs. I appreciate any help you can give.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.8.2
    Internal Version: 7, 0, 8, 2
    (Nero Express)
    Recorder: <TSSTcorp CD/DVDW TS-L532U>Version: GA03 - HA 1 TA 0 - 7.0.8.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TSSTcorp CD/DVDW TS-L532U>Version: GA03 - HA 1 TA 0 - 7.0.8.2
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MHV2100AT PL atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-L532U atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-L532U E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1022MB (1046636kB)
    Free physical memory: 526MB (539216kB)
    Memory in use : 48 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.3.2006
    Burn DVD Image
    11:29:22 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 81920KB of Memory

    11:29:22 PM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    11:29:22 PM #3 Text 0 File Writer.cpp, Line 113
    Writer E: TSSTcorp CD/DVDW TS-L532U running

    11:29:22 PM #4 Text 0 File Burncd.cpp, Line 3353
    Turn on Disc-At-Once, using DVD media

    11:29:22 PM #5 Text 0 File DlgWaitCD.cpp, Line 289
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2039053 (453:07.28, 3982MB)

    11:29:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 301
    Write in overburning mode: NO (enabled: CD)

    11:29:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 2715
    Recorder: TSSTcorp CD/DVDW TS-L532U, Media type: DVD-R
    Disc Manufacturer: FUJIFI - LM03
    Disc Application Code: 64, Disc Physical Code: 193

    11:29:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 473
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:29:22 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2039054 (2039054) = #2039054/453:7.29
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2039054 blocks [E: TSSTcorp CD/DVDW TS-L532U]
    --------------------------------------------------------------

    11:29:22 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: TSSTcorp CD/DVDW TS-L532U] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4175982592, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2039054 | lead-out | 1 | 0x41 | 0x00

    11:29:22 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    11:29:22 PM #12 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    11:29:22 PM #13 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    11:29:22 PM #14 Text 0 File Burncd.cpp, Line 4187
    Cache writing successful.

    11:29:22 PM #15 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    11:29:22 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 2x (2,770 KB/s)

    11:29:23 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    11:29:23 PM #18 Text 0 File DVDR.cpp, Line 2760
    Recording mode: Sequential Recording Mode

    11:29:23 PM #19 Text 0 File DVDR.cpp, Line 2916
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:29:23 PM #20 Text 0 File Cdrdrv.cpp, Line 8661
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 30000 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:43:13 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 10 5F 80 00 00 20 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
    Buffer x0a9d0000: Len x10000
    0x00 00 01 BA 45 3A F5 26 9D 0F 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 48 00 9C 6A 76 1E 25 26 38
    0x0F 30 E9 C9 DD 3D 3C 5A 79 B4 29 50 60 62 0B 72

    11:43:13 PM #22 CDR -1135 File Writer.cpp, Line 302
    Write error
    E: TSSTcorp CD/DVDW TS-L532U

    11:43:13 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:43:14 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    11:43:14 PM #25 Text 0 File DVDR.cpp, Line 3156
    EndDAO: Last written address was 1073023

    11:43:14 PM #26 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/10/2004 2:00:00 PM
    File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 8:30:18 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 4:54:10 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)







    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.8.2
    Internal Version: 7, 0, 8, 2

    Recorder: <TSSTcorp CD/DVDW TS-L532U>Version: GA03 - HA 1 TA 0 - 7.0.8.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TSSTcorp CD/DVDW TS-L532U>Version: GA03 - HA 1 TA 0 - 7.0.8.2
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MHV2100AT PL atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-L532U atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-L532U E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1022MB (1046636kB)
    Free physical memory: 511MB (523416kB)
    Memory in use : 49 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.3.2006
    Burn DVD Image
    10:11:03 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 81920KB of Memory

    10:11:03 PM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    10:11:03 PM #3 Text 0 File Writer.cpp, Line 113
    Writer E: TSSTcorp CD/DVDW TS-L532U running

    10:11:03 PM #4 Text 0 File Burncd.cpp, Line 3353
    Turn on Disc-At-Once, using DVD media

    10:11:03 PM #5 Text 0 File DlgWaitCD.cpp, Line 289
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2039053 (453:07.28, 3982MB)

    10:11:03 PM #6 Text 0 File DlgWaitCD.cpp, Line 301
    Write in overburning mode: NO

