starview box channels disappearing

You need the UK fix's look here >>>>>>>>

http://forums.afterdawn.com/thread_view.cfm/730458

 

Thanks. I have thebox super - what link do I click on for the uk codes. Sorry totally new at this

 

You need to update your box, we do not discuss that subject at all on this forum.

 

You might have a look here >

http://forums.afterdawn.com/thread_view.cfm/730458#4434775

 

hi can someone point me in the right direction in order to updating new software onto my eurovox max red box. is it on 4sharing? and if so which file needs to be downloaded as there are a few different types? do i need to download some other software in order to get the box software working?

thanks

 

hi Des B im down here in cork and the channels are going is there anything i can do i noticed there was a simular problem in the uk last week was that ever resolved. id appreciate a little guidence thanks
kevin

 

See here and it will be your answer, it is what happened in the UK and it's those fix's you need. >>>>>>>>

http://forums.afterdawn.com/thread_view.cfm/730458#4434885

 

Hi folks

I think I had the same problem as Peter except all my channels are gone exept I only have RTE 1 and Setanta Ireland. All my channels said scrambles or bad channel. I went through the steps that you gave Peter below and nothing has changed except instead of saying Scrambled or bad channel it says data is being updated and nothing is happening.

Can you help. I'm not very tehnical but I am desparate because the only thing to watch is Eastenders, aaahhrrrgg.....



Menu > Factory Setting
PIN 0000
OK to delete

Turn box off at the back for a minute and turn back on

English > Installation
Choose Provider etc
Automatic Scan
Press OK
Channels found
Exit

Press Menu then 1570
Turn EMU key ON

Exit , exit , exit

 

Hi folks

I think I had the same problem as Peter except all my channels are gone exept I only have RTE 1 and Setanta Ireland. All my channels said scrambles or bad channel. I went through the steps that you gave Peter below and nothing has changed except instead of saying Scrambled or bad channel it says data is being updated and nothing is happening.

Can you help. I'm not very tehnical but I am desparate because the only thing to watch is Eastenders, aaahhrrrgg.....



Menu > Factory Setting
PIN 0000
OK to delete

Turn box off at the back for a minute and turn back on

English > Installation
Choose Provider etc
Automatic Scan
Press OK
Channels found
Exit

Press Menu then 1570
Turn EMU key ON

Exit , exit , exit

 

lukeire, im in Dublin and this happened to me on Tuesday, I followed the steps below(except resetting factory settings) last night and everything came back, but now this evening most channels are gone again. s*y 2 and s*y indie are loop though the updates 0% - 220 % and back again, so I think there might be some on-going work, hopefully it will come back soon!

Can I ask a stupd question, it what scenario would I need to update my firmware? my box updates itself and has done for the past 8 months, Im dreading the day when I need up flash up, is this when a new algorithm is being used and my existing firmware can decode?

 

Afraid its time to flash the box Alex all firmware was changed today... if you go to this page and download the UK fix even if your in Ireland:

http://forums.afterdawn.com/thread_view.cfm/722659

 

Evening Des. I see you've been a busy boy lately, hopefully Santa will bring you something nice next week

 

thanx Des your a star and a life saver

 

Hi Folks

Cheer for you help, just so you know I am not posting needlessly because I have scoured other tread with no success. I think I am in the same boat as Alex. Really don't know where to start with this, I have a starview "the Box", I assume that I just plug the box into my computer and download the stuff from the webpages below.

Starview 2 " The Box" :
http://www.4shared.com/dir/3042613/f6e3421c/sharing.html
change the GTRom from 4.00 to this one prior to downloading new SV 2 fix:
http://www.4shared.com/account/file/2934...403_051005.html

Is that correct? Will that load on to the box automatically?

I am a little bit out of my dept and I feel like something that rhymes with "Brick". But Bad Santa is on tonight and I really want to watch it.

Does anyone feel the same?

Cheers folks

 

Cheers malci, I have the Starview 3, The Box Super.
Is this the link i should use?
Box 3 Fix
http://www.4shared.com/account/dir/3042613/f6e3421c/sharing.html?sId=tOhlmgFEBduDwF6e#/

I've never updated firmware on the box before. There is no USB socket on my box, what kind of serial cable do I need?

Sorry for all the questions...!

 

This is the one you need for the Super >>>>

http://www.4shared.com/file/73849126/d49b5756/GTRom_Super_8102e_081129.html?dirPwdVerified=21830a3b

You will need a NULL MODEM lead go to here and have a look, different box same lead/s and connectivity okay >>>>>>>>>

http://forums.afterdawn.com/thread_view.cfm/674371

 

hi all. i have been tryin to sort out my starview 2 since early today. i have done a systemrestore and downloaded the new uk versions but still the same problem is happenin me, "model name is empty" in the loader box. i am really lost wit this i have tried everything., i think.

 

Cheers malci,

seems more straight forward than I taught. So I just connect the cable to my box, run the .exe file which brings up the GUI and hit download? Im currently running on API 6.00e_E, Boot ver 8.0, do I need to install an in between version or go straight to 8.02e?

This might be useful for any1 else updating the SV3 Box Super, handy install guide:
http://www.freewebs.com/boxsuper/