1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero Error - illegal disk - Please Help

Discussion in 'Nero discussion' started by raduly, Jul 5, 2005.

Page 3 of 16
  1. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @wglee -

    - your firmware is 5 versions out of date, 1.0C is here - http://forum.rpc1.org/dl_firmware.php?download_id=1596

    - DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm

    - 4464MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space

    - see other comments

    - CDRALW2K.SYS is part of Roxio. try uninstalling Roxio (doesn't always play well with Nero), then you might need to fully remove using Roxio Zapper - http://www.microadvantage.net/utilities
     
    Last edited: Nov 22, 2005
    creaky, Nov 22, 2005
    #41
  2. wglee

    wglee Member

    Joined:
    Nov 22, 2005
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    creaky,

    I posted an older log file by mistake, I had already done everything you mentioned except removing Roxio and the MusicMatch files discussed above.

    One (or both)of those fixes did the job.

    Many thanks.
     
    wglee, Nov 22, 2005
    #42
  3. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    no worries, i thought so, i just do logfiles when i see them, maybe someone else will stumble on it and benefit anyway

    happy burning
     
    creaky, Nov 22, 2005
    #43
  4. rogerKN

    rogerKN Member

    Joined:
    Dec 5, 2005
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    alright, same problem when writing an 8 speed imation dvd+r
    other dvd's (platinum 8 speed +r and fuji 4 speed dvd+rw) doing fine though.
    drive is a rw8160 (ricoh) built in in a targa notebook. it can only write at 2.4 speed

    firmware was 1.08 since some time, and it seems that's the most recent one. dma is on.
    i found a trick on the net that showed how to "upgrade" my drive to rw 8165 by using that firmware. i tried it out and then, i could only burn the dvd's 4 speed (8165 drive is capable of that, but mine probably isn't, even though i might get it to think it is :))
    anyway, i tried it, same error. however, i could still write my old dvd's (the platinum & fuji ones) at 2.4 speed. that worked fine.
    by now, i changed back to rw 8160 and 1.08. i'm totally out of ideas. could it be that my drive just doens't like these disks? :( silly, bought 100 of them ...

    nero log:
     
    Last edited: Dec 7, 2005
    rogerKN, Dec 7, 2005
    #44
  5. laptop9

    laptop9 Member

    Joined:
    Dec 7, 2005
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Hello everyone. I am having the same problem. The thing is, I had to reinstall my comp, and before I had the same setup as now, but before I was able to burn things fine. My computer is Dell 4150, NEC DVD burner. And I believe I have everything updated to the most recent releases. I have iTunes on my comp, and McAffe AntiVirus. Here is my log:
    Any help would be appreciated.
     
    Last edited: Dec 7, 2005
    laptop9, Dec 7, 2005
    #45
  6. attar

    attar Senior member

    Joined:
    Jun 17, 2005
    Messages:
    11,147
    Likes Received:
    41
    Trophy Points:
    128
    @laptop9

    [bold]Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    [/bold]

    Check your Nero settings(you don't want multi-session) to make sure you are finalizing the disk (has to be finalized to be playable) and do a simulation burn.
     
    Last edited: Dec 7, 2005
    attar, Dec 7, 2005
    #46
  7. laptop9

    laptop9 Member

    Joined:
    Dec 7, 2005
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Hi attar. I took off multisession to have the finalized disk, and did the simulation. Here is the log:

     
    laptop9, Dec 7, 2005
    #47
  8. attar

    attar Senior member

    Joined:
    Jun 17, 2005
    Messages:
    11,147
    Likes Received:
    41
    Trophy Points:
    128
    @laptop9

    The drive firmware is up to date.
    Your media is good.

    Try a Nero update to 6.6.0.18
    http://ww2.nero.com/nero6/enu/nero-up.php
    Don't download the toolbar helper that's checked off on the D/L page.