    10:11:03 PM #7 Text 0 File DlgWaitCD.cpp, Line 2715
    Recorder: TSSTcorp CD/DVDW TS-L532U, Media type: DVD-R
    Disc Manufacturer: FUJIFI - LM03
    Disc Application Code: 64, Disc Physical Code: 193

    10:11:03 PM #8 Text 0 File DlgWaitCD.cpp, Line 473
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:11:03 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2039054 (2039054) = #2039054/453:7.29
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2039054 blocks [E: TSSTcorp CD/DVDW TS-L532U]
    --------------------------------------------------------------

    10:11:04 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: TSSTcorp CD/DVDW TS-L532U] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4175982592, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2039054 | lead-out | 1 | 0x41 | 0x00

    10:11:04 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    10:11:04 PM #12 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    10:11:04 PM #13 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    10:11:04 PM #14 Text 0 File Burncd.cpp, Line 4187
    Cache writing successful.

    10:11:04 PM #15 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    10:11:04 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 2x (2,770 KB/s)

    10:11:04 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    10:11:04 PM #18 Text 0 File DVDR.cpp, Line 2760
    Recording mode: Sequential Recording Mode for Multisession

    10:11:04 PM #19 Text 0 File DVDR.cpp, Line 2916
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:11:04 PM #20 Text 0 File Cdrdrv.cpp, Line 8661
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 30000 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:35:27 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 1D 47 60 00 00 20 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
    Buffer x05410000: Len x10000
    0x00 00 01 BA 46 35 44 C9 95 19 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 D4 A4 A5 37 F4 A8 03 BE 88
    0x04 57 D8 76 96 10 DF D1 C5 E7 9F 1B 07 CB 1B F5

    10:35:27 PM #22 CDR -1135 File Writer.cpp, Line 302
    Write error
    E: TSSTcorp CD/DVDW TS-L532U

    10:35:28 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    10:35:28 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    10:35:28 PM #25 Text 0 File DVDR.cpp, Line 3156
    EndDAO: Last written address was 1918815

    10:35:28 PM #26 Phase 133 File dlgbrnst.cpp, Line 1730
    Writing short lead-out

    10:35:28 PM #27 SPTI -1046 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x52 01 00 00 00 01 00 00 24 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
    Buffer x0349cc00: Len x24

    10:35:28 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x52 01 00 00 00 02 00 00 24 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
    Buffer x0349cc00: Len x24

    10:35:28 PM #29 SPTI -1046 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

    10:35:28 PM #30 CDR -1046 File WriterStatus.cpp, Line 167
    Illegal disc
    E: TSSTcorp CD/DVDW TS-L532U

    10:35:28 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    10:35:28 PM #32 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/10/2004 2:00:00 PM
    File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 8:30:18 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 4:54:10 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    hitmang17, Mar 24, 2006
    #248
  9. Dave_3

    Dave_3 Member

    Joined:
    Mar 19, 2006
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    Well, I tried another disk this time with it set at max smooth instead of max sharp with the deep - the results didn't change. It still gets pixelly, sound jumps a bit, things of the nature. I have no idea what to try... Would the change in firmware maybe help? I'm so frusterated at the moment haha, mainly due to the fact that I'm clueless how to get this working again, but I really want it to! If i change the firmware, am i able to put it back how it was originally if i would so choose? Sorry for all of the questions, when it comes to computers, i know point and click haha. I'm as good with a computer as my girlfriend is under a car.
     
    Dave_3, Mar 24, 2006
    #249
  10. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @hitmang17 -

    at the moment all i can see is Roxio (interferes with Nero) -
    - uninstall Roxio and uninstall completely via Roxio Zapper - http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
     
    creaky, Mar 25, 2006
    #250
  11. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    10,818
    Likes Received:
    4
    Trophy Points:
    118
    @Dave

    The firmware really shouldn't have anything to do with pixellation, stuttering, etc. Typically those things are caused by:

    1. Too much compression, fix by using DA and AEC...you've done that.

    2. Burning too fast...you burn at 4X

    3. Applying paper labels...are you doing this?

    4. Poor quality media...you are using top quality Verbs.

    5. Multitasking...you say to step away from the puter.

    I'm somewhat baffled, could you post another log? Yes you can flash back to original firmware if you so wish to as long as you don't fry your drive with the first flash...LOL Don't be scared of flashing your drive, just be cautious, read all that you can about it from the link provided earlier, take a deep breath and do it. I flashed my first drive about six months ago and it was no big deal, just follow the instructions in the readme file.


