This is my problem. I burn four or five DVDs ok, but, the next DVD give me a pma update failure. I change the dvd, and burn it ok. Five or four, or six dvds ok, and the next, crash, the error again. I read a similar thread on this forum. He update the DVD shrink version and ok, but i have the last version of shrink. Important.... The problem began when i clened my pc, and reinstall all again, when i format my disc. Sorry about my poor english, i wish you understand me, and help me. This is the log. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Archivos de programa\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16:21:30 Nero Version: 6.6.0.6 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A102 - HA 1 TA 1 - 6.6.0.6 Adapter driver: <IdeChnDr> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST CD-RW GCE-8526B >Version: 1.04 - HA 1 TA 0 - 6.6.0.6 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SV2001H IdeChnDr Port 0 ID 0 DMA: On DiskPeripheral : WDC WD800BB-00CAA1 IdeChnDr Port 0 ID 1 DMA: Off CdRomPeripheral : HL-DT-ST CD-RW GCE-8526B IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST CD-RW GCE-8526B F: CDRom0 HL-DT-ST DVDRAM GSA-4163 G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (523056kB) Free physical memory: 209MB (214436kB) Memory in use : 59 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.6.2005 Compilación UDF/ISO 16:23:12 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 16:23:12 #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 16:23:12 #3 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 16:23:12 #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 16:23:13 #5 Text 0 File Reader.cpp, Line 127 Reader running 16:23:13 #6 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4163B running 16:23:13 #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 16:23:13 #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 16:23:13 #9 Text 0 File Burncd.cpp, Line 3155 Turn on Disc-at-once, using DVD media 16:23:13 #10 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 16:23:13 #11 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO (enabled: CD) 16:23:13 #12 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: FUJIFI - LM03 Disc Application Code: 64, Disc Physical Code: 193 16:23:13 #13 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= 16:23:13 #14 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 16:23:13 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 16:23:13 #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 16:23:13 #17 Text 0 File Burncd.cpp, Line 4042 Cache writing successful. 16:23:13 #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 16:23:13 #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11.080 KB/s) 16:23:13 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 16:23:13 #21 Text 0 File DVDR.cpp, Line 2300 Recording mode: Sequential Recording Mode 16:23:13 #22 Text 0 File Mmc.cpp, Line 21079 Set BUFE: Buffer underrun protection -> ON 16:23:13 #23 Text 0 File DVDR.cpp, Line 2441 Start write address at LBA 0 DVD high compatibility mode: Yes 16:23:13 #24 Text 0 File Cdrdrv.cpp, Line 8332 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 16:23:13 #25 Text 0 File DVDR.cpp, Line 4875 Drive: HL-DT-ST DVDRAM GSA-4163B Book Type request [LG]: DVD-ROM Book Type setting not supported for the loaded disc type 16:23:55 #26 SCSI -1194 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03DE0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x32 0x38 0x00 0x0C 0x73 0x04 16:23:55 #27 CDR -1194 File Writer.cpp, Line 311 PMA update failure 16:23:55 #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 16:23:56 #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 16:23:56 #30 Text 0 File DVDR.cpp, Line 2682 EndDAO: Last written address was -1 16:23:56 #31 Text 0 File DVDR.cpp, Line 4875 Drive: HL-DT-ST DVDRAM GSA-4163B Book Type request [LG]: DVD+R Book Type setting not supported for the loaded disc type 16:23:56 #32 CDR -1194 File WriterStatus.cpp, Line 167 PMA update failure 16:23:56 #33 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 16:23:56 #34 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11.080 KB/s) Existing drivers: File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14/08/2002 00:00:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Thanks
OK then, you need to turn on your DMA for a start. Burn at 4x maximum. It also says medium error. That means that your burner does not like your media. Try Verbatim, Ritek or TY discs. Also, modify size of disc to be burnt to 4300MB, not 4438 (or whatever it is!) Pulsar
Disc Manufacturer: FUJIFI - LM03 so so media. heres a guide to check your DMA. http://forums.afterdawn.com/thread_view.cfm/76265 You might also check to make sure your firmware is up to date.
@diegote44 - in addition to the other guys' replies - - slightly newer firmware version here - http://forum.rpc1.org/dl_firmware.php?download_id=1973 - sort out DMA as requested by other guys - you're burning virtually to outer edge of discs, if you use DVD Shrink, set the target size to 4300MB in preferences, therefore avoiding edge of disc and not sacrificing much space - hmmm... - your burner doesn't recognise/like that disc - symptom of other problems - oops! - whoa!, slow it down to say 4x - not heard of those IDE drivers before, they sound too old
HI diegote44 ,, i had the same problem with my lg 4163b ..actually it has nothing to do with DMA , fast seep or media type .. it doesn't happen with +R disks I think this is hardware problem witch would not effect +R discs becouse LG 4163 b uses deffrent writing methods for +R(Sequential Recording) and -R(Incremental Recording) discs. it stats happening after burning few(over 150 discs in my case) DVD-R Discs with nero or dvd shrink (shrink uses nero to burn anyway). And it only happens when you burn book type dvds. Book type dvds includes "dvd movies without menu" (it does't matter weather you have book type option checked or not checked in DVD shrink backup options) or data DVD in nero .you can still burn -R discs with shrink if you are including menus and the book type option is not ckecked.. Or you can use some orther sw like "Copy to DVD" or "DVD Clone" for your rest of -R DVDs .And make sure next time you buy + R discs.
@loop7 - erm, thanks for that, 'fraid i couldn't understand most of it. glad you found a solution for YOU, however the logfiles don't lie, so until we fix ALL problems within a logfile the person in quetion will still have problems.. maybe you could edit your post as am afraid it doesn't make sense...