    [bold]CdRomPeripheral : SW3934E UYO908Z 1.0 dtscsi Port 2 ID 0 DMA: Off[/bold]

    Is that a virtual drive?Don't think it does anything but you could try to turn DMA on.

    http://home.comcast.net/~bbmayo/checking DMA.pdf

    After that it's the turn of the experts.





     
    attar, Dec 7, 2005
    #48
  9. queenife

    queenife Member

    Joined:
    Dec 7, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    I am getting this error.. i am getting frustrated, have tried to uninstall nero, and dvd shrink... please help me.... before i blow this damn thing up..... thanks alot


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
    Nero API version: 6.3.1.17
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom

    === Scsi-Device-Map ===
    DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-L532 E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047024kB)
    Free physical memory: 540MB (553656kB)
    Memory in use : 47 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.12.2005
    NeroAPI
    10:40:28 PM #1 Text 0 File NeroBurnCommon.cpp, Line 78
    Message file not found


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/19/2004 11:33:44 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    queenife, Dec 7, 2005
    #49
  10. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    creaky, Dec 7, 2005
    #50
  11. laptop9

    laptop9 Member

    Joined:
    Dec 7, 2005
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    @attar


    . . . .

    experts...?

    followed instructions, didnt work out. same error.
     
    laptop9, Dec 7, 2005
    #51
  12. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @laptop9 -

    you're on my list, i've got a shedload of work to get thru first. sorry i'm normally straight in there but i've gotta get this stuff done. have a look at my replies in that link for now, and see if it helps at all with your logfile.
     
    creaky, Dec 7, 2005
    #52
  13. simoza

    simoza Member

    Joined:
    Dec 12, 2005
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Hy, I'm first time here...
    I have the same problem of can't be able to write a dvd. The notice is illegal disk. So, reading the post, i have upgraded the burn firmware. My bruning machine is a Freecom.
    Weel, after upgrading, i have the same errors, so I've unistalled nero 6.6.0.1 the installed again. Now my burning process start, but when my process come to 100% nero show the follow message.
    Burn process failed at 4x.

    The log is:
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16.51.12
    Nero version: 6.6.0.1
    Recorder: <FREECOM_ DVD+/-RW4B> Version: 1.34 - HA 3 TA 0 - 6.6.0.1
    Adapter driver: <> HA 3
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <V386 STEALTH DVD >Version: 1.0h - HA 0 TA 0 - 6.6.0.1
    Adapter driver: <Stealth> HA 0

    === Scsi-Device-Map ===
    CdRomPeripheral : V386 STEALTH DVD 1.0h Stealth Port 0 ID 0 DMA: Off
    DiskPeripheral : IC25N030ATCS04-0 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : TEAC DW-224E atapi Port 2 ID 0 DMA: On

    === CDRom-Device-Map ===
    V386 STEALTH DVD F: CDRom1
    TEAC DW-224E D: CDRom0
    FREECOM_ DVD+/-RW4B E: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 509MB (521712kB)
    Free physical memory: 302MB (309888kB)
    Memory in use : 40 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    12.12.2005
    UDF/ISO compilation
    21.41.15 #1 Phase 112 File dlgbrnst.cpp, Line 1853
    DVD-Video files reallocation started

    21.41.15 #2 Phase 114 File dlgbrnst.cpp, Line 1853
    DVD-Video files reallocation completed (no file modified)

    21.41.15 #3 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    21.41.16 #4 Phase 111 File dlgbrnst.cpp, Line 1853
    DVD-Video files sorted

    21.41.19 #5 Text 0 File Reader.cpp, Line 127
    Reader running

    21.41.19 #6 Text 0 File Writer.cpp, Line 122
    Writer FREECOM_ DVD+/-RW4B running

    21.41.19 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    21.41.19 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    21.41.19 #9 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    21.41.19 #10 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    21.41.19 #11 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    21.41.19 #12 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: FREECOM_ DVD+/-RW4B, Media type: DVD-R
    Disc Manufacturer: GSC002 -
    Disc Application Code: 64, Disc Physical Code: 193

    21.41.19 #13 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    21.41.19 #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [FREECOM_ DVD+/-RW4B]
    --------------------------------------------------------------