    EDIT: What was your compression ratio on the movie you are currently having problems with? Full disc or Reauthor mode?
     
    Last edited: Mar 25, 2006
    LOCOENG, Mar 25, 2006
    #251
  12. hitmang17

    hitmang17 Member

    Joined:
    Mar 24, 2006
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    I ran Roxizap but still no dice. Here is my most recent log:

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.8.2
    Internal Version: 7, 0, 8, 2

    Recorder: <TSSTcorp CD/DVDW TS-L532U>Version: GA03 - HA 1 TA 0 - 7.0.8.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TSSTcorp CD/DVDW TS-L532U>Version: GA03 - HA 1 TA 0 - 7.0.8.2
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MHV2100AT PL atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-L532U atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-L532U E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1022MB (1046636kB)
    Free physical memory: 633MB (648488kB)
    Memory in use : 38 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    25.3.2006
    Burn DVD Image
    10:04:31 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 81920KB of Memory

    10:04:31 AM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    10:04:31 AM #3 Text 0 File Writer.cpp, Line 113
    Writer E: TSSTcorp CD/DVDW TS-L532U running

    10:04:31 AM #4 Text 0 File Burncd.cpp, Line 3353
    Turn on Disc-At-Once, using DVD media

    10:04:31 AM #5 Text 0 File DlgWaitCD.cpp, Line 289
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2039053 (453:07.28, 3982MB)

    10:04:31 AM #6 Text 0 File DlgWaitCD.cpp, Line 301
    Write in overburning mode: NO

    10:04:31 AM #7 Text 0 File DlgWaitCD.cpp, Line 2715
    Recorder: TSSTcorp CD/DVDW TS-L532U, Media type: DVD-R
    Disc Manufacturer: FUJIFI - LM03
    Disc Application Code: 64, Disc Physical Code: 193

    10:04:31 AM #8 Text 0 File DlgWaitCD.cpp, Line 473
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:04:31 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2039054 (2039054) = #2039054/453:7.29
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2039054 blocks [E: TSSTcorp CD/DVDW TS-L532U]
    --------------------------------------------------------------

    10:04:31 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: TSSTcorp CD/DVDW TS-L532U] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4175982592, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2039054 | lead-out | 1 | 0x41 | 0x00

    10:04:31 AM #11 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    10:04:31 AM #12 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    10:04:31 AM #13 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    10:04:31 AM #14 Text 0 File Burncd.cpp, Line 4187
    Cache writing successful.

    10:04:31 AM #15 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    10:04:31 AM #16 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 4x (5,540 KB/s)

    10:04:31 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    10:04:31 AM #18 Text 0 File DVDR.cpp, Line 2760
    Recording mode: Sequential Recording Mode

    10:04:31 AM #19 Text 0 File DVDR.cpp, Line 2916
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:04:31 AM #20 Text 0 File Cdrdrv.cpp, Line 8661
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 30000 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:23:22 AM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 1D 80 60 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
    Buffer x05460000: Len x10000
    0x00 00 01 BA 46 38 BC 9C 75 AF 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 E9 4B 0E AE 8A C8 B0 6A 37
    0x78 B4 44 33 A1 D4 47 3C C0 D0 70 40 D6 7B 43 4B

    10:23:22 AM #22 CDR -1135 File Writer.cpp, Line 302
    Write error
    E: TSSTcorp CD/DVDW TS-L532U

    10:23:22 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    10:23:23 AM #24 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    10:23:23 AM #25 Text 0 File DVDR.cpp, Line 3156
    EndDAO: Last written address was 1933407

    10:23:23 AM #26 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/10/2004 2:00:00 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 4:54:10 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    hitmang17, Mar 25, 2006
    #252
  13. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    10,818
    Likes Received:
    4
    Trophy Points:
    118
    There should be some numbers here besides the zeroes if your discs are being recognized, try another brand, Fuji may not be supported by your drive.

    This error indicated the same as above, try another brand such as Verbatim or Taiyo Yuden, Sony, Maxell (made in Japan).
     
    LOCOENG, Mar 25, 2006
    #253
  14. GPL44

    GPL44 Member

    Joined:
    Feb 22, 2006
    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    11
    Update: Still no issues burning as long as I kill the Music Match process (if its running) before I burn.

     
    GPL44, Mar 25, 2006
    #254
  15. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    10,818
    Likes Received:
    4
    Trophy Points:
    118
    Conflict found, congrats. Happy burning.
     
