New Starview UK & IRL Combo Files 26/05/2010

i must say your last guide for loading the firmware was more exact as to the 1 above,
as to what is on the first line you can not do until you load firmware on box
it may confuse people who are about to try and do it for the first time,
link

 

Cheers m8 ........ Tut has been sorted !! sorry for confusion.

 

Hi, thanx for the new files you posted, but i just can't get the uk file to work and I'm at my wits end. Would really appreciate any advice you could give. Updated the box without any problems but when i try to connect to ustream i keep getting this message " Login is failed - Error (206)". Any ideas where i'm going wrong?

 

have you followed the instructions exact

 

Yes, I've tried several times. The thing is the update seems to have gone well, just will not connect to the server and I can't figure out why.

 

also is it the starview combo that you have?

 

Yes m8 it is starview hd combo with lan. I've been searching forums but the only person I found with a similar error code(206) had mistakenly changed the MAC address of his box but mine seems correct as i've checked against the sticker inside the box. Can only think it's some sort of lan, router or firewall issue but don't know a lot about networking so I wouldn't know how to troubleshoot them. I managed to ping the box and got a reply and I know the cable going to my router is sound because I was able to use the home streaming facility.

 

are you letting the mac address automatically install!
also do you have the emu/keycode on also everything on inside it
and press reset data above that
in the osd setup do you have region uk
in network ip setup did you press auto and apply that
in net application = ustream

also cable & broadband in back of box

 

Hi
am letting the mac address automatically install.

Don't know about emu/keycode - Have

ACCESSORY > KEY EDIT > UCAS set to on
UCAS AUTOROLL set to on

Don't know if this is what you mean?

Don't have a region in OSD setup but have:-

SYSTEM SETTINGS > CONTROL PANEL > LOCAL AREA set to England

Not sure if this is the same thing?

Am on AUTO for IP SETUP.

Don't have NET APPLICATION but have:-

ACCESORY > NETWORK > CS NET set to USTREAM and connection status goes from
connecting to "Login is failed - error code (206)

 

is dis updated file?

 

file on first page yes

also @bignose i just sent you a pm try it and see how it goes and remember to us the correct file for your box

 

I'm having a problem installing the Irish file on the box. Followed the instructions i.e. download file onto FAT32 USB then go into the Accessory menu but when try and install the file i.e. click ok, it installs about 20% then gives following error message.

Update fail. Please check your usb memory

I've tried different usb sticks so don't think that is the problem. Any ideas?

 

Download the file again, just in case it is a problem with the file.

 

Did you format the usb device before you used it if not format the usb drive to fat32 then try the usb stick again

 

Think problem was that i have st*rview hd combo+ and this thread is just for combo? It's the wrong firmware in this thread.

Anyway, i've managed to put on f*rmware detailed in previous thread below but still not quite there as there are two files to flash at diff times and a bit awkward. Can you confirm that method in thread below is correct?

http://forums.v4.afterdawn.com/t.cf...bo_unit_file_this_is_not_nagra_3_fix-813135/3

 

this file is for the combo + box not the combo, if ya used the wrong firmware ya would brick yer box

 

Starview combo is the starview combo + Hd box same thing

here is the latest files available for that box you dont need any other firmware

http://forums.afterdawn.com/t.cfm/f-59/new_starview_uk_irl_combo_files_26_05_2010-850616/

 

Back to original problem then that can't put the f*rmware at the beginning of this thread on the box... i still can't get it beyond loading 20% then it giving error message.

Update fail. Please check your usb memory

Not sure what to do from here. Does the method using the f*rmware detailed in previous thread (see below) that i managed to get on the box still work?

http://forums.v4.afterdawn.com/t.cfm/f-5..._3_fix-813135/3

 

did you format your usb device to fat32 first before you started to load the firmware to the usb ??