    21.41.19 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [FREECOM_ DVD+/-RW4B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286128 | lead-out | 1 | 0x00 | 0x41

    21.41.31 #16 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    21.41.31 #17 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    21.41.31 #18 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    21.41.31 #19 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 4x (5.540 KB/s)

    21.41.31 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    21.41.31 #21 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 14:10,279 (850279ms) -> OK

    21.41.31 #22 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    21.41.31 #23 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    21.41.31 #24 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    21.41.31 #25 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    21.41.47 #26 Text 0 File Cdrdrv.cpp, Line 1284
    21:41:47.143 - FREECOM_ DVD+/-RW4B\H3 T0 : Queue again later

    21.55.39 #27 SCSI -1135 File Cdrdrv.cpp, Line 1432
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x03360000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x22 0x51 0x80 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    21.55.39 #28 CDR -1135 File Writer.cpp, Line 311
    Write error

    21.55.39 #29 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    21.55.39 #30 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    21.55.39 #31 Text 0 File DVDR.cpp, Line 2410
    EndDAO: Last written address was 2249087

    21.55.39 #32 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    21.55.40 #33 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    21.55.40 #34 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 4x (5.540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20/12/2004 19.37.14 (Prassi/Veritas driver for win 2K)
    File 'Drivers\stealth.sys': Ver=3.16.0.0, size=80896 bytes, created 21/06/2002 9.58.24 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    Now I try to view the disc but I can't.
    How can resolve this problem?
    Thx, sorry for the english i?m italian
     
    Last edited: Dec 12, 2005
    simoza, Dec 12, 2005
    #53
  14. HugoFSous

    HugoFSous Member

    Joined:
    Dec 27, 2005
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    I've not been able to burn a DVD for a week...
    I used to do it, but now, i've got a message that tells that disc is ilegal... Here is the log (hope u can help me):




    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23-12-1997 0:23:24
    ahead WinASPI: File 'C:\Programas\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 18:35:34
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e
    (Nero Express)
    Recorder: < DVD+RW RW8165> Version: 1.01 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 8192kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: < DVD+RW RW8165 >Version: 1.01 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MHT2040AT atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : DVD+RW RW8165 atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    DVD+RW RW8165 D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte



    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (523248kB)
    Free physical memory: 56MB (57964kB)
    Memory in use : 88
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.12.2005
    Compilação ISO
    15:09:41 #1 Text 0 File Isodoc.cpp, Line 6359
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:09:41 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:09:41 #3 Text 0 File Writer.cpp, Line 122
    Writer DVD+RW RW8165 running

    15:09:41 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    15:09:41 #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    15:09:41 #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2147839 (477:17.64, 4194MB)

    15:09:41 #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    15:09:41 #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: DVD+RW RW8165, Media type: DVD+R

    15:09:41 #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:09:41 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2147840 (2147840) = #2147840/477:17.65
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2147840 blocks [DVD+RW RW8165]
    --------------------------------------------------------------

    15:09:45 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [DVD+RW RW8165] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4398776320, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2147840 | lead-out | 1 | 0x41 | 0x00

    15:09:45 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    15:09:45 #13 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    15:09:45 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    15:09:45 #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5.540 KB/s)

    15:09:45 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:09:45 #17 SCSI -1066 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BC10600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
    0x00 0x00 0x00 0x00 0x24 0x00

    15:09:45 #18 SCSI -1066 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
    0x00 0x00 0x00 0x00 0x24 0x00

    15:09:45 #19 Text 0 File DVDR.cpp, Line 6168
    Drive: DVD+RW RW8165
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished successfully, return code 0

    15:09:45 #20 CDR -1207 File DVDR.cpp, Line 5306
    Book Type automatically set to: DVD-ROM

    15:09:45 #21 Text 0 File DVDPlusRW.cpp, Line 659
    Start write address at LBA 0
    DVD high compatibility mode: No

    15:09:47 #22 SCSI -1046 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06E20000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
    0x00 0x00 0x00 0x00 0x30 0x05