    LOCOENG, Mar 25, 2006
    #255
  16. Dave_3

    Dave_3 Member

    Joined:
    Mar 19, 2006
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    Nope, no labels. One of the disks I did had zero compression and the other was at 70%. In the past I've done it in the low 60's with no problems even... so I'm not sure either. It seems as though I've upgraded my entire process... how can I be turning out terrible results compared to my old method?!?! How can i get another log for you? If the disk completes it doesn't offer to have a log like when you end up with an error message... Let me know and I'll post one up for you.
     
    Dave_3, Mar 25, 2006
    #256
  17. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    10,818
    Likes Received:
    4
    Trophy Points:
    118
    The log should be there, you use Nero 6 or Nero 7?

    Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt

    Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.txt
     
    LOCOENG, Mar 25, 2006
    #257
  18. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    Last edited: Mar 28, 2006
    gwendolin, Mar 28, 2006
    #258
  19. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    creaky, Mar 29, 2006
    #259
  20. hitmang17

    hitmang17 Member

    Joined:
    Mar 24, 2006
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    I was able to get one good burn with a Japan-made Maxell, but no more. Here's a new log. I appreciate the work you all do.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.8.2
    Internal Version: 7, 0, 8, 2

    Recorder: <TSSTcorp CD/DVDW TS-L532U>Version: GA03 - HA 1 TA 0 - 7.0.8.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TSSTcorp CD/DVDW TS-L532U>Version: GA03 - HA 1 TA 0 - 7.0.8.2
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MHV2100AT PL atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-L532U atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-L532U E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 1022MB (1046636kB)
    Free physical memory: 611MB (626480kB)
    Memory in use : 40 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.4.2006
    Burn DVD Image
    3:01:25 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 81920KB of Memory

    3:01:25 PM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    3:01:25 PM #3 Text 0 File Writer.cpp, Line 113
    Writer E: TSSTcorp CD/DVDW TS-L532U running

    3:01:25 PM #4 Text 0 File Burncd.cpp, Line 3353
    Turn on Disc-At-Once, using DVD media

    3:01:25 PM #5 Text 0 File DlgWaitCD.cpp, Line 289
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1208507 (268:33.32, 2360MB)

    3:01:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 301
    Write in overburning mode: NO

    3:01:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 2715
    Recorder: TSSTcorp CD/DVDW TS-L532U, Media type: DVD+R
    Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 3

    3:01:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 473
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    3:01:25 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1208508 (1208508) = #1208508/268:33.33
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1208508 blocks [E: TSSTcorp CD/DVDW TS-L532U]
    --------------------------------------------------------------

    3:01:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: TSSTcorp CD/DVDW TS-L532U] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2475024384, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1208508 | lead-out | 1 | 0x41 | 0x00

    3:01:25 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    3:01:25 PM #12 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    3:01:25 PM #13 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    3:01:25 PM #14 Text 0 File Burncd.cpp, Line 4187
    Cache writing successful.

    3:01:25 PM #15 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    3:01:25 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 4x (5,540 KB/s)

    3:01:25 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    3:01:26 PM #18 Text 0 File Cdrdrv.cpp, Line 8661
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: YUDEN000
    Media type ID: T02
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
    23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    3:01:26 PM #19 SPTI -1065 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
    Buffer x0355da00: Len x2

    3:01:26 PM #20 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    3:05:16 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 59 60 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
    Buffer x0a1c0000: Len x10000
    0x00 00 01 BA 44 0A F4 FD 36 2D 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 B2 22 CC 0D A8 D7 11 67 C9
    0xA3 7E 1F 68 DF A6 30 3E 96 CD 0A 88 5B 70 91 2E

    3:05:16 PM #22 CDR -1135 File Writer.cpp, Line 302
    Write error
    E: TSSTcorp CD/DVDW TS-L532U

    3:05:16 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    3:05:16 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    3:05:17 PM #25 SPTI -1046 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

    3:05:17 PM #26 SPTI -1046 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

    3:05:17 PM #27 Phase 127 File dlgbrnst.cpp, Line 1730
    Generating DVD high compatibility borders

    3:05:17 PM #28 CDR -1046 File WriterStatus.cpp, Line 167
    Illegal disc
    E: TSSTcorp CD/DVDW TS-L532U

    3:05:17 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    3:05:17 PM #30 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/10/2004 3:00:00 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 1:12:26 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    hitmang17, Apr 2, 2006
    #260
Page 13 of 16

Share This Page