Sony DVD+-RW DW-D56A I/O error trying to burn etc. after dvd shrink backup solve this one!

I keep getting an I/O error most of the time with image burn and copytodvd, nero recently gave me this error. My burner never completes a DVD BTW. I use normally some cheap dvd-r but I have also tried verbatim dvd-r and the same result...

Please help someone. Any ideas?




Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 3:51:12 PM
Nero version: 6.6.0.1 (Nero Express)
Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD+-RW DW-D56A >Version: PDS7 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD+-RW DW-D56A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047932kB)
Free physical memory: 579MB (593544kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.2.2007
Burn DVD Image
3:20:36 AM #1 Text 0 File Reader.cpp, Line 127
Reader running

3:20:36 AM #2 Text 0 File Writer.cpp, Line 122
Writer SONY DVD+-RW DW-D56A running

3:20:36 AM #3 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

3:20:36 AM #4 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286002 (508:00.02, 4464MB)

3:20:36 AM #5 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

3:20:36 AM #6 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: SONY DVD+-RW DW-D56A, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR008
Disc Application Code: 64, Disc Physical Code: 193

3:20:36 AM #7 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:20:36 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286003 (2286003) = #2286003/508:0.3
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286003 blocks [SONY DVD+-RW DW-D56A]
--------------------------------------------------------------

3:20:36 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [SONY DVD+-RW DW-D56A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681734144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286003 | lead-out | 1 | 0x00 | 0x41

3:20:36 AM #10 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

3:20:36 AM #11 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

3:20:36 AM #12 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

3:20:36 AM #13 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 4x (5,540 KB/s)

3:20:37 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

3:20:37 AM #15 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 14:10,234 (850234ms) -> OK

3:20:37 AM #16 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode

3:20:37 AM #17 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Power-Burn -> ON

3:20:37 AM #18 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

3:20:37 AM #19 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

3:22:18 AM #20 Text 0 File Cdrdrv.cpp, Line 1284
03:22:18.031 - SONY DVD+-RW DW-D56A\H1 T0 : Queue again later

4:11:03 AM #21 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03480000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x11 0x80 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

4:11:03 AM #22 CDR -1135 File Writer.cpp, Line 311
Write error

4:11:03 AM #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:11:03 AM #24 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

4:11:03 AM #25 Text 0 File DVDR.cpp, Line 2410
EndDAO: Last written address was 1146975

4:51:05 AM #26 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

4:51:05 AM #27 CDR -1080 File WriterStatus.cpp, Line 167
Disc not present

4:51:05 AM #28 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

4:51:05 AM #29 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

4:51:05 AM #30 Phase 39 File dlgbrnst.cpp, Line 1853
Burn process aborted


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/25/2005 11:03:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 7:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

REMOVE YOUR NERO SERIAL NUMBER,

 

its gone

 

My post has been edited and the recommendations withdrawn because of members statement.

 

That doesnt seem right to me because why would imgburn not work as well?

 

You're the one with the problem, I am the one who has recommended fixes....YOU DO AS YOU WISH

I have edited my post and removed recommendations as you seem to know more than I do

 

Wow. Well I didn't think that would offend you but I guess it did. I apologize. I always think two heads are better than one. Thank you for your suggestions, I appreciate them.

 

what does the dma do and what will enabling it do...how do I enable it?

 

You were given the solution, but you "didnt think it was right"

In future if you expect to be helped, please accept the info given to be correct

Update your Nero to 6.6.0.18 from here, both packages


Package 1:
http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe
Package 2:
http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe

DMA needs to be on, heres a guide to turn back on

http://forums.afterdawn.com/thread_view.cfm/260038

and stop using crappy discs...try Verbatim

 

Did all that you said above now:
This time it didn't even get through the lead-in with a power collaboration error.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD+-RW DW-D56A >Version: PDS7 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD+-RW DW-D56A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047932kB)
Free physical memory: 524MB (537540kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.3.2007
UDF compilation
11:43:13 PM #1 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Revision : 1.02
UDF Partition Type : physical

11:43:13 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

11:43:13 PM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD+-RW DW-D56A running

11:43:13 PM #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

11:43:13 PM #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286383 (508:05.08, 4465MB)

