1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Focus or tracking error

Discussion in 'Nero discussion' started by Vijen, Feb 15, 2007.

  1. Vijen

    Vijen Member

    Joined:
    Feb 15, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Please help...I have an LG 4163B DVD writer and use Nero 6.6.0.18. It successfully writes only 2 out of 10 DVDS. I previously used 4X DVD's and they worked fine. I have now tried Verbatim and HP 16X DVD +R and experience problems 80% of the time. The errors that Nero reports are :- "Focus or tracking error",
    or "Illegal block size for command", or "could not perform disk at once".

    This occurs when I try writing DVD video or DVD data files. I have attached a log file below. Any help is greatly appreciated.

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2002/07/17 09:20:56 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004/10/26 06:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 3 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 3
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SAMSUNG CD-ROM SC-152A >Version: CA06 - HA 0 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    CdRomPeripheral : SAMSUNG CD-ROM SC-152A atapi Port 0 ID 0 DMA: Off
    DiskPeripheral : ST380013AS atapi Port 1 ID 0 DMA: On
    DiskPeripheral : ST3160827AS atapi Port 2 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 3 ID 0 DMA: On

    === CDRom-Device-Map ===
    SAMSUNG CD-ROM SC-152A F: CDRom0
    HL-DT-ST DVDRAM GSA-4163B E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047280kB)
    Free physical memory: 630MB (645696kB)
    Memory in use : 38 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    15.2.2007
    ISO compilation
    07:14:00 PM #1 Text 0 File Isodoc.cpp, Line 6359
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    07:14:00 PM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    07:14:00 PM #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4163B running

    07:14:00 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    07:14:01 PM #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    07:14:01 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1333055 (296:14.05, 2603MB)

    07:14:01 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    07:14:01 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
    Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 7

    07:14:01 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    07:14:01 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1333056 (1333056) = #1333056/296:14.6
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1333056 blocks [HL-DT-ST DVDRAM GSA-4163B]
    --------------------------------------------------------------

    07:14:03 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2730098688, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1333056 | lead-out | 1 | 0x41 | 0x00

    07:14:04 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    07:14:04 PM #13 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    07:14:04 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    07:14:04 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 12x (16,620 KB/s)

    07:14:04 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    07:14:04 PM #17 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: MCC.....
    Media type ID: 004
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
    23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    07:14:04 PM #18 Text 0 File DVDR.cpp, Line 5376
    Drive: HL-DT-ST DVDRAM GSA-4163B
    Book Type request [LG]: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    07:14:04 PM #19 CDR -1207 File DVDR.cpp, Line 5306
    Book Type automatically set to: DVD-ROM

    07:14:04 PM #20 Text 0 File DVDPlusRW.cpp, Line 659
    Start write address at LBA 0
    DVD high compatibility mode: No

    07:14:32 PM #21 SCSI -1039 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x03370000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x01
    CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
    0x35 0x01 0x00 0x0E 0x09 0x01

    07:14:32 PM #22 CDR -1039 File Writer.cpp, Line 311
    Focus or tracking error

    07:14:33 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    07:14:33 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    07:14:33 PM #25 SCSI -1039 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 3, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x01
    CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
    0x35 0x01 0x00 0x0E 0x09 0x01

    07:14:38 PM #26 CDR -1039 File WriterStatus.cpp, Line 167
    Focus or tracking error
    HL-DT-ST DVDRAM GSA-4163B\H3 T0

    07:14:38 PM #27 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    07:14:38 PM #28 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 12x (16,620 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 2002/07/17 08:53:02 AM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004/08/03 10:59:44 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  2. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,528
    Likes Received:
    0
    Trophy Points:
    116
  3. Vijen

    Vijen Member

    Joined:
    Feb 15, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Hi Gwendolin
    Thanks for the advice. I have updated firmware and tried to write another DVD (HP DVD +R 16X). Previosly I got the error/failue during lead-in. I know get a different error but during lead-out. See log below. Thanks again for your help.

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2002/07/17 09:20:56 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004/10/26 06:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 3 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 3
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SAMSUNG CD-ROM SC-152A >Version: CA06 - HA 0 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    CdRomPeripheral : SAMSUNG CD-ROM SC-152A atapi Port 0 ID 0 DMA: Off
    DiskPeripheral : ST380013AS atapi Port 1 ID 0 DMA: On
    DiskPeripheral : ST3160827AS atapi Port 2 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 3 ID 0 DMA: On

    === CDRom-Device-Map ===
    SAMSUNG CD-ROM SC-152A F: CDRom0
    HL-DT-ST DVDRAM GSA-4163B E: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047280kB)
    Free physical memory: 634MB (650180kB)
    Memory in use : 37 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    16.2.2007
    ISO compilation
    10:31:15 AM #1 Text 0 File Isodoc.cpp, Line 6359
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    10:31:15 AM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    10:31:15 AM #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4163B running