    15:09:47 #23 CDR -1046 File Writer.cpp, Line 311
    Illegal disc

    15:09:47 #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    15:09:48 #25 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    15:09:48 #26 SCSI -1046 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
    0x00 0x00 0x00 0x00 0x30 0x05

    15:09:48 #27 SCSI -1046 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
    0x00 0x00 0x00 0x00 0x30 0x05

    15:09:48 #28 SCSI -1066 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF9 0x15 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
    0x00 0x00 0x00 0x00 0x24 0x00

    15:09:48 #29 Text 0 File DVDR.cpp, Line 6168
    Drive: DVD+RW RW8165
    Book Type request [gen]: DVD+R, write to EEPROM
    Changing the Book Type was finished successfully, return code 0

    15:09:48 #30 CDR -1046 File WriterStatus.cpp, Line 167
    Illegal disc
    DVD+RW RW8165\H1 T0

    15:09:48 #31 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    15:09:48 #32 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5.540 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23-12-1997 1:02:46
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20-12-2004 18:37:14 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04-08-2004 5:59:42 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    HugoFSous, Dec 27, 2005
    #54
  15. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @simoza -

    hi and welcome, let's see if i can get you burning up a storm..

    - not too bad, 6.6.0.18 is latest 6.x version; (i used 6.6.0.0 with zero problems for quite a while myself)

    - i don't see many Freecom drives around these days. anyway, this link seems to have an older version of your firmware, 1.33, and that's dated April 2004!!, so unless Freecom's website has newer firmware, you're gonna have to stick to older blank discs (i know this drive is an OEM NEC ND-1300A so you're limited as to what speed blank media you can buy)

    - 4465MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space

    - i've heard of these discs but can't remember any details about them, or if they're any good

    - i'd try better blank discs as there's not much else wrong in the logfile





    @HugoFSous -

    hi and welcome also, let's see if i can get you burning up a storm too..(edit- no we won't as i recognise the problem straight away, your burner's firmware is too old)...here goes anyway.....

    - version 1.03 of your firmware is here, but dated April 2004!!, so the firmware is way out of date to cope with newer media.. - http://forum.rpc1.org/dl_firmware.php?download_id=1815

    - sufficient total memory but no free memory left. you need to close down more programs prior to ALL burning/dvd work to ensure sufficient free memory

    - your blank discs aren't being recognised, due to the firmware being so old. this is similar to what you should see -
    - ie a 3line paragraph when the firmware's up to date. The firmware has been neglected by Ricoh since April 2004 (unless their own website has something newer though i very much doubt it). see here for more info as i've gone into much detail on this particular drive/firmware over last few days - http://forums.afterdawn.com/thread_view.cfm/265841

    - see previous comment
     
    Last edited: Dec 28, 2005
    creaky, Dec 28, 2005
    #55
  16. HugoFSous

    HugoFSous Member

    Joined:
    Dec 27, 2005
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    To creaky


    Quote:Recorder: HL-DT-ST DVD-RW GWA-4082N, Media type: DVD-R
    Disc Manufacturer: TYG02 -
    Disc Application Code: 64, Disc Physical Code: 193

    - ie a 3line paragraph when the firmware's up to date. The firmware has been neglected by Ricoh since April 2004 (unless their own website has something newer though i very much doubt it). see here for more info as i've gone into much detail on this particular drive/firmware over last few days - http://forums.afterdawn.com/thread_view.cfm/265841

    i didn't understand this part...Sorry...Problems translating to portuguese...if u could explain it, in fewer words...or simpler...tks


    I really hope to fix this problem, 'cause i'm really pissed (sorry if i can't say it here) with this... Really annoying to not be able to burn my dvd's...

    Tks

    Ps. : how do i install firmware, once it's in a ric extension...
    Tks
     
    Last edited: Dec 31, 2005
    HugoFSous, Dec 30, 2005
    #56
  17. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @HugoFSous -

    snippet from the link i gave you in my logfile reply
    - Basically you need to keep finding older blank discs that your burner is able to use, as it's unable to use those newer discs. Or you need to buy a new burner (and i'd stay away from Ricoh, they don't seem to support their products for very long)
     
    creaky, Dec 31, 2005
    #57
  18. greavsy

    greavsy Member

    Joined:
    Jan 2, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    oreyt people help badly needed been looking for my updates but cant find anything when i try to burn dvds now or copy it says illegal disc really doing my headin i have a NEC Dvd rw nd 2500-a and have never updated the flash if someone could point me in the right direction i would be very thankful
     
    greavsy, Jan 2, 2006
    #58
  19. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @greavsy -

    let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar.

    You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
     
    creaky, Jan 2, 2006
    #59
  20. greavsy

    greavsy Member

    Joined:
    Jan 2, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16:35:34
    Nero Version: 6.6.0.8 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 1 TA 1 - 6.6.0.8
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <JLMS XJ-HD166S >Version: DTS6 - HA 1 TA 0 - 6.6.0.8
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3160022A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 1 DMA: Off
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 2 DMA: Off
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 3 DMA: Off
    CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.1b axvscsi Port 5 ID 0 DMA: Off

    === CDRom-Device-Map ===
    JLMS XJ-HD166S J: CDRom0
    _NEC DVD_RW ND-2500A K: CDRom1
    AXV CD/DVD-ROM L: CDRom3
    Generic DVD-ROM M: CDRom4
    Generic DVD-ROM E: CDRom5
    Generic DVD-ROM N: CDRom6
    Generic DVD-ROM O: CDRom7
    NERO IMAGEDRIVE2 D: CDRom2
    AXV CD/DVD-ROM P: CDRom8
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (523244kB)
    Free physical memory: 172MB (176684kB)
    Memory in use : 66 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.1.2006
    UDF/ISO compilation
    13:05:18 #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    13:05:18 #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    13:05:18 #3 Text 0 File Isodoc.cpp, Line 6172
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    13:05:18 #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    13:05:18 #5 Text 0 File Reader.cpp, Line 127
    Reader running

    13:05:18 #6 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    13:05:18 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    13:05:18 #8 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    13:05:18 #9 Text 0 File DlgWaitCD.cpp, Line 259
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 908335 (201:51.10, 1774MB)

    13:05:18 #10 Text 0 File DlgWaitCD.cpp, Line 271
    Write in overburning mode: NO (enabled: CD)

    13:05:18 #11 Text 0 File DlgWaitCD.cpp, Line 2316
    Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    13:05:18 #12 Text 0 File DlgWaitCD.cpp, Line 433
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    13:05:18 #13 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 908336 (908336) = #908336/201:51.11
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 908336 blocks [_NEC DVD_RW ND-2500A]
    --------------------------------------------------------------

    13:05:18 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [_NEC DVD_RW ND-2500A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1860272128, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    908336 | lead-out | 1 | 0x41 | 0x00

    13:05:19 #15 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    13:05:19 #16 Text 0 File Burncd.cpp, Line 4040
    Cache writing successful.

    13:05:19 #17 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    13:05:19 #18 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2.4x (3,324 KB/s)

    13:05:19 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    13:05:19 #20 Text 0 File DVDR.cpp, Line 2194
    Recording mode: Sequential Recording Mode

    13:05:19 #21 Text 0 File Mmc.cpp, Line 21235
    Set BUFE: Buffer underrun protection -> ON

    13:05:19 #22 Text 0 File DVDR.cpp, Line 2340
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    13:05:19 #23 Text 0 File Cdrdrv.cpp, Line 8430
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    13:05:19 #24 SCSI -1046 File Cdrdrv.cpp, Line 1181
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x0D 0xDC 0x30 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    13:05:19 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1765
    Illegal disc

    13:05:19 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1765
    Could not perform start of Disc-at-once

    13:05:19 #27 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=6.1.1.42 , size=24698 bytes, created 09/01/2004 15:01:56
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20/12/2004 18:37:14 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 00:27:50 (Adapter driver for rec)
     
    greavsy, Jan 2, 2006
    #60
Page 3 of 16

Share This Page