11:43:13 PM #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

11:43:13 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD+-RW DW-D56A, Media type: DVD-R
Disc Manufacturer: CMC MA - G.
Disc Application Code: 64, Disc Physical Code: 193

11:43:13 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:43:13 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286384 (2286384) = #2286384/508:5.9
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286384 blocks [SONY DVD+-RW DW-D56A]
--------------------------------------------------------------

11:43:13 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD+-RW DW-D56A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682514432, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286384 | lead-out | 1 | 0x41 | 0x00

11:43:14 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:43:14 PM #12 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

11:43:14 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:43:14 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

11:43:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:43:14 PM #16 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode

11:43:14 PM #17 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Power-Burn -> ON

11:43:14 PM #18 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes

11:43:14 PM #19 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:43:38 PM #20 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x046B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

11:43:38 PM #21 CDR -1106 File Writer.cpp, Line 311
Power calibration error

11:43:38 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:43:38 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:43:38 PM #24 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1

11:43:38 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/25/2005 11:03:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 7:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

Not really

You are still using poor quality discs, heres something for you to read about these discs, believe it or not, it's your choice

http://forums.afterdawn.com/thread_view.cfm/262544

 

The discs say verbatim on them. I'm almost positive they are... Bought them at comp usa.

Detail: Verbatim datalife DVD-R

 

The discs you are using, according to your log are CMC Mag discs, which are possibly the poorest quality disc on the market.
You have done the Nero update, turned your DMA back on so that leaves the discs.
Go to this link and d/l DVD Identifier and check your discs..the one you used for your last failure...in this log

http://www.softpedia.com/progDownload/DVD-Identifier-Download-7023.html

 

Im sorry but I dont know what you want me to check at that site. But the disc I used say Verbatim on the front is it possible nero messed up the analysis?
Yea the identifier did say cmc mag this is confusing to me. Ok I'll try better discs then get back to you.

 

The prog I wanted you to D/L is DVD Identifier (heres a better link), it will tell you all about the disc you are using, I will be surprised if Verbatim are letting CMC Mag manufacture their discs...and NO Nero identifies them as it sees them...CMC Mag.

http://www.afterdawn.com/software/video_software/dvd_tools/dvd_identifier.cfm

Are you CERTAIN these CMC Mag discs are branded Verbatim

 

With TDK disc this time. Same emediate burn fail before lead in finish even.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD+-RW DW-D56A >Version: PDS7 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD+-RW DW-D56A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047932kB)
Free physical memory: 504MB (516504kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.3.2007
Burn DVD Image
12:54:12 AM #1 Text 0 File Reader.cpp, Line 127
Reader running

12:54:12 AM #2 Text 0 File Writer.cpp, Line 122
Writer SONY DVD+-RW DW-D56A running

12:54:12 AM #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

12:54:13 AM #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286002 (508:00.02, 4464MB)

12:54:13 AM #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

12:54:13 AM #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD+-RW DW-D56A, Media type: DVD-R
Disc Manufacturer: TDKG02 - 000000
Disc Application Code: 64, Disc Physical Code: 193

12:54:13 AM #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:54:13 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286003 (2286003) = #2286003/508:0.3
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286003 blocks [SONY DVD+-RW DW-D56A]
--------------------------------------------------------------

12:54:13 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD+-RW DW-D56A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681734144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286003 | lead-out | 1 | 0x41 | 0x00

12:54:14 AM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

12:54:14 AM #11 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

12:54:14 AM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

12:54:14 AM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

12:54:14 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:54:14 AM #15 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode

12:54:14 AM #16 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Power-Burn -> ON

12:54:14 AM #17 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes

12:54:14 AM #18 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:54:36 AM #19 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x035E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

12:54:36 AM #20 CDR -1106 File Writer.cpp, Line 311
Power calibration error

12:54:36 AM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:54:36 AM #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

12:54:36 AM #23 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1

12:54:37 AM #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/25/2005 11:03:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 7:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

Power calibration errors can be due to media, firmware, or hardware failure

TDK is NOT on the list of GOOD quality media, are you using a Desktop comp or a Laptop.