    10:31:15 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    10:31:16 AM #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    10:31:16 AM #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2160095 (480:01.20, 4218MB)

    10:31:16 AM #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    10:31:16 AM #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
    Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 7

    10:31:16 AM #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:31:16 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2160096 (2160096) = #2160096/480:1.21
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2160096 blocks [HL-DT-ST DVDRAM GSA-4163B]
    --------------------------------------------------------------

    10:31:17 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4423876608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2160096 | lead-out | 1 | 0x41 | 0x00

    10:31:17 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    10:31:17 AM #13 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    10:31:17 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    10:31:17 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 8x (11,080 KB/s)

    10:31:18 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    10:31:18 AM #17 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: CMC.MAG.
    Media type ID: M01
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
    23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
    01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

    10:31:18 AM #18 Text 0 File DVDR.cpp, Line 5376
    Drive: HL-DT-ST DVDRAM GSA-4163B
    Book Type request [LG]: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    10:31:18 AM #19 CDR -1207 File DVDR.cpp, Line 5306
    Book Type automatically set to: DVD-ROM

    10:31:18 AM #20 Text 0 File DVDPlusRW.cpp, Line 659
    Start write address at LBA 0
    DVD high compatibility mode: No

    10:38:33 AM #21 Text 0 File WriterStatus.cpp, Line 116
    <HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 2160096 (20F5E0h), lenght 0 blocks

    10:38:33 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    10:40:33 AM #23 SCSI -1169 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 3, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x08
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x10
    0x00 0x00 0x00 0x0E 0x04 0x08

    10:42:33 AM #24 SCSI -1169 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x038C5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x08
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x10
    0x00 0x00 0x00 0x0E 0x04 0x08

    10:42:38 AM #25 SCSI -1093 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 3, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
    0x3C 0x30 0x00 0x0E 0x02 0x00

    10:42:38 AM #26 SCSI -1093 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x038C5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
    0x3C 0x30 0x00 0x0E 0x02 0x00

    10:42:38 AM #27 CDR -1093 File ThreadedTransferInterface.cpp, Line 1916
    No seek complete

    10:42:38 AM #28 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1916
    Could not perform end of Disc-at-once

    10:42:39 AM #29 SCSI -1093 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 3, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
    0x3C 0x30 0x00 0x0E 0x02 0x00

    10:42:39 AM #30 Phase 127 File dlgbrnst.cpp, Line 1832
    Generating DVD high compatibility borders

    10:42:39 AM #31 CDR -1176 File WriterStatus.cpp, Line 167
    Session fixation error

    10:42:39 AM #32 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    10:42:39 AM #33 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 2002/07/17 08:53:02 AM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004/08/03 10:59:44 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  4. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,528
    Likes Received:
    0
    Trophy Points:
    116
    Since you posted your last log you have changed your brand of discs, these are HORRIBLE discs and more than likely the cauase of THIS failure. I recommend and use Verbatim or Sony (made in japan)...your last discs coded out as Verbs.... MCC, Media Type ID: 004...Stick with them!!

    Burning too fast for these crappy discs, slow to 4X which is the ONLY speed I burn at.

    Check out this guide and try to turn DMA back on

    http://forums.afterdawn.com/thread_view.cfm/260038
     
    Last edited: Feb 15, 2007
  5. Vijen

    Vijen Member

    Joined:
    Feb 15, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Hi Gwendolin
    I have more Verbatim's at home..will try them this evening and give you some feedback. I purchased these disks (HP DVD +R)at work hoping to solve the problem.
     
  6. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,528
    Likes Received:
    0
    Trophy Points:
    116
  7. Vijen

    Vijen Member

    Joined:
    Feb 15, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Yikes! Some of those DVD's really stink. How do you know who the actual manufacturer is when you purchase disks. I thought I was getting HP which is considered OK quality - the disks are branded HP?

    Do you need an empty DVD to perform these tests with Nero. I would like to test the varius DVD's that I have but cannot get the test started (greyed out in Nero)
     
  8. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,528
    Likes Received:
    0
    Trophy Points:
    116
    Last edited: Feb 16, 2007
  9. Vijen

    Vijen Member

    Joined:
    Feb 15, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Hi Gwendolin

    I have written 3 Verbatims successfully at 8X. Seems like the problem is solved. Thanks for your help...I will try not to buy the crappy disks again.

    I managed to use CD-DVD Speed on another pc. The HP (CMC Mag) disks have 100X more errors than Verbatim and Princo that I used previously.

    Thank again...Vijen
     

Share